Dude, you even explained how these sensors work! top job. Question though: if you say that the engine is running rich, i think the computer is telling to turn up the amount of fuel, not down.
I cleaned my MAF and fixed the problem. There was no code, just stalled and ran lousy. Limped home. Used the right stuff to clean it that I got from the auto parts store. Did find, however, that when I cleaned it but forgot to hook up the electrical plug, my engine ran great, but THEN it threw a code. So, if your maf is acting up and you are on the road, try unplugging the connector to get your engine to run until you clean it and reconnect. You will need a device to clear your check engine light.
I do plan on doing one but it wont be on the truck since i did it at around 90k miles before i started youtube channel..should be similar to the trans am i plan on doing one on
Thanks, I just now doing my MAF again*( did CRC spray Ckean some, ** six plus years ago, & almost forgot “HOW to”…..similar in my CANYON 2007/4 CYL SL, @150,000 miles…**Interestingly, totally *cannot figure out in my “2015 Journey SE 4 CYL”….?? ( Dodge ,appears to unplug,then turn MAF SENSOR , OUT OF air Box line, immediately after AIR CLEANER box?.)… “ loose”, &remove???…Searching, for MOPAR ,ETC., , & MAF SENSOR now!
Bro I just looked at 3 other videos doing this same exact thing and this is 5x better explaining and showing how it's done my chevy malibu is all ucked up now
@@hitmanm818 have they checked and diagnosed possible issues with the vehicle speed sensor and wiring? Cause a problem with that can cause a variety of problems similar to a damaged transmission?
@@hitmanm818 yea and once they open it ur kinda stuck...well thats about what a rebuild would cost u..even online itd be 2k+ and then theyd need old one for core
so i cleaned my MAF sensor,throttle body and Air filter on my 2002 gti,it runs a little worse now i can verly hear the turbo now.Does it take time to quick in or?
Excellent break down of the purpose and way MAS functions
Dude, you even explained how these sensors work! top job.
Question though: if you say that the engine is running rich, i think the computer is telling to turn up the amount of fuel, not down.
I cleaned my MAF and fixed the problem. There was no code, just stalled and ran lousy. Limped home. Used the right stuff to clean it that I got from the auto parts store. Did find, however, that when I cleaned it but forgot to hook up the electrical plug, my engine ran great, but THEN it threw a code. So, if your maf is acting up and you are on the road, try unplugging the connector to get your engine to run until you clean it and reconnect. You will need a device to clear your check engine light.
Yea if the maf has a problem reading the airflow which is causing it to run bad..its a good way to know if u have an issue with the sensor as well
I bought a 2 lil cans to clean up the maf sensor and throtle body for my 2011 Chevy Colorado nice vid thanx saludos desde Ensenada México🍀🎶🍻👍
Sounds great, im sure cleaning em will help keep it running great🙂👍 saludos desde California
Great explanation!
Very well explained, ty
Thank you🙂
I like your presentation. I just subscribed. Thanks
Hi can i clean the maf after i driven the car or does the engine have to be cold thanks
Video on changing the rear differential fluid?
I do plan on doing one but it wont be on the truck since i did it at around 90k miles before i started youtube channel..should be similar to the trans am i plan on doing one on
Thanks, I just now doing my MAF again*( did CRC spray Ckean some, ** six plus years ago, & almost forgot “HOW to”…..similar in my CANYON 2007/4 CYL SL, @150,000 miles…**Interestingly, totally *cannot figure out in my “2015 Journey SE 4 CYL”….?? ( Dodge ,appears to unplug,then turn MAF SENSOR , OUT OF air Box line, immediately after AIR CLEANER box?.)… “ loose”, &remove???…Searching, for MOPAR ,ETC., , & MAF SENSOR now!
Thanks it worked good
Thats great🙂👍
Bro I just looked at 3 other videos doing this same exact thing and this is 5x better explaining and showing how it's done my chevy malibu is all ucked up now
Thank you🙂, i hope its able to help with the malibu
@@backyardchevy328 do you think 2500 for a rebuilt transmission is alot when the code is showing the input/output speed sensor?
@@hitmanm818 have they checked and diagnosed possible issues with the vehicle speed sensor and wiring? Cause a problem with that can cause a variety of problems similar to a damaged transmission?
@@backyardchevy328 they said they need to open the transmission to see what's messed up
@@hitmanm818 yea and once they open it ur kinda stuck...well thats about what a rebuild would cost u..even online itd be 2k+ and then theyd need old one for core
so i cleaned my MAF sensor,throttle body and Air filter on my 2002 gti,it runs a little worse now i can verly hear the turbo now.Does it take time to quick in or?
Kick
what did you use
Keep going 😝😝
Thank you🙂
@@backyardchevy328 😗
SLOW DOWN!
Yea i did notice that too
That's what pause is for bro . I have to rewind also.