Basics of 3D Puff embroidery. Talking digitizing and embroidering simple design using Tajima TMBP2

#embroidery #tajima #diy #machineembroidery #howtoembroider
Heyoooo, today we go over a little bit about how to digitize simple designs to embroider 3D puff. Of course, there's a ton of things to go over when digitizing and embroidering puff but today we go as simple as simple as possible.
Products I use for my business
H.B.I. PRODUCTS Cut Away Embroidery Stabilizer 12” x 50 Yd Roll - 2.5 ounce Cutaway for Machine Embroidery
amzn.to/3YhqrEv
Hat cut away
amzn.to/4hjQmV0
Bobbins
amzn.to/40jmOk3
tender touch
amzn.to/3NzKrx4
No show mesh
amzn.to/3C7sweE
75/11 Groz-Beckert needles
amzn.to/4abilTt
towa bobbin tension gauge
amzn.to/409zCIi
sublimation paper
amzn.to/3Yhrbth
Munbyn Printer
amzn.to/3PoOflK
Printer labels
amzn.to/3PHR5CR
Accuteck weight Scale
amzn.to/40nPHLO
With Amazon affiliate links, I earn a small commission and it helps the channel. Thank you for supporting.

[@Samcraftcom]

@6:02 I REALLY appreciate you leaving this part in. :) That hat is crispy for sure, great job! I took notes. :)

[@MikesLife87]

Awesome

[@tkstitch]

Thank you!

[@quickerchick]

very nice. One day I might be up to this level of work.

[@tkstitch]

Thank you! And trust me I’m no pro, there’s a whole stack of items I’ve messed up and practiced on to start getting decent results. Just gotta keep messing up and getting better 💪

[@motorbikeaddict]

Nice job

[@MeFixingEverything]

Very nice ! Thanks

[@tkstitch]

Thank YOU!

[@justma7t93]

Are you better off with Melco or Tajima?

[@tkstitch]

The tajima is better but they’re very different machines and wouldn’t be able to afford a tajima without first getting the Melco. And I still use the Melco just for more simple designs

[@justma7t93]

I use a Chinese car, since these really cost a lot, but with the tensions it drives me crazy :S now I’ve been digitizing for about a year. I thought the melco (it went out there summit) was better than the tajima, since it has the automatic voltage system. Happy Japan also seemed interesting, but the one with digital tensions costs 20k.

[@tkstitch]

@ for me the digital tension on the Melco is a little iffy to be honest but it could also be user error, I felt like I followed the “rules” for setting the automatic tension but never really seemed right. But don’t be put off by my experience if it looks good to you. We were also thinking of a happy Japan but the regular tension knob ones

[@justma7t93]

Anyway, you do very nice things, I follow you from Italy :) do you have an Instagram profile? So I add you?

[@callahanrustics5274]

What was that tweezer thing that you cut the thread with at the end? And where do I purchase that?

[@tkstitch]

We’ve had these for a while I honestly don’t remember where they came from but yea they’re just regular pointy tweezers. Just saw they have similar ones on Amazon

[@OpeyEcom]

What foam are you using?

[@tkstitch]

3mm foam from allstitch.com

[@yogitse3615]

what is your max measure of your satin stitch in the head of the horse?

[@tkstitch]

The widest part is about .80 inches or 20.2mm

[@wusupwitdat]

Where did you get the tape from?

[@tkstitch]

Its called something like "heat tape for sublimation" it's really used for holding down things you're going to heat press but I have a ton so it works for this too.

[@FlatCreekLadiesGolfAssociation]

Is it possible to get the design?

[@diewerbepalette9261]

It’s really nice .. can you send me the dst please 🙏 .. best regards from Germany

[@romesreviews3389]

Nice , reminds me of a Knight from a chessboard ….

[@tkstitch]

Truuueee I did not think abut it like that, I like it!

[@michaeltlays1293]

😂😂even i forgot about the Foam 😂😂😂