You could maybe try to put this v12 mid engined in the covet to make it better (or worse ?) Anyways, great project and off the charts, that's what we like. Love your videos
A very interesting thought I had for a mod would be a turbine engine, like the Chrysler Turbine engine, that drives the wheels almost directly, but like through a clutch or torque converter code module that doesn't heat up when slipping, and throttle mainly controls the amount of grip it exerts. There could be one for the cars and the H-series and one bigger one for the T-series only, that way we could enjoy proper jet cars instead of glorified rocket sleds. Like the Bluebuck Gas Turbine mod and the Jetside Special mod try to do, but properly, so long as BeamNG's code can actually simulate it.
I find it funny that the Covet has been a test subject for a few of your ideas. If you decide to remaster some of your older stuff it'd be fun to put them all together and make "the ultimate Covet" lol
You have all of the weight on the front wheels which means you have zero grip in the rear. It won’t oversteer when you brake well either because the center of gravity is so far forward. Also the v12 is naturally balanced because it’s two straight sixes next to each other
unfortunately beamng doesn't support 2 transmissions, and you can't have 2 engines go into a single transmission either... long story short, it just doesn't work without some kind of modding that I don't know how to do
I can totally tune this and make it absolutely mint if you put in some sort of rwd race suspension for the coilovers on the front and rear of this car also if you made it awd that would help but not 100% necessary other than that itd be cool if you do a modded body where the front core support for the radiator is cut and has like mounts for the v12 to make it look nicer and more realistic i guess also maybe too you could do like a cut interior and make the transmission bigger so it like pokes through a bit or something idk add heavier duty engine mounts add a turbo or turbo(s) make the intercooler and radiator setup rear mounted crazy aero this could be a sick mod dude lol your video has just given me several ideas
Hey fillman, I’m making a replica of a Yamaha Blaster on Automation and I was wondering how to upload it on the beamng mod page for other people to download it
@@fillman86 Hey fill, I finished the blaster replica but when I exported it into beamng it acted like it was made out of jello. No joke it just jiggles and the engine revs super slow and just blows up. Please help🙏
@@tht1dirtbikekid automation is designed to work with normal cars, not open wheeler type things. 1 trick is to put a 3D cube around the whole vehicle (including the tyres), making sure to have 50cm of overhang of the front and rear. Then paint said cube in a custom glass that is fully transparent. Then when exporting, make sure "expand body bounds" is selected this is not a perfect fix, but it'll help. You can also use my rigidification mod that's on the repository
@@fillman86i just wanne tell your really amazing and dont stop lol that game needs people like you it is amazing where you are able to understand that coding of the game and make it to a preference that everyone likes
it funny, cus the Germans did this, and than there were the Czechs who did the exact opposite and sawed a engine in half to get a smaller one, cus everything the Germans make, we must make the opposite
"do you think i deserve 100k?" proceeds to spend painstaking hours creating a car for our entertainment :P
haha
:) ):
Worth it in my opinion!
(Subbed in two different accounts)
He deserves 100,000,000 subs
@@RailsofForney haha let's not go down that rout, because more subs but not more views kind of defeats the purpose lol
What more do I want on a friday? Fillman & V12... Absolutely perfect!
*pop* nice
Tip: use the RWD Covet and put the V12 in the back! There you have more space and at the same time you have a supercar -ish hatchback!
haha it doesn't fit there either :P
@@fillman86 then its a certified behemoth xD anyways Nice Work Man!
GT1 covet
@@fillman86 simple - pop the hatch and let it hang out the back
@@Incommensurabilities haha that comes with its own issues ruclips.net/video/3mSCc-x0KLw/видео.htmlsi=6bD6OIYYDHlkwpvP
You could maybe try to put this v12 mid engined in the covet to make it better (or worse ?)
Anyways, great project and off the charts, that's what we like. Love your videos
I could, but this thumbnail is better :P
@@fillman86 ye, you got a point
7:05
WTF THOSE PULLEYS THO 😂😂😂
life is hard some times :P
That thing does indeed handle like a skateboard with a Briggs and Stratton strapped to it.
I'm not a musically inclined person, so I don't think I get the joke
V12 covet... shits gonna be the LITERAL one of a kind..
Broooooooo I am dumb
the first covet GT
@@fillman86 I mean, I guess it's an Ibishu Cossima V12, because the engine was from a pessima lmao
Boutta make the V24 mod
14th
im gonna touch u 24 times
A very interesting thought I had for a mod would be a turbine engine, like the Chrysler Turbine engine, that drives the wheels almost directly, but like through a clutch or torque converter code module that doesn't heat up when slipping, and throttle mainly controls the amount of grip it exerts. There could be one for the cars and the H-series and one bigger one for the T-series only, that way we could enjoy proper jet cars instead of glorified rocket sleds. Like the Bluebuck Gas Turbine mod and the Jetside Special mod try to do, but properly, so long as BeamNG's code can actually simulate it.
Yooo A New Upload!! What More Do i want on friday? Fillman with a V12 On a Covet!
I aim to please
Me watching you keep both oil fill caps on the valve covers the first time around. 👁👄👁
if some is good, then more is better?
I just finished fixing my truck, and I get rewarded with a Fill video on a Friday. Today's a good day.
I aim to please
Typical Aussie burnout car
lol so you've seen the mini :P
You definitely deserve 100k and many more fill, you do great work!
Thanks, I just have to keep chugging along
I've known about these secret sounds for a good while now thanks to RK's customizable engines mod.
cool, now more people do too :P
So there’s a V12 mod for the Scintilla I downloaded. It’s absolutely amazing, but no 3D model, just the V10 flexbody.
oh, sounds about right haha. I think if you made it a very small engine, you could totally fit a proper v12 flexbody in there
You could have just slapped the V12 into the mid engine rally covet...
because it wouldn't fit there either lol
I find it funny that the Covet has been a test subject for a few of your ideas. If you decide to remaster some of your older stuff it'd be fun to put them all together and make "the ultimate Covet" lol
Its gonna take a while to get to 100K 42.5K/100K yes you deserve it
man I wish I didn't have to wait haha
Could you make this for the "old" gen pessima? the shiluette bodykit would probably be the perfect Combination with the V12😂
I don’t mind if you do, but unfortunately I don’t think it’ll fit there either haha
The good old double V6 and the hot glue gun :D Engeniering easy a boiling water
totes
@@fillman86 the only other thing missing is a fiberglas like body holding together by zipties, love and the hope of macking it home
@@hardi5164 HAHA perfect
I dare you to mount this V12 to the roof of the covet.
ON THE OUTSIDE.
You 100% deserve 100k subscribers
I wish
@@fillman86 in The Future In the future... I mean Ur Close To 50k Subs!
I legit did this on the etk 800 a few months ago and it worked beautifully
yeah I put an automation v12 in it ages ago.... it just seems like that kind of car
@@fillman86 so true, you can take any piece from this car and adapt it so easily, i did 2 inline 6 next to each other offset by 60 degrees
@@eeagle69 each should have been 30 degrees to total 60 (I'm assuming that's what you did, but thought to double check)
That's how Ford make V12
it's why companies switched to modular engines
Maybe the sound files have something to do with automation?
yeah, but automation always exports its own sounds
You have all of the weight on the front wheels which means you have zero grip in the rear. It won’t oversteer when you brake well either because the center of gravity is so far forward. Also the v12 is naturally balanced because it’s two straight sixes next to each other
This engine is crying for AWD imo...
haha AWD can't overcome the engine being counterleavering over the front axle like that XD
though it could mitigate the traction issue haha
@@fillman86That's what I meant, yes :))
As for the engine placement, I guess cut and extrude could be a solution, so we get Covet Type E ((:
you shoulda put it in the bolide because it looks like something that would be in the bolide
true, but it also doesn't fit there either
@@fillman86 really, dang, guess its time for either T-Series or a mid engine H-Series lol
this is stupid and I love it
I have only ONE question:
Why didn't you do this to the mid engine version of the covet instead of the base model?
because it doesn't fit there either :P so it's just a GT car haha
@@fillman86 well if it fits in neither i'd rather have it on the sportier one :/. Maybe it's just me being a picky bastard
i had a stupid idea that a awd covet that has two v6 but the first one is in the front and the second is at the back
This sounds like it could absolutely obliterate Pikes Peak
@@felipeferreira00 so true
unfortunately beamng doesn't support 2 transmissions, and you can't have 2 engines go into a single transmission either... long story short, it just doesn't work without some kind of modding that I don't know how to do
U deserve more than 100,000 mate
well it may happen one day
the v-12 may have been an scrapped engine for the Civetta Scintilla (or whatever its called)
welding ur v6 to another v6 is what russians do
based
I think i'm gonna have to put this in the D-Series. Because LM002 things. Sadly we don't have an SUV similar to it.. Or a mod for it.
another great vid!
Glad you enjoyed!
You have to make a version with this engine in the back 😂
V12 pigeon
considered it, but it'd fit even less
Another video yay🎉
enjoy :)
I can totally tune this and make it absolutely mint if you put in some sort of rwd race suspension for the coilovers on the front and rear of this car
also if you made it awd that would help but not 100% necessary
other than that itd be cool if you do a modded body where the front core support for the radiator is cut and has like mounts for the v12 to make it look nicer and more realistic i guess also maybe too you could do like a cut interior and make the transmission bigger so it like pokes through a bit or something idk
add heavier duty engine mounts
add a turbo or turbo(s)
make the intercooler and radiator setup rear mounted
crazy aero
this could be a sick mod dude lol your video has just given me several ideas
Aussie burnout competition prep be like
Hey fillman, I’m making a replica of a Yamaha Blaster on Automation and I was wondering how to upload it on the beamng mod page for other people to download it
they have instructions you can look up, it'd be too complicated for a youtube comment
@@fillman86 Ok, thanks
@@fillman86 Hey fill, I finished the blaster replica but when I exported it into beamng it acted like it was made out of jello. No joke it just jiggles and the engine revs super slow and just blows up. Please help🙏
@@tht1dirtbikekid automation is designed to work with normal cars, not open wheeler type things. 1 trick is to put a 3D cube around the whole vehicle (including the tyres), making sure to have 50cm of overhang of the front and rear. Then paint said cube in a custom glass that is fully transparent. Then when exporting, make sure "expand body bounds" is selected
this is not a perfect fix, but it'll help. You can also use my rigidification mod that's on the repository
What an awesome video 🤘 Banger
Youve piqued my interest, stranger
well I hope you enjoyed :)
Can I edit this mod when it’s on the repo to make it more realistic so the engine fits etc
I allow people to do what ever they want with my mods, so go for it :) I'd like credit in your mod, but that's not required
@@fillman86 yea i would credit you anyways, i always credit people that either make a mod or help me with a mod
I like that the engine looks like is has another timing chain in the middle of the engine.
casting remanence of it being half as long ;)
Could you make a 200bx front end swap mod somehow? Just to add more to the car
I would like to see a Covette with a truck engine someday ()

you need to make it awd
Unfortunately that still won’t solve the issue of that engine being counter levered over the front axle (not to mention it also wouldn’t fit)
@@fillman86 put it on the rear
v12 covet in the making uwu OWO
Would this fit in my Clio?
probably as good as it does in this covet haha
mabey do V8 +V8
Coming soon
I am ready
5:00 stop giving engineers ideas...
lol
do you have a wheel?? as in the wheel for the game or a controller??
haha I just made a video about that a few days ago
@@fillman86i just wanne tell your really amazing and dont stop lol that game needs people like you it is amazing where you are able to understand that coding of the game and make it to a preference that everyone likes
Before tseries remaster, i made v12 diesel truck
high
hi
@@fillman86 how aer yuo?
Oh wow
it funny, cus the Germans did this, and than there were the Czechs who did the exact opposite and sawed a engine in half to get a smaller one, cus everything the Germans make, we must make the opposite
well the americans took 2 cylinders off of a v8 to make the first v6 ever
it is automation related
yeah, but automation doesn't use it either, so I feel that there's some kind of plans
so when you import a automation V12 what does it use?@@fillman86
i think the v12 and v16 sounds are fror the atomation mods
hello there!
okay obi wan kenobi :P
V12 in beaming.drive💀💀
I am dying fillman because my fyp is cringe💀💀😵
you just created the v12 from an aston martin cause that engine was made by 2 duratec v6's
yeah, that was the premise of the build :)
you forgot the other oil cap
I think I removed it for the final mod... is that what you mean?
i had exacly the same mod but in 200BX somehow long time ago🤔
cool video! can you make 6 bruckell moonhawk race engines for gavril t series? Thanks! (you deserve 1mil subs)
You should throw this engine in the bromide! (Or burnside i cant remember the name)
Credit where credit is due in regards to your hard work.
The V12 sound is still abysmal.
haha tbh I'm not a huge fan of the sound irl outside of race cars
its crazy how low of a follower base you have for what you do
my only solace is that I'm not overrated
🤟
But... you completely skipped the fact that there are V16 sound files....
you should probably check out my latest video
W12?
Put a v16 on a miramar.
Coveted
don't covet thy neighbour's v12
Thats not a V6 can its an I6 car
Are you a real automaker?
haha totes, because we all know beamng = real life
Get rid of the mid engine cam gear bumps. Looks dumb
yep, did that
DOHC
Yep
Though it can be called quad cam too
i need a password to access this files
well you don't need to access the files, just the blend file's name
but i want to know how they made the compression brake on the t series
Second
yep :)
First
noice!
@@fillman86 did I get first?
@@Banjogiga yep
1d ago
the love between filman and V12 is just 🤌🤌
somebody ate my spagett?