Awesome! Did you keep the stock hellcat injectors in? If so what was the duty cycle that high? I have a client who doesn’t want to opt for ID1050x so trying to find someone who has kept them stock instead of running out of injector on the dyno …
I guess it depends a lot on weather and elevation because my hellcat stock did over 640whp no mods. With full exhaust and intake I made over 700whp. I’m in SoCal. Was about 60 degrees the day off dyno.
At sea level, a few years ago, my 2017 Hellcat Challenger A8 made 653.9 to the ground. EXACTLY 7.5% drivetrain loss, and my girl was the weakest stock car that day. I'm about to get my 2022 Redeye Challenger dynoed. Same shop but definitely cooler time of year. Wicked cars!
Depends a lot on the dyno you use. Mustangs are notoriously ego-checks bc they tend to read a little lower than other dynos, which may or may not be more accurate but regardless you should orob go to another tuner lol
And i thought my zl1 was fast. I ran 11.4 quarter mile in my bone stock zl1 but this guy ran a 9.8 in his red eye and all he has was a tune for e85 and my jaw dropped, these hellcats when done right are STUPID. Get a couple mods and an actual tire setup and theyre a problem
Damn that’s nice! So this is on stock injectors and stock fuel pump? If so could you do just a 2.85 upper? And do you know what kind of power they would be around?
Part of me wants to do this to my Hellcat, but I daily drive it and a full tank only gets me like 220 miles now. 100 hp more and I'd probably be at 180. It's a quarter tank to go to work and back every day
@@Tfromthecity the parts used are in the comments of the video, also said what they are in the video. We don't have parts sales on our website, that is done via email, phone call, or in store purchase. If you want to purchase them from a website... they aren't that difficult to find since again.... we listed the brand and the specific parts that were used. Our clients.... prefer to deal with us directly rather than be a faceless website order.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
That torque at 2k rpm’s is amazing!!!!
Straight to the point seconds into the video. Appreciate good content
Thank you!
When my dawg says.."Here's what the graph looks like.." just know its a mic drop. Lol
In Georgia mid October dyno pull. 692rwhp stock except legmaker intake on manual 6 speed.
Awesome! Did you keep the stock hellcat injectors in? If so what was the duty cycle that high? I have a client who doesn’t want to opt for ID1050x so trying to find someone who has kept them stock instead of running out of injector on the dyno …
Thank you. Completely stock fuel system in the car. Injector Duty Cycle was 89% at factory shift point with an 11.5 afr.
Ok nice buddy it said sd Iam in San Diego ca hard to find mopar good techs out here
DAMB!!!!!!!!! Great video brother looking into doing something like that to my floppa but need to stack up a few more couns in the bank first🥹
Great job 🔥🔥 Nice mopar 😱
Thank you!
I guess it depends a lot on weather and elevation because my hellcat stock did over 640whp no mods. With full exhaust and intake I made over 700whp. I’m in SoCal. Was about 60 degrees the day off dyno.
If you take a look at the description we explain that the hellcats are between 560-580whp stock on our dyno.
At sea level, a few years ago, my 2017 Hellcat Challenger A8 made 653.9 to the ground. EXACTLY 7.5% drivetrain loss, and my girl was the weakest stock car that day. I'm about to get my 2022 Redeye Challenger dynoed. Same shop but definitely cooler time of year. Wicked cars!
Depends a lot on the dyno you use. Mustangs are notoriously ego-checks bc they tend to read a little lower than other dynos, which may or may not be more accurate but regardless you should orob go to another tuner lol
Yea I’m in south Florida and my bone stock hellcat made 645 whp(not a mustang dyno).
Where did you dyno your car? I’m in SoCal and I wanna dyno my 2019 redeye I stay in La I wanna see what my car will put down 😅
mod 1 , get an awesome haircut- easy 50 hp
Mod 2: red seats , gives you a good 500 horsepower
And i thought my zl1 was fast. I ran 11.4 quarter mile in my bone stock zl1 but this guy ran a 9.8 in his red eye and all he has was a tune for e85 and my jaw dropped, these hellcats when done right are STUPID. Get a couple mods and an actual tire setup and theyre a problem
They do very well with simple modifications and proper tuning
Jesus. That's bad ass
Thank you!
Damn that’s nice! So this is on stock injectors and stock fuel pump? If so could you do just a 2.85 upper? And do you know what kind of power they would be around?
Yes this is with all the factory fuel system. This is using a 2.85 upper pulley. If just doing the pulley it would be 650-670.
Nice vid. 👍 What size pulley did you use?
2.85" Upper
Went to a 2.85 pulley and you were able to keep the factory injectors and pump?
Part of me wants to do this to my Hellcat, but I daily drive it and a full tank only gets me like 220 miles now. 100 hp more and I'd probably be at 180. It's a quarter tank to go to work and back every day
Adding the power want decrease your fuel range anymore than it already is.... your right foot will though ;)
Where are you guys located? Can you install same upgrades on my 2017 challenger hellcat?
Greenville SC and we certainly can.
@@sdracingllc1594I'd like to get some more from you guys! How do i get in touch?? I'll come to South Carolina
This car gave me a woody
Hey buddy I see it say sd racing are in San Diego ca byy chance??
We are located in Greenville SC
I want some more power in my TRX. Do you recommend these mods for it?
Yes
so how much ovr hp are you making would you say ik stock is 707 also do you think with this exact setup you could run a redeye?
707 is to the crank, not the tire. The results of this car would be 813 to the crank.
@@sdracingllc1594what numbers do you think i could make with a legmaker intake and a 3.17 upper so i dont have to tune it and void warranty
@sdracingllc1594 what would 826whp be to the crank
How come this hell cat makes 580hp stock? I thought the standard was 707, am i missing something?
580 to the wheel 707 to the crank
Advertised numbers from Dodge are crank HP, this is whp
🔥🔥🔥
Where can order those parts?
Email us at sdracingllc@gmail.com and we can get them for you.
We’re do I unlock the pcm
You'll have to either send it in to HP Tuners or Diablosport for them to unlock it or purchase an unlock pcm from them
My 2015 charger makes 760
congratulations?
bro its enough power stock lol
enough is never enough lol
whats the website for the parts ?
Send us an email at sdracingllc@gmail.com and we can get you a quote.
@@sdracingllc1594 😑 it’s 2023 we not emailing anymore bro..
@@Tfromthecity well have fun then
@@sdracingllc1594 youd see way more support if you simply just told or showed us the website 🤣 i see why you quit yt
@@Tfromthecity the parts used are in the comments of the video, also said what they are in the video. We don't have parts sales on our website, that is done via email, phone call, or in store purchase. If you want to purchase them from a website... they aren't that difficult to find since again.... we listed the brand and the specific parts that were used. Our clients.... prefer to deal with us directly rather than be a faceless website order.