The Auction BMW 335i gets some STAGE 2 Mods!
HTML-код
- Опубликовано: 30 сен 2021
- N54 Stage 2, let's see what breaks next.
CSF Radiators:
csfrace.eu/collections/3-seri...
Evolve Downpipes:
www.evolveautomotive.com/evol...
My Contact Details:
Instagram: @trhamza_
Email Enquiries: hamza_trh@hotmail.com 
Авто/Мото
Hamza giving us the UK 335i content we've been missing. Most of the 335i tuning is in America
"As with anything n54 the 1st step is disassembling the whole engine " 🤣🤣😂
Currently saving to buy one of these next year, great to see someone going through the motions of buying a rough one, sorting it out and then tuning it. Keep up the good work dude. Subscribed !
This is gonna be a sick project, can’t wait for further progress.
Props tonyiu for tackling the downpipe swap.......thstcwas quite involved, yet you appeared to do it calmly & without any major issues. The big smile on your face when you took the car for a test run through the tunnels says it all!! 👍
There was an advert at 1:30 that had to be removed post upload, so apologies about the jump cut.
Well done, you can see that you are a very skilled mechanic, quality!!!
Just learning as I go along mate! Thank you 👍🏼
Thanks for sharing, love the vids.
No problem! Thank you 👍🏼
Rated you tackling all of that. Great video keep them coming 👌🏼
Loving the vids Hamza especially during Melbourne’s current lockdown.
Love all this in depth stuff
Loving the diy vids solid content💯
You're heck of man for trying to do DP's on a RHD N54. Wouldn't even make my enemy do that job.
I run VRSF DP's with the stock cat-back and it's (IMO) one of the better sounding exhaust setup's, the best would be a full 3/3.5" single exit. Swap Depot done this config on there car and it reminds me of the 2J so much!
Was definitely a challenge but all part of the learning experience! Gonna check out that exhaust setup you mentioned 👌🏼
Love the diy videos, keep up the great work. During Acceleration, it sounds like it is surging. May want to check the Injectors.
Should put this against og's 335d 👍
It’s in the works defo - just need to do all my maintenance first before abusing it in a race 😂
100%, would be great to see a race while both are tuned but still on stock turbos (OG's 335d defo doesn't have hybrids at its current power level). Then a rematch once some new turbos are fitted. Would make for some great content!
U know
@@TRHamza what maintenance have you got to do?
Love the DIY videos 💯💯
N54 gang. Great to see content on the 335i TT, I’ve got a stage one with aero kit & same wheels, plus a gearbox map also.
Great video. Major Props for taking on that 'Devils' Job. Car is sounding sweet. Can't wait for more updates
when petrol is once again readily available 😕
Nice one Hamza. I love the 335i would love to buy a clean example and follow a similar pattern of upgrades. 🙌🏼
I love your enthusiasm working with the cars outside (nice yard btw) in the English weather.
My motor is all stock parts, but has a stage 1 map. It's currently running 340 bhp and 500 nm. It's good for 60 in about 4.5, maybe even a touch quicker in good conditions. I'm super interested to see what you're getting with these mods so far.
Nice.
Mine has stage 1 400hp 552nm
Soon stage 2 with bigger intercooler, aluminum chargepipe with bov and dual cone air filters
Nice.
Mine is currently stage 2+ 440hp and 650+nm.
Next will be pure stage 2 turbos 550+bhp and a lot of torque hah
@@Zsword92 I'm actually pondering on whether to start refurbing mine, getting into good condition, and pushing the power. How's you're handle the power it has now, how usable is it?
@@moonfly1 @Simple Gamer It's a great platform, especially if you can do the maintenance yourself. Get a walnut blast. Do the main oil leak areas first and use Genuine rubber, OFHG, Sump gasket, valve cover gasket, front crank seal. Replace the serpentine belt and tensioner if it hasn't been done or the belt has oil on it. Get an upgraded PCV valve. Replace the valve cover if weeping oil or visibly cracked. Again use Genuine OEM. Put new coils and colder plugs if tuned and getting misfires. Check the gap first. See if you have index 11 or 12 injectors. Replace all vacuum lines around engine bay if not holding vacuum. Get an aluminium charge pipe! If you want to go an E85 mix, upgrade your LPFP and expect to go through oxygen sensors faster. You might also need a flex-fuel sensor and a port injection kit. Do oil changes at much shorter intervals than BMW suggests. Also there's no such thing as a "lifetime oil" for differential and transmission like BMW would have you believe. Mine handles the power pretty well, although I have to limit the boost in 1st and 2nd or it spins the Michelin PSS 255s to smoke instantly. My Quaife LSD helps, but more in corner exit and predictable powerslides. The car squirms under acceleration if the road isn't the best, I'll do the m3 subframe bushings and BMS diff lockdown to help with that. These cars can never put power down like a true M car, but with heavy modification they can be close!
@@Zsword92 lol that's a big list, done most of the stuff on there except LSD and flex fuel setup, proper Maintenance is a must for N54 👍
On MHD stage 1+ and XHP stage 3,with Wagner FMIC and VRSF Charge Pipe, should be somewhere around 390bhp.
With hybrid turbos they can easily exceed M car performance levels, I've seen 500bhp, 600bhp and 700bhp cars.
Fair play to you bro! Good job on doing the bits 👏🏾 more of this please 💪🏾
Thank you bro! 🙌🏼 Its such a rewarding feeling haha
@@TRHamza I bet! You couldn't have picked a worse engine to play with though 😂 always happy to help if you need it though 👐🏾
Yes my bro Man like Hamza back with another one what a Beast this Car will be and is turning into man great little car this is man great Content as always man you put out the sickest Videos out on RUclips man I love it big supporter of your channel since the EP3 Days man what a journey it's been bro 😍❤
Great video man keep it up #ONIT
Sick content recently bro 👌🙌
Quality video as always. Content on point too. Would love to see a collab with Mat Armstrong!
only someone like hamza would remap their car with next to no fuel in the car...absolute balls of steel on you pal hahaha loving the vids!
Very Nice Video Hamza!!
If I remember right it's a Manual. Would recommend cdv delete (just push to together). Clutch pedal bump stop and trw M3 front control arms.
MHD just released a new throttle sensitivity setting. Put that straight to 1m.
For exhaust do the PE mod to the stock back box it's the best mod. No rattles or ugly rasp . Don't remove the rear cats that ruins the sound and also doesn't give much power increase. Plus won't pass an MOT
Have fun
the check engine light usually pops up with like 500km of driving if on stock tune
Hamza back with bang this is gonna be a bad boy project
Although if you’ve got access to a ramp it makes sense to remove the subframe, this job can be completed with it in place, the steering rack needs moving out of the way slightly to create space
Another great video Hamza. Hope you got some fuel in the end. Tesco's was the only place near me in Cheshire that didn't run out. I also need some 99 RON for my lawn mower as E10 will knacker it's tiny Honda engine :-)
BMWs do make for cool tuning cars. Love them!
Great video, thanks mate
In the minefield for a 335i , great content, , great delivery , top man
Enjoying the content!
Well seeing as the engine never landed on your head I think we can call it a success just from that alone !!!! Keep up the great content mate
Haha definitely! Thank you mate 👌🏼
enjoying the vids
Sounds great!
Fair play for tackling that, didn’t look easy
That did look like a painful & frustrating job, fair play bro 😎👍
That easily mapped, well done..😀
Hi, enjoying your videos. Will you make a video upgrading the plastic charge pipe to an aluminium one? Would love to see this. Also not sure whether I want to upgrade the diverter valves & pipes or go for a BOV. Thanks
14:10 “Sometime later” 😂
Stage 2 🔥🔥
Get yourself some DCI's as the stock air box is very restrictive. Although the MHD OTS maps are good, a custom map is day and night and you can get the most out of the setup. I'm FBO with an aggressive custom map and my car has 160k on the clock. No issues at all.
Really good video. Better DIY makes you want to do it
17:19 the new joker laugh😂😂😂
Think it needs some new shoes🤭
Thanks for replying to my dm bro, messaged you after we met and you blanked it lol from the silver e92 owner
My bad bro - I don't always keep up with instagram messages, spend most of the time filming and editing. Was nice meeting you that day 👌🏼
This sounds way better than my E90 335i, maybe this has some sort of Performance Exhaust? Need to get mine sounding like this
*We need way more 335i videos*
Vargas inlets
Vrsf DP’s
CTs Turbo 7in FMIC
BMS DC’s/ CP + tmap adapter, push fittings
eBay BOV
AFE air scoops
Oem Turbo replacement
Did all work except turbos
No tune yet but I believe I can straight mhd 2+
That does sound nice 👌
Gotta change the charge pipe if your adding boost because the stock ones are plastic and will break
Ngl watching these bmw videos makes me miss your M2 haha
more great content
Nice rims ;D I have the same on mine :D
I done my old 335i downpipes on the drive withour dropping the subframe, 2 words, NEVER AGAIN😂😂😂 got it done but jesus it was full of neck and arm pain
Yo Hamza, replace your shifter knob with a shorter M sport one, absolute game changer for me
You should definitely get it walnut blasted
Will you turn the headrests the right way round please
Do insurance need to know anything about the mods ? It will increase it ? Will it pass MOT ?
Loving the content but whats happened to the Volvo???
I'm seriously thinking about getting a 335i, just looking at the moment. Was looking at the Cupra but going off it a bit. Any tips on what to look for when viewing one of these?
Just that the maintenance has been kept
on top of- problems include Injectors, water pump and thermostat, hpfp, oil filter housing gasket oil cooler gasket, valve cover gasket, waste gate rattle, weak stock charge pipe, carbon buildup on intake valves, vanos solenoids
Other than that they’re pretty solid lol
My.stage 1.5 335d e90 beats stage 1 335is would be interested to see how it would fair against a stage 2 335i.
I'm down for a little race for a bit of content if you want?
And I thought my mk6 gti was a nightmare to work on xD
Bruv u need a multi tool very handy !11
You mention the waste gate rattle does than mean turbos are enroute hamza
Mashallah sounds nice
Race Jamie’s 335d, that video would slap
did you get the uprated charge pipe, you can get one from forge with a bov.
Next on the list 👍🏼
@@TRHamza good good lol, its strange seeing the mods your doing, i did the same a few years back lol. Also be careful of the ECU, u may need to upgrade to MSD81, 335i groups from america do Rapid postage and better prices than the UK, u send them your CAS module and they send it back with a new ECU, plug and play and they remtely code it in for you aswel.
rough cost to get 600 hp on these?
17T hybrid turbos surely if wastegate rattle
Strange that power so low, I had a 335i 56 plate stage one no mods 380bhp
Yes,hamza, bro, was waiting for the next n54 vid, excellent content, 1 question ,I notice when i start my 335i e93 ,it stays on 1000 revs after a minute it goes down ,& quite, & exhaust gets little louder, is that normal?
It's called cold start. Cars force hot air through to warm the cats up so it runs better and quicker
If you get MHD you can turn cold start off. Your neighbours will thank you lol
@@user-fu9or4uk7t 👍🏼
Niiceee
post more!!
Nice
Loving the N54 content! Is it much louder with the downpipes Hamza, and is it raspy?
Thank you! And yes noticeably - but not unpleasantly loud. Has a nice amount of rasp I say
@@TRHamza Nice, thanks! I've just purchased a 2009 DCT with 45k miles from Japan :)
Quality content as always Marshallah 🔥🔥🔥🔥
How’s the m140i doing 👀
Videos soon 👌🏼
Nice set of mods!
Did you end up needing to replace the v band clamps? I know it’s advised to change the downpipe/turbo gaskets! Onto the next one now looking forward to it!
I think the driver headrest is on the wrong way around looks sick 😂
It’s just broken, the other side is a TV so defo right way round 🤣
Hi Hamza aslanim, do a single turbo build on the 335I
Ayyy
Give it a facelift, it’s pre lci
Race jamie's 335D
The H in Hamza stands for handson!!
Like share and subscribe 👆
Akon will buy this plate number.
The bottom of that rad/condenser looks crushed mate
Tube and fin is actually better
Assalam walaikum warehmatullahi wabarakatuhu
Why do you wear the same clothes on all your videos. Does this have any significance?😅
First
Trash car