Installing and Adjusting G-Body Doors
HTML-код
- Опубликовано: 13 июн 2023
- Installing and adjusting door hinges for a seamless and damage-free install.
Links to hinges: Door Hinges For 1978-1988 G-body Malibu El Camino Monte Carlo Cutlas Buick Regal a.co/d/cz2gVq9 
Авто/Мото
Appreciate the tips an tricks needed this motivation time to see what i can do 😂😂 keep it coming man watching an learning 👀🍿💪
You have no idea of the amount of time you've just saved me from wasting. GREAT explanation!
That’s why I do it! Appreciate you watching
6:15 Use the door striker & latch to inform your adjustment. If the door drags onto the striker to latch shut, then you need more adjustment! Only move the striker as a last resort, especially if the door latched shut fine before you started messing with it!
Almost ready for Carlisle 😎🙌🏾
Getting down to the wire bro 😎
7:06 If you trust the body lines on your car, use them to help guide your alignment. It’s a great cheat code!
5:30 You can adjust this condition by jacking up on the tail end of the door once the body side hinge bolts are loosened to 1/2 turn past snug
Skip to 4:15 for door adjustment tips! The correct way is to install doors before your front fenders but this is an easy way not to. Remember to loosen the bolts a 1/2 turn past snug and adjust as needed.
👍
Goodlookn brodie🤜🏿🤛🏿
Thanks bro, hope it helps!
So you didn’t have to take the fender off to install with springs on the hinges
No, I didn’t. Just protect those edges from chipping the paint
in process of working on my 83 t type and my doors latch with like about 3/4" to 1" stick out. i ordered the hinges and want to know can doors come off without removing fender? Is it recommended to remove given the age of car?
Hey, that sounds like you need to adjust the latch striker inward. I think it’s a T50 or so. You can remove the doors without removing the fenders but mask off your door and fender edges to prevent against rubbing when you install the new hinges. It’s tricky, but can be done single-handedly with a jack. Age of the car has no factor
@@CRASHBERN imma send pic on the gram. Looks like the pin that hold the roller is broke.
got new hinges on, now having issues getting door back in position.
Thanks for this video I'm about to start my rebuild of my 86 and why I could contact you if I have questions with maybe and Facebook Instagram or email
Yeah IG is the best way to reach me crashnbern_