Reserve Control System (invented after Kite Horror 4) /eng subs/
HTML-код
- Опубликовано: 25 июл 2021
- ⚠️ WARNING ⚠️ USE AT YOUR OWN RISK ⚠️ ONLY FOR EXPERT RIDERS ⚠️
Kite Horror 4 • Kite Horror 4 /eng subs/
Russian Control System • Russian Control System...
I used for RCS:
Cabrinha 8m Front Lower Lines - 2 pcs
🔗 www.cabrinha.com/products/8m-...
Ozone Stopper Ball - 2 pcs
🔗 ozonekites.net/proddetail.asp...
Dakine Carabiner from Shorty Kite Leash
🔗 kiteboarding.com/proddetail.a...
Video by Dmitry Evseev special for prydeclub.com supported by Pryde Club Mauritius, Cabrinha, Neilpryde, JP-Australia, Dakine Russia, Kites.Ru, Pro Standard Camera Accessories 
Спорт
very cool... keep thinking!
This system looks like promising ground work and I applaud your direction of thought for emergency situations like the one in the Horror 4 video. Application to twin tip kite boarding may need some adjustments so I am interested to see how this idea evolves 👍🏽
Continuing this idea: ruclips.net/video/Om1r0u6lKMU/видео.html
Excellent!
Since the lines most of the time get tangled closer to the bar, maybe you can come up with attachments you can use on the regular lines already attached so you don't have to switch lines. And you decide how much length you use. Those attachments can work on your short lines or the kite lines. In my opinion you have a legit product.
I have good solve for fix this problem
I will use 2m extenders
Nice way of thinking. Problem to improvement. Life hangs by two threads.
🤣
This should definitely get you to the shore unless you have to go hard upwind! Better this than nothing!
RESCUE PIGTAILS SYSTEM - a solution to the problem of self-rescue for kitesurfers in cases where a body drag with a kite in hands by self-rescue handles is ineffective (strong current, big waves, sharp corals, extremely cold water, etc.)
Included:
• 4 lines with loops at the ends, 2 meters long, which can be installed on absolutely any kite between the bridles and pigtails;
• 2 protective tubes 10 cm long (for example, rubber tubes, as on the pumping system between struts and the leading edge, or thermo-plastic tubes, as at the ends of the bar next to the floats), which are installed on the ends of the rear pigtails for protecting the hands in this place;
• Rope 4 mm thick, 5 cm long with loops at the ends, which is put on one of the pigtails with one loop, and the second loop is tightened on the knot of this pigtail.
How it works:
When the control system of the kite fails, we need to completely disconnect all four lines from the kite. Then we attach two front pigtails to the harness hook by a kite leash carabiner. On the next step we connect two rear pigtails to each other by tightening a free loop of 5 cm of the rope onto the knot of free pigtail, which was pre-installed on the other pigtail. We grab the protective tubes on the rear pigtails with our hands to control the kite. We return to the beach, either with a body drag, but with a flying kite, or standing on the board (for advanced riders, as in this video: ruclips.net/video/9VfZ2ObFPlw/видео.html).
P.S. Most likely different kite sizes will require different line lengths. So far I've only tested the system on the 7m kite with 2m lines on it. Must try with other kite sizes. But it would be better if kite manufacturers took care of this issue, and in the future they would release their kites with pigtails so long that they could emergency return to the beach in the manner described above.
Genius
Great idea! Would be good if you had 2 extra carabiner clips to clip from tangled bar to above the stopper balls. Easy way to carry your bar back in. Or possibly another 2m line extension to tie your bar so you can wear it on your back?
I found more simple solution! RESCUE PIGTAILS SYSTEM - a solution to the problem of self-rescue for kitesurfers in cases where a body drag with a kite in hands by self-rescue handles is ineffective (strong current, big waves, sharp corals, extremely cold water, etc.)
Included:
• 4 lines with loops at the ends, 2 meters long, which can be installed on absolutely any kite between the bridles and pigtails;
• 2 protective tubes 10 cm long (for example, rubber tubes, as on the pumping system between struts and the leading edge, or thermo-plastic tubes, as at the ends of the bar next to the floats), which are installed on the ends of the rear pigtails for protecting the hands in this place;
• Rope 4 mm thick, 5 cm long with loops at the ends, which is put on one of the pigtails with one loop, and the second loop is tightened on the knot of this pigtail.
How it works:
When the control system of the kite fails, we need to completely disconnect all four lines from the kite. Then we attach two front pigtails to the harness hook by a kite leash carabiner. On the next step we connect two rear pigtails to each other by tightening a free loop of 5 cm of the rope onto the knot of free pigtail, which was pre-installed on the other pigtail. We grab the protective tubes on the rear pigtails with our hands to control the kite. We return to the beach, either with a body drag, but with a flying kite, or standing on the board (for advanced riders, as in this video: ruclips.net/video/9VfZ2ObFPlw/видео.html).
P.S. Most likely different kite sizes will require different line lengths. So far I've only tested the system on the 7m kite with 2m lines on it. Must try with other kite sizes. But it would be better if kite manufacturers took care of this issue, and in the future they would release their kites with pigtails so long that they could emergency return to the beach in the manner described above.
Гениально
Нашёл ещё более простое и изящное решением : RESCUE PIGTAILS SYSTEM - решение проблемы самоспасения кайтсерферов в случаях, когда бодидраг с кайтом в руках малоэффективен (сильное течение, большие волны, острые кораллы, экстремально холодная вода и т.д).
В комплекте:
• 4 стропы с петлями на концах длиной 2 метра, которые можно установить абсолютно на любой кайт между куполом и пигтейлами;
• 2 защитные трубочки длиной 10 см (например, резиновые как на системе накачки между поперечными и основным баллоном или термо-пластиковые как на законцовках у планок рядом с поплавками), которые устанавливаются на концы пигтейлов задних строп для того, чтобы стропы не резали руки в этом месте;
• Верёвочка толщиной 4 мм длиной 5 см с петлями на концах, которая одной петлёй одевается на один из пигтейлов, а вторая петля накидывается на узел этого пигтейла.
Как это работает:
Когда основная система управления кайтом выходит из строя, мы полностью отсоединяем все четыре стропы от кайта. Два центральных пигтейла с помощью карабина кайт лиша присоединям к крюку трапеции. Два боковых пигтейла соединяем между собой, накидывая на узел одного из пигтейлов свободную петлю 5 см верёвочки, заранее установленную на другом пигтейле. Берёмся руками за защитные трубочки на боковых пигтейлах для управления кайтом. Возвращаемся на берег, либо бодидрагом, но с летящим кайтом, либо стоя на доске (для продвинутых, как в этом видео: ruclips.net/video/9VfZ2ObFPlw/видео.html).
P.S. Скорее всего для разных размеров кайтов понадобятся разные длины строп. Я пока испытывал систему только на 7м кайте, устанавливая на него 2м стропы. Надо попробовать с другими размерами кайтов. Но лучше бы производители кайтов озаботились этим вопросом, и в будущем выпускали свои кайты с такой длиной пигтейлов, чтобы на них описанным выше образом можно было возвращаться на берег в случае необходимости.
this makes a lot of sense especially if your lines rip, but is it possible to kite with a surfboard or twintip or is it only for a foil?
It is easy for foil but I tested it with surfboard too. Works too: ruclips.net/video/nchUWOC61qA/видео.html
It is a nice idea but mostly on lighter winds when foiling. If you're on a TT in heavy wind it's much safer to make a raft out of your kite and sit on it. It's also not so safe to deal with raw lines as they can cut into your skin in higher winds. All in all clever thinking but for most of us if we'd find ourselves in the situation like you in the previous video it makes more sense to call for help. Many bad things could have happened.
interesting. How would you attach this when out on the water?
Same way like I did it in Kite Horror 4 with my regular kite lines: ruclips.net/video/0hu4eq-K3II/видео.html
Did You try use the Kite without lines…Something like use the wing? Watching Your Kite horror movie ( amazing job 👏) and this one, I start wondering about this solution…. Regards🤙
RESCUE PIGTAILS SYSTEM - a solution to the problem of self-rescue for kitesurfers in cases where a body drag with a kite in hands by self-rescue handles is ineffective (strong current, big waves, sharp corals, extremely cold water, etc.)
Included:
• 4 lines with loops at the ends, 2 meters long, which can be installed on absolutely any kite between the bridles and pigtails;
• 2 protective tubes 10 cm long (for example, rubber tubes, as on the pumping system between struts and the leading edge, or thermo-plastic tubes, as at the ends of the bar next to the floats), which are installed on the ends of the rear pigtails for protecting the hands in this place;
• Rope 4 mm thick, 5 cm long with loops at the ends, which is put on one of the pigtails with one loop, and the second loop is tightened on the knot of this pigtail.
How it works:
When the control system of the kite fails, we need to completely disconnect all four lines from the kite. Then we attach two front pigtails to the harness hook by a kite leash carabiner. On the next step we connect two rear pigtails to each other by tightening a free loop of 5 cm of the rope onto the knot of free pigtail, which was pre-installed on the other pigtail. We grab the protective tubes on the rear pigtails with our hands to control the kite. We return to the beach, either with a body drag, but with a flying kite, or standing on the board (for advanced riders, as in this video: ruclips.net/video/9VfZ2ObFPlw/видео.html).
P.S. Most likely different kite sizes will require different line lengths. So far I've only tested the system on the 7m kite with 2m lines on it. Must try with other kite sizes. But it would be better if kite manufacturers took care of this issue, and in the future they would release their kites with pigtails so long that they could emergency return to the beach in the manner described above.
Сильный ветер, смотанная планка на кайте, болтающийся рядом ГФ+ещё какое-нибудь осложнение....и надо планку отсоединить и присоединить стропы, вот что снимать надо и объяснять как...)
Лучше конечно не попадать в такое...
Ха-ха))) Тогда возникает закономерный вопрос а нафиг основные стропы нужны?))) Ты изобрел новый вид спорта. Шнобелевскую в студию!)))
Кататься на оcновных стропах удобнее. Эта система необходима для самоспасения в случаях, когда основная система вышла из строя. Вот тут, кстати, более простой вариант протестировал: ruclips.net/video/Om1r0u6lKMU/видео.html
So Russian, so badass.
Когда нет туриста)
Когда час распутывал планку в воде, пока отбойным течением тебя утаскивало в открытый океан со скоростью 5 км/ч 🤷♂️
@@Prydeclub да видел, жесть конечно
@@x3mall1985 да нее, вообще без жести, обычные маврикийские забавушки
Great way to cut your hands and not even in English. “Everyone should try” “it’s great for anyone”
It's concept of rescue system for using when your regular control system was broken on the water and not possible back to the beach with safety handles by bodydrag (strong current, light wind etc)
English isn't the only language in the world.
RESCUE PIGTAILS SYSTEM - a solution to the problem of self-rescue for kitesurfers in cases where a body drag with a kite in hands by self-rescue handles is ineffective (strong current, big waves, sharp corals, extremely cold water, etc.)
Included:
• 4 lines with loops at the ends, 2 meters long, which can be installed on absolutely any kite between the bridles and pigtails;
• 2 protective tubes 10 cm long (for example, rubber tubes, as on the pumping system between struts and the leading edge, or thermo-plastic tubes, as at the ends of the bar next to the floats), which are installed on the ends of the rear pigtails for protecting the hands in this place;
• Rope 4 mm thick, 5 cm long with loops at the ends, which is put on one of the pigtails with one loop, and the second loop is tightened on the knot of this pigtail.
How it works:
When the control system of the kite fails, we need to completely disconnect all four lines from the kite. Then we attach two front pigtails to the harness hook by a kite leash carabiner. On the next step we connect two rear pigtails to each other by tightening a free loop of 5 cm of the rope onto the knot of free pigtail, which was pre-installed on the other pigtail. We grab the protective tubes on the rear pigtails with our hands to control the kite. We return to the beach, either with a body drag, but with a flying kite, or standing on the board (for advanced riders, as in this video: ruclips.net/video/9VfZ2ObFPlw/видео.html).
P.S. Most likely different kite sizes will require different line lengths. So far I've only tested the system on the 7m kite with 2m lines on it. Must try with other kite sizes. But it would be better if kite manufacturers took care of this issue, and in the future they would release their kites with pigtails so long that they could emergency return to the beach in the manner described above.