@@PatternStudio101 Hey Jin.... I saw your one video (Master class) I learn something new about base line & pant balanace which is very helpfull for me. Is there is any other master class plz give me link. I also get a mail about' Mastering pattern block ' but there is no link. You talking about online course is that a paid course????
@newazsharif6812 Hi, [Mastering Pattern Blocks] is a paid online course that I teach you pattern block makings, fitting, and pattern adjustments. If you join the course, there are masterclasses as bonus!!
@newazsharif6812 My online courses are all recorded lessons, so you can take it at your own pace. Here the details about Mastering Pattern Blocks. www.patternstudio101.com/mpb
Hi. Thank you. Probably the best Tutorial. At minute 2:58 you mentioned the Extension minus "1/2 of an inch". What does that mean? If the extension is 3/4 of an inch (in this case 1 1/2" overla[p), should the line be extended 3/4 - 1/2 = 1/4 of an inch only? I am only a bit confused on the "minus 1/2"" part.
Hi. What I cant find anywhere..what if we dont want a collar stand width same all the way? Like, if we want it wider at the back center, narower at front..do we do it on upper or lower line? I do not want to change the width of the collar. Thank you.
It doesn’t matter. You can add and reduce the width you want. If your bottom angle is more curved, the collar stand will sit more flat on your front neck.
Hi shulin, in the beginning (at 0:55) I explained it. When you make the front pattern, you add 3/8" or 1/2" at the center front for the button closure. That's the extension. If you added 3/8" on the front, you add 3/8" at the collar stand. Make sense?
If the “extension” refer to the overlap piece of fabric on the front center of a shirt where we add buttons, it is usually approx. 1” width. When we drape the collar pattern, it is half neckline circumference. My question is -- is it supposed to be back + front + 1/2 of extension? Thank you.
@@shulinmueller4851 if you say 1" width overlap, the extension is 1/2". You add 1/2" at the center front. 1/2" at right side, 1/2" at left side, so you will have 1" width overlap. But often times, extention is 3/8", so 3/4" overlap. When you measure the neck, measure the front neck up to the center front, and measure the extension separately. If you’re not clear at any point, please let me know 😀
شكرا لك على مشاهدة أشرطة الفيديو الخاصة بي. أنا أعمل على الترجمة الآن. لذلك سوف تحصل على تسمية توضيحية باللغة العربية على جميع مقاطع الفيديو الخاصة بي في شهر واحد.
![How To Make Men’s Dress Shirt Pattern_Body [Pattern Making Tutorial]](http://i.ytimg.com/vi/vd2YimhQOSM/mqdefault.jpg)
![How To Make Men’s Dress Shirt Pattern_Body [Pattern Making Tutorial]](/img/tr.png)
This is by far the best tutorial on collar stands and collars. Super easy and well explained. Thank you so much!!
Thank you for your kind words. It means a lot to me!!
just followed this thank you so much. I had no idea where to start :)
I’m glad that my video can guide you. Thank you!
Hi, love the way you teach. very simple and no clutter!
Thank you so much for your compliments ☺
You are just such a perfect teacher
You made my day! Thanks 😊
Thank you for such thorough and beautiful explanation.
You're welcome 😊
Great work keep it up..
Hi miss ..thank you so much your Chanel best ❤❤❤❤❤
@@LiyanageThushari Thank you 😊
You are best teacher ❤❤❤❤❤❤
I am from sri lanka
@@LiyanageThushari Thank you for being in my community 😊
Lovingggggg your videos❤️❤️❤️ so helpful and professional!
Thank you so much Nora 💓
Nice and very clear explanation thank you
You're welcome!
You make pattern so simple
Pattern making should be simple!!
Very helpfull..thank you very much teacher jen..for lesson and the knowledge
My pleasure 😊
Thank you for this tutorial! It was so clear and easy to follow :) I'll have to check out your other drafting tutorials
I'm happy that you found me. Enjoy my videos!
🙏🙏🙏🙏🙏🙏🙏Thank you so much mem ,very nice useful information about collar.
You're welcome 😊
Wow you're an angel
Oh thank you 😊😊
Love this video!!
Thank you so much Anna!
i love this video very clear, definetelt subscribing to your channel.
Welcome 😀
Thank you mis 🖤
You’re welcome 😁
Very helpful 😅😅❤️
Thank you 😊
Best so far, thanks
Thank you 😊
@@PatternStudio101 you are welcome, it made it easier
Wow thank you am going to do this for a shirt am presently making.
Let me know how it goes.
Thank you so much it came out better than my method and my collar look more professional. I would consider joining the monthly membership for $9.99
@@nataliestewart7695 Thank you for sharing your story. I’m happy that the collar looks more professional 😁
Its Such a wonderful channel, lots of things to know.... ❤ from 🇧🇩
Thank you. Enjoy!!
@@PatternStudio101 Hey Jin.... I saw your one video (Master class) I learn something new about base line & pant balanace which is very helpfull for me. Is there is any other master class plz give me link.
I also get a mail about' Mastering pattern block ' but there is no link.
You talking about online course is that a paid course????
@newazsharif6812 Hi, [Mastering Pattern Blocks] is a paid online course that I teach you pattern block makings, fitting, and pattern adjustments. If you join the course, there are masterclasses as bonus!!
@@PatternStudio101 Well.. Can u tell me about course fee..... Can i get recorded video of online clasees or have to join live??
@newazsharif6812 My online courses are all recorded lessons, so you can take it at your own pace. Here the details about Mastering Pattern Blocks.
www.patternstudio101.com/mpb
Hi. Thank you. Probably the best Tutorial. At minute 2:58 you mentioned the Extension minus "1/2 of an inch". What does that mean? If the extension is 3/4 of an inch (in this case 1 1/2" overla[p), should the line be extended 3/4 - 1/2 = 1/4 of an inch only? I am only a bit confused on the "minus 1/2"" part.
Hi, I didn't say minus 1/2" 🙂 I said mine is 1/2". Just an example.
@PatternStudio101 awww thank you. Sorry my bad.
Hi. What I cant find anywhere..what if we dont want a collar stand width same all the way? Like, if we want it wider at the back center, narower at front..do we do it on upper or lower line? I do not want to change the width of the collar.
Thank you.
It doesn’t matter. You can add and reduce the width you want. If your bottom angle is more curved, the collar stand will sit more flat on your front neck.
Can you trace these drafted pieces to show what your finished pattern pieces look like?? That would be really helpful
Great idea!! I'll make videos for that. Thank you 😊
My life saviour ❤️❤️❤️
Thankyou so much
My pleasure 😊
Very nice video
Thank you 😊
Which design software would you recommend to draft patterns please? Thanks.
The one I'm using is PAD system. It is user friendly and easy to access.
Thanks.
You're welcome
Please define "extension". How do you measure the Extension?
Hi shulin, in the beginning (at 0:55) I explained it. When you make the front pattern, you add 3/8" or 1/2" at the center front for the button closure. That's the extension. If you added 3/8" on the front, you add 3/8" at the collar stand. Make sense?
If the “extension” refer to the overlap piece of fabric on the front center of a shirt where we add buttons, it is usually approx. 1” width. When we drape the collar pattern, it is half neckline circumference. My question is -- is it supposed to be back + front + 1/2 of extension?
Thank you.
@@shulinmueller4851 if you say 1" width overlap, the extension is 1/2". You add 1/2" at the center front. 1/2" at right side, 1/2" at left side, so you will have 1" width overlap. But often times, extention is 3/8", so 3/4" overlap. When you measure the neck, measure the front neck up to the center front, and measure the extension separately. If you’re not clear at any point, please let me know 😀
@@PatternStudio101 Thank you very much for clarification.
👌❤️
❤❤❤
Please do video on Mandarin collar
I think I have one… but I’m not sure. Yes, I’ll make one.😊
How do you get high shoulder point?
@@JoanAnigbata You measure the back neck length from the back body.
@@PatternStudio101 thank you 😊
Hello, I would like to know which pattern making software you are using on this video please? Much appreciated, thanks in advance.🙏☺
This si PAD system. Thank you.
@@PatternStudio101 Thank you🙏
Hi, can you please update the caption? It's not showing up.
I fixed it. It should work now.
Thanks
Thanks for watching 😊
what is a center back?
Thank you. The tutorial is very helpful.
My pleasure 😃
السلام عليكم نريد ترجمة الى اللغة العربية لكل الفيديوهات لان الفيديوهات مفيدة وجيدة
شكرا لك على مشاهدة أشرطة الفيديو الخاصة بي. أنا أعمل على الترجمة الآن. لذلك سوف تحصل على تسمية توضيحية باللغة العربية على جميع مقاطع الفيديو الخاصة بي في شهر واحد.
thanks you please gave me your gmail
support @patternstudio101. Com
Thank you you 😊😊
You're welcome 😊