Looking at the Erbauer Router
HTML-код
- Опубликовано: 10 фев 2019
- Here we take a comprehensive look at the Erbauer router and all it's features.
RECOMMENDED
Bosch 1/4" router bit set: amzn.to/2Qn1mZ1
Trend 1/2" router bit set: amzn.to/2AC4xBr
Subscribe to see all my videos and be sure not to miss a thing!
Below are links to other Erbauer tool reviews...…
---ERBAUER CORDLESS DRILL REVIEW---
• Video
---ERBAUER 710W JIGSAW REVIEW---
• Video
---DON'T WANT TO MISS A THING?... SUBCRIBE FOR MORE TOOL AND PRODUCT REVIEW VIDEOS---
/ @jbtv
Check out my Facebook page: / justinbailly 
Видеоклипы
Thanks for the video Justin. Was clueless opening the box up until I watched your video. Probably saved me a trip to A and E too.
many thanks very clear and straight forward. I will be buying one n this basis and appreciate the time and clarity of all the items provided. I thought you presented this very well!
Super helpful. Thanks. I now know how to use my router as the manual was just hard work.
Just remembered this video after a friend purcased a trend t7 and wanted my advice on how to mount it in his table. Routers do spin fast like a jet engine. 28,000 revs per min. That's 466 revs per second!
Great explanation, made some of the non obvious bits obvious. Thanks
Got one of these today to attempt a butt and scribe joint. Great vid👍🏻
Merci pour ces explications ! Je viens d' en acheter une identique aujourd' hui. Je me base à la vidéo plus qu' à votre explication ( en anglais, je ne maîtrise pas la langue à fond) et j' ai appris plus de chose sur cette machine qu' en essayant de lire la notice traduite en "français" ! Merci !
Big thank you just purchased this model never used one in my life great instruction looking forward to using mine soon will be looking back on this page being careful safety-wise.
Thanks for showing us everything that came in the case, I just bought one from screwfix, cost me a oner
Now all you gotta do is show us you using it on various materials
I’m trying to cut a hole for a sink in a laminate work top for an underslung sink
I have never used a router before
Great, no problem. My next video is actually a bit of a blog; but using the router, look out for that. This week I'm fitting a kitchen and will be using it and filming it, so plenty to see from the erbauer router soon 👍
Hi, Justin, thanks for the useful video. As I am not very experienced, could you tell me how to cut grooves ACROSS a plank (90 degrees to the edge). I can't work out how to do this. Thanks if you had the time to reply. Philip
very clear instructions well presented, i want to thank you for the quick reply to my comment. the router type is ER2100, code 535FX, catalog page 972. the collets for 8mm bits don't close anywhere near enough to hold 8mm router bits. The day after i realised their seemed to be a fault i returned to the store, the assistant tried his best. He brought out another one and between us both we couldn't get 8mm bit to fit. I wanted to know if the one you show has the same fault. That way i would know its probably a defect batch, and if that was the case i would exchange it rather than return it, thanks ,Paul.
So I've heard that it's impossible to get new motor brushes or spare collets, is this correct? Also, what options are there to add this to a cheap table?
after some searching i have realised the problem, the shank on my router bits is metric, so bang on 8mm. 3/8'' is around 9.5, oh dear. i must thank you for your quick response.
No worries, good you got it sorted 👍
Just bought one on the basis of this #99 good value.
Excellent!! Enjoy 👍
Can't see it lasting as long as my elu mof177 that's still going strong 25 years later,yep I'm old school lol. They are fine for odd jobs but the build is poor but that reflects in its price I guess.
Can anyone answer this question.. I have seen a lot of centring tools for routers will i need to centre this router before cutting kitchen worktops with a jig.. Thanks
Hi fitted router to router table how do you hold it on to run work through that's
Thanks. BTW 'guard' = 'guide'?
What's it like for kitchen worktops?
It's ok, used it a few times for that. Would buy something more robust if I was doing worktops every day.
How’s it holding up?
This is pretty much the same as the Trend T7EK which is a rebadged generic design that has ben copied by lots resellers. Even the accessories are identical so there is nothing to choose between them other than the best price.
Yes, my colleague bought the Trend one a few weeks ago, it all looks exactly the same!
Is it possible to convert this ER2100 Erbauer Plunge Router into becoming a Table Router?
Sorry, I'm unable to answer that.
hi can you show how to fit the 8mm router collet with the 8mm router bit in operation please, as the one i purchased 6/1/2020 won't do that, nor do the ones in stock , screw fix wigan. can you help.
I'll do it this weekend for you 👍
You didn’t do anything
Stop pretending to be a TV presenter.
I've bought one of these Routers today and this is one of the few video's available, so I appreciate any comments on the unit. As for your comment, isn't constructive criticism and education is better than simply tearing someone apart for their effort?
@denmik1963 what's Minecraft?
Come back when you’ve got more than 16 subscribers.
@@-_AjB_- you are an utter bell end at life....simple.
@@OiOiGeordieLEW fuck off