I understand a little more about the software. Love it easy to understand. I am a website developer so I am glad this software is friendly and easy use
We've done some crazy projects with trucker hats and 3-d foam, check out our video where we do three layers of 2.5mm foam: ruclips.net/video/5b3cRx7bBZ0/видео.html&t
I understand more about how to get the embroidery to start and stop. I have PE Design 11 software and it is very different. I could not figure out how to make it do the things that I knew I needed to do the 3D puff. I hope to adapt this to my software. I wish my software was as easy to use as this one. Thank you for the tutorial.
Hello and thank you for this awesome video, it really helps. How do we correct the space left on the border of the yellow - it reflects under your finger at the end of video? If that happens again - what do we do to correct? Also, what needle should we use for this type of work? Again, thank you so much!
Hey Willie. Your videos are always so informative. Thanks. What size needle should be used for 3D puff? I'm on a single needle machine. I'm guessing it's 90/14 sharp?
Hi! Do you have this design for free to share so I can try to embroider on a cap? Am waiting for my EM-1010 to arrive and have never embroidered caps before. So excited!! Need to practice on machine first and then Chroma!!
Push and pull is a way of thickening up a piece of artwork and adding overlap where there are split lines to prevent seeing the background or material behind the embroidery. Whatever the direction the stitches are going, if you add to the push/pull it will extend the length of the stitch thus covering the gaps I referred to. You can adjust it in increments of MM, or percentage.
Great video, but the front sides of the hat got squashed in a little bit.(just outside of your stitch. Left of the "t" and right of the "k") how do you prevent that?
Can we please see you work with the TC-1501. It looks like most videos you do are with the MT 1501. I have the TC-1501 and it would be nice to see you using it in some of your videos. Thank you.
Will do! Thanks for the recommendation. for now make sure to check out some of our older videos, we have plenty projects using the TC 1501 ruclips.net/video/6LXViWalsOQ/видео.html&t
hi willie im new to embroidery i bought mt em1010 last year and really havnt used it to much due to not n knowing how to really use it im learning though. what size of foam can i use for a 3D cap? thank u for this videos
hi there, with our embroidery machine, once the design is loaded on the machine it will embroider automatically without stopping unless you add the stops to your design. for more help with 3d puff, you can contact our tech team, ricoma.com/us/tech-support
My husband and I bought a Brother entrepreneur pro px1055. Few months ago and the program we have is mysewnet.we we do not understand how to use it. We would like to do our own designs. We need help. Thank you for your time
Hi there, we typically teach digitizing on our own software chroma, but you can find lots of cross over when it comes to the basics of digitizing. Perhaps our digitizing RUclips channel can help, you can check it out here: ruclips.net/user/ChromaDigitizingSoftwarevideos
Hi there, we are not a digitizing company, but we do have a list of recommended digitizers if you're looking to outsource! email service@ricoma.com and ask for this document and they will send it over!
I have bought ricoma swd machine in india . unfortunately In india they dont give chroma software ,this very sad 😢.but your giving in united states . I have mailed about this please reply
We recommend for you to check out our Ricoma blog which offers a variety of tips, and resources. We have linked it below! blog.ricoma.com/2019/06/06/top-10-wholesalers-for-all-of-your-embroidery-needs/
Hi. I love watching you videos you give great information but I've not got this software or machine. I have a Brother pr 1050x and pe design 11. Do you know anyone like yourself who does theses kind of videos for that machine that I have. Thanks
Not that we are aware of. This is the premiere destination on RUclips for all things custom apparel! A lot of the concepts will apply so you can still have a lot of takeaways
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Hi there, if you wanted some tips/tricks please reach out to the service team so they can walk you through our Chroma software ---> ricoma.com/US/contact-us
Hi there, you can do pretty much anything with Chroma inspire, but the tools used may differ, if you need help with chroma inspire, contact our tech team: ricoma.com/us/tech-support
It is important because the angle lines determined where the stitched are going to be placed. If you have too many of them it can create open spots on your embroidery.
Muy buenas tarde amigo acabo de comprar la máquina Ricoma con el programa para digitalizar pero necesito un conseguir un video donde explique cómo digitalizar pero en español por favor necesito de su ayuda
Hi there! We have this information on our blog, and a RUclips video on this as well. Check out the links below! blog.ricoma.com/2019/03/15/embroidery-stabilizer-guide-tips-on-how-to-choose-the-correct-backing-for-machine-embroidery-2/ ruclips.net/video/iPcJa8LTVDw/видео.html
We have distributors all over the globe! Click here to fill out your information and your local distributor will be in contact with you, ricoma.com/us/contact-us
Hi Edgar! This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
This is literally the only thing i dont like ricoma about. They give entre level software where you cant do simple stuff like convert complex fill to satin stitch. How do i follow tutorial when i dont have all the tools in a expensive machine package.
HI there, thanks so much for watching. Our embroidery machine packages include everything you need to get started. Other embroidery machine manufacturers typically don't include any form of digitizing software. For more complex designs, you will eventually need to upgrade your software to Plus or Luxe. We do offer financing to help with your upgrade. If you're interested in learning more, please click here > shop.ricoma.com/products/chroma?variant=31414905077878
I understand a little more about the software. Love it easy to understand. I am a website developer so I am glad this software is friendly and easy use
Great to hear! Thanks for watching!
Hi! Aren't you suppose to capping the edges to cover the edges and to stop the thread unravelling?
yea I dont think they showed that part trying to make digitizing seem easy
Just as helpful as him not mentioning it.
and he is using chroma luxe so some of this features you won't find on chroma inspire :/
Great video!
Have your ever embroidered 2mm puff on a trucker hat foam panel?
If so, what tips/tricks do you have?!
We've done some crazy projects with trucker hats and 3-d foam, check out our video where we do three layers of 2.5mm foam: ruclips.net/video/5b3cRx7bBZ0/видео.html&t
This was an awesome video. I do not have the Ricoma but your tips and tricks are wonderful. Thank you so much.
We are so glad our tips helped, Amy!
I understand more about how to get the embroidery to start and stop. I have PE Design 11 software and it is very different. I could not figure out how to make it do the things that I knew I needed to do the 3D puff. I hope to adapt this to my software. I wish my software was as easy to use as this one. Thank you for the tutorial.
Thanks for watching, if you're interested in our software, you can click here to learn more: ricoma.com/US/software/chroma
Hello and thank you for this awesome video, it really helps. How do we correct the space left on the border of the yellow - it reflects under your finger at the end of video? If that happens again - what do we do to correct?
Also, what needle should we use for this type of work?
Again, thank you so much!
Hi there, please send our customer service team an email so they can help > service@ricoma.com
Hey Willie. Your videos are always so informative. Thanks. What size needle should be used for 3D puff? I'm on a single needle machine. I'm guessing it's 90/14 sharp?
Hi Regina! You can use 75/11 needles and running their machine at 600
That's awesome video! Did you adjust the height of the needle for 3D portion? Thanks.
Hi Mel! Check out this video in which we show how to do puff embroidery on hats.
ruclips.net/video/SxEuC_23rhw/видео.html
Do you have to cap the ends? I noticed that you didn’t do that. Thanks for a great video.
Hi Lillian, thanks for the suggestion, we will be sure to pass this down!
Hi! Do you have this design for free to share so I can try to embroider on a cap? Am waiting for my EM-1010 to arrive and have never embroidered caps before. So excited!! Need to practice on machine first and then Chroma!!
Hi there! You can actually find some cool designs through Hoopmade ----> hoopmade.com/
Awesome vid! Super helpful. Can you explain a little about push and pull? I get what it’s for but how do you know what to set it at? Thanks!
Sure thing! You can learn more about push and pull in this chroma digitizing video: ruclips.net/video/x0f5cdo3kOg/видео.html
Push and pull is a way of thickening up a piece of artwork and adding overlap where there are split lines to prevent seeing the background or material behind the embroidery. Whatever the direction the stitches are going, if you add to the push/pull it will extend the length of the stitch thus covering the gaps I referred to. You can adjust it in increments of MM, or percentage.
This is fire I can't wait to get approved for financing so I can get this machine
YES! We can't wait for your to get your own Ricoma either!
Great video, but the front sides of the hat got squashed in a little bit.(just outside of your stitch. Left of the "t" and right of the "k") how do you prevent that?
Hi! We recommend speaking with our customer service team so they can give you some tips/tricks to prevent that! ----->service@ricoma.com
Can we please see you work with the TC-1501. It looks like most videos you do are with the MT 1501. I have the TC-1501 and it would be nice to see you using it in some of your videos. Thank you.
Will do! Thanks for the recommendation. for now make sure to check out some of our older videos, we have plenty projects using the TC 1501 ruclips.net/video/6LXViWalsOQ/видео.html&t
hi willie im new to embroidery i bought mt em1010 last year and really havnt used it to much due to not n
knowing how to really use it im learning though. what size of foam can i use for a 3D cap? thank u for this videos
3mm thickness will work great
Goodnight! I am a ricoma customer and I recently acquired a TC 1501 here in Brazil. I would like to know how can I purchase the CHROMA program?
Hi there, and congrats on your new purchase! Please submit a form with the team, so they can get this started for you!--->ricoma.com/US/contact-us
So with this machine you don't need to add cap threads at the ends of each letter to do 3D puff?
hi there, with our embroidery machine, once the design is loaded on the machine it will embroider automatically without stopping unless you add the stops to your design. for more help with 3d puff, you can contact our tech team, ricoma.com/us/tech-support
My husband and I bought a Brother entrepreneur pro px1055. Few months ago and the program we have is mysewnet.we we do not understand how to use it. We would like to do our own designs. We need help. Thank you for your time
Hi there, we typically teach digitizing on our own software chroma, but you can find lots of cross over when it comes to the basics of digitizing. Perhaps our digitizing RUclips channel can help, you can check it out here: ruclips.net/user/ChromaDigitizingSoftwarevideos
Get yourself pe design 10 or 11 it’s not hard to use and learn to use and many tutorials on RUclips for it
Great video! Is that software online base?
Hi! Yes, you need to download it and have a serial number
Sounded like you slowed machine down during foam… What did you do to clean up foam on edges?
Heat gun
Hello great video
Did you change the speed once you put the foam and if, what is the speed you put the machine at thanks have a great day.
No the speed auto adjusts when it’s doing jump stitches for the 3D part
@@ricomatv cool thanks
Can these tips be applied to the 1501 tc machine?
Yes
what hoop choice do you choose for cap "on chroma" for ricoma machine?
Hi there! Please send an email to customer service so they can help! ----> service@ricoma.com
Do you have to put underlay under your puff?
No. When doing puff, the underlay should be removed.
Thanks for the video
what is the diameter of the needle and thread to embroider the satin?
Hopefully this video helps!
ruclips.net/video/0KhEz0BQdns/видео.html
Hi, what is the size of this design? Very helpful video, thank you!
Thanks for watching!
Can you use foam on the sides?
Yes!
Hey Willie, How do you make your source files? I would be cool if you provided a file for use to follow along.
That's a great idea! Thanks for the recommendation
I’m learning a lot from you...Thanks for the tutorial
You are so welcome!
This is a great video!
Glad you enjoyed it!
Why my Ricoma machine brakes the thread frequently if I put the speed more than 300?
That could be so many things: your thread path could be off, tension could be off, needle could be dull/burred, timing could be off etc.
Thank you for this video. Good stuff
Glad you enjoyed it!
Can I digitize using my Photoshop software?
No unfortunately, you need a digitizing software, since the machine is going to need to read the design in stitches.
Hi, i have a Ricoma 1501TC-7S. I'm new to it. Can i send an artwork for it to be digitized for use? Outsource from you
Hi there, we are not a digitizing company, but we do have a list of recommended digitizers if you're looking to outsource! email service@ricoma.com and ask for this document and they will send it over!
Can someone recommend a good embroidery/print/patches company?
We recommend you join one of our community groups where you'll find informative resources: facebook.com/groups/embroiderymastery
@@ricomatv thank you! I will!
@@QueenLolaBouli you're most welcome :)
I have bought ricoma swd machine in india . unfortunately In india they dont give chroma software ,this very sad 😢.but your giving in united states . I have mailed about this please reply
Hi there, this is only for the US, we apologize for the inconvenience.
Where do you order your stitching thread do you have a site where I can order it from
We recommend for you to check out our Ricoma blog which offers a variety of tips, and resources. We have linked it below!
blog.ricoma.com/2019/06/06/top-10-wholesalers-for-all-of-your-embroidery-needs/
What needle is used?
Hi! You can use a standard 75/11 needle!
Hi. I love watching you videos you give great information but I've not got this software or machine. I have a Brother pr 1050x and pe design 11. Do you know anyone like yourself who does theses kind of videos for that machine that I have. Thanks
Not that we are aware of. This is the premiere destination on RUclips for all things custom apparel! A lot of the concepts will apply so you can still have a lot of takeaways
@@ricomatv Thanks for your reply
can you use the digitizing programme on a brother machine? looks like you can't convert it to a .pes file
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Do you sell this embroidery design ?!
Hi there! We don't have this sale design, but we recommend checking out HoopMade for other 3D Puff designs.
hoopmade.com/
How can i download chroma software free trail please ?
please make the detailed video on travelling please
Hi there, if you wanted some tips/tricks please reach out to the service team so they can walk you through our Chroma software ---> ricoma.com/US/contact-us
Can I do it with chroma inspire? There’s some tools like utilities that I didn’t find.
Hi there, you can do pretty much anything with Chroma inspire, but the tools used may differ, if you need help with chroma inspire, contact our tech team: ricoma.com/us/tech-support
Great video thanks for sharing
Thanks for watching!
Willie, how do you get the picture (Think) into the software to begin with?
Hi! You create this design on Chroma, and then send it to your machine!
@@ricomatv but where did "Think " come from? Adobe? Corelli? I want to make a picture of my own and then convert it to an embroidery design.
Corel, sorry.
What’s the purpose of an angle line ?
It is important because the angle lines determined where the stitched are going to be placed. If you have too many of them it can create open spots on your embroidery.
WHAT FONT DO YOU USE?
It's the Zulia Pro Regular by Sudtipos!
actually the font used is Ganache Basic
Very nice work. It‘s perfect 🔥
Thank you! And thanks for watching
What type of caps were used
We used these caps: Richardson 112 Hats
Thank you this was great stuff.
Glad it was helpful!
Muy buenas tarde amigo acabo de comprar la máquina Ricoma con el programa para digitalizar pero necesito un conseguir un video donde explique cómo digitalizar pero en español por favor necesito de su ayuda
¡Hola! ¿Has contactado con nuestro equipo? Puede comunicarse a través de este enlace.
ricoma.com/US/support
what about letters like R that have the little opening?
Hi Miguel! For more tutorials/tips we recommend looking through Chroma's RUclips channel! ----->www.youtube.com/@ChromaDigitizingSoftware
@@ricomatv can you specify a video? it would be of much help
Is there a reason why the K is split like that? Seems kinda weird the l part isn’t continuous.
It's how we designed it to look like handwriting. Thanks for watching
Is the luxe compatible with PES files for brother machines
Chroma allows you to export your design in any format including .PES
Hi sir how to use water soluble paper details information give me
Hi there! We have this information on our blog, and a RUclips video on this as well. Check out the links below!
blog.ricoma.com/2019/03/15/embroidery-stabilizer-guide-tips-on-how-to-choose-the-correct-backing-for-machine-embroidery-2/
ruclips.net/video/iPcJa8LTVDw/видео.html
Please how can install chromeluxe software in my desktop
Hi there, please check out this video Chroma shared on their RUclips channel--->ruclips.net/video/PquBfalQ4UU/видео.html.
Can you perform these same actions on SewArt?
Sorry, we're not familiar with SewArt. We recommend reaching out to the manufacturer.
Amazing ❤❤❤
Thanks for watching!
Do you have a copy of the Think design
Hi there this design should be made available on Hoopmade.com soon! you can also check Hoopmade.com for past embroidery hub designs.
Are tutorials only for luxe
Hi! Please check out the Chroma RUclips channel > www.youtube.com/@ChromaDigitizingSoftware
Lol! Not gonna lie, I sometimes feel like Tony whenever I hear about digitizing.
Trust us everyone starts our the same way. You gotta start somewhere right? Good thing you've got us to help teach you everything you need to know!
Thanks for this video
Most welcome!
I love this video
Thanks so much for watching! We are so happy you enjoyed this video :)
How do you embroidery a large area's with multiple heards
Hi! Are you referring to multiple heads?
Yes please
My software for some can’t add angle lines. Nor does it have the wand option. I have the chroma inspire. Please help
You’ll need higher tiers like Chroma Plus or Chroma Luxe to unlock those features
@@ricomatv that’s probably why. thank you 🙏🏼
do you deliver the machine to Northeast India??
We have distributors all over the globe! Click here to fill out your information and your local distributor will be in contact with you, ricoma.com/us/contact-us
How much can I get this machine
Hi Wesler! We recommend you contacting our sales team since our pricing can vary.
ricoma.com/US/contact-us
Can you do puff on a shirt or beanie?
Yes you can
yes you can!
Where do you get your thread from?
Hi there, thanks so much for watching. We recommend Madeira thread. You can check it out here > www.madeirausa.com/
That is sick
Thanks so much for watching!
price??
To learn about our pricing fill out the information in this form and our product specialists will be in contact with you, Ricoma.com/us/contact-us
Who can do a 3D custom digitizing?
Hi Edgar! This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Man whats the stitch count on that design ?
Unfortunately, we don't recall! But it's awesome right?!
What if the phone keeps sticking out
Hi there, our service team can give you more pointers here: ricoma.com/us/tech-support
What's the name of the software?
Chroma! You can learn more about it here: ricoma.com/US/software/chroma
Are going to share that file?
Hi there, at the moment we do not have this file to share, but you can visit hoopmade.com for lots of our past files!
Don't you have a trace tool? by now 8-1-2022 ?
Hi Jeff. We have a trace tool, and you can find it through our official website ---> shop.ricoma.com/
What’s the width and height on that logo
HI there, thanks so much for watching. Height was 2.5 and width was about 5.0. Hope this helps!
@@ricomatv thank you
MORNING I HAVE MACHINE HELP WITH TRANING PLS
Hi there, please submit a request with the team so they can further help ----> ricoma.com/US/contact-us
🔥🔥🔥
Thanks for watching!
@@ricomatv I need a ricoma channel. Can you help with this?🤔
If I don't know much about computer and I can't digitize do sell embroidery design ready to embroid
Absolutely, there are many resources out there to help you find digitized embroidery designs.
Really detailed explanation! Thanks
Glad it was helpful!
my density only goes as low as 10
Hi! Are you having issues with density?
This is literally the only thing i dont like ricoma about. They give entre level software where you cant do simple stuff like convert complex fill to satin stitch. How do i follow tutorial when i dont have all the tools in a expensive machine package.
HI there, thanks so much for watching. Our embroidery machine packages include everything you need to get started. Other embroidery machine manufacturers typically don't include any form of digitizing software. For more complex designs, you will eventually need to upgrade your software to Plus or Luxe. We do offer financing to help with your upgrade. If you're interested in learning more, please click here > shop.ricoma.com/products/chroma?variant=31414905077878
Need in person training
Hi Austin, we would love to help you out! Please send us an email so we can point you to the right direction ---->service@ricoma.com
Hi! Aren't you suppose to capping the edges to cover the edges and to stop the thread unraveling?
For 3D puff, yes