Really great video.. Do you charge the throttle channel to reversed when using Castle Creations xlx2, like on Radiolink and futaba And what receiver will i get the longest range with 😊
Hello, you make great Videos. I allready bought a NB4+ and configured it with your support. But, i have a big problem. I bought an FS-CGPS-01 GPS module. It is an iBus device. I am not able to get it work. I do not see adittional senors. The temperatrure and voltage sensor works fine. May you are able to test/show it. cheers Thilo
The one you have is ibus you need ibus 2 for GPS on nb4/nb4+ and pro but not sure if you can mix ibus with ibus 2 sensors so you may need all ibus 2 and they do temp and voltage ibus 2
I’m having issues with not being able to power off the vehicle without turning off the remote and sometimes I even have to unplug the battery to shut off the car. I’m running an xr10 pro hobbywing. Any idea what may cause that?
There definitely something set up wrong, if you try to power off the transmitter 1st you should get a warning saying power off receiver 1st, but there's is nothing that the transmitter or receiver does that would be able to stop you powering off the RC/esc so I'd check the firmware on the esc and check the wiring make.sure you don't have any cut cables or anything
Hi, my NB4+ was in Chinese when I powered up. I can’t seem to find a way to change the language to English. Can you help see which options on your screen allows me to switch language. 🙏
Craig, I’m glad FlySky has finally spilled the beans about the Noble Pro+. Took them a while but we all had a feeling it was going to happen.
Yep can't wait to get my hands on one :)
Really great video..
Do you charge the throttle channel to reversed when using Castle Creations xlx2, like on Radiolink and futaba
And what receiver will i get the longest range with 😊
Depends on how you have the esc set up really as for range fgr4d or one of the tfr receivers will give longest range
Hello, you make great Videos. I allready bought a NB4+ and configured it with your support. But, i have a big problem. I bought an FS-CGPS-01 GPS module. It is an iBus device. I am not able to get it work. I do not see adittional senors. The temperatrure and voltage sensor works fine. May you are able to test/show it.
cheers
Thilo
That's the wrong GPS for nb4, nb4+ and pro you need this one www.flysky-cn.com/fsibg01specifications
@@WTFRCCars But, this is a ibus2 device. My temp and voltage sensors are ibus. Is it possible to use it in parallel on one reciever ?
The one you have is ibus you need ibus 2 for GPS on nb4/nb4+ and pro but not sure if you can mix ibus with ibus 2 sensors so you may need all ibus 2 and they do temp and voltage ibus 2
In servo frequency what im ganna put in a throttle? My car is electric not a nitro
Depends on what esc you have, most esc's can run at 333hz but more expensive esc's can run higher frequency
I’m having issues with not being able to power off the vehicle without turning off the remote and sometimes I even have to unplug the battery to shut off the car. I’m running an xr10 pro hobbywing. Any idea what may cause that?
There definitely something set up wrong, if you try to power off the transmitter 1st you should get a warning saying power off receiver 1st, but there's is nothing that the transmitter or receiver does that would be able to stop you powering off the RC/esc so I'd check the firmware on the esc and check the wiring make.sure you don't have any cut cables or anything
@@WTFRCCars okay sounds good. I’ll check it out and let you know. Thank you!
@@WTFRCCars I had to go into my esc and change the controller off parameter to get it to turn off without remote having to be turned off 😎 thank you!!
@reesewagster2634 the one where you hold brake to power off ?
Hi, my NB4+ was in Chinese when I powered up. I can’t seem to find a way to change the language to English.
Can you help see which options on your screen allows me to switch language. 🙏
As far as I'm aware you can't change language if it the Chinese version
Oh gosh.
@shaunwee7658 flysky do warn with the pro and nb4+ that they are region locked so buy the correct version there are EU EN and CN version