Have made my own simple edits with uncapped boost and reasonable "modified" engine internals, runs pretty well. I dont recall the times but think it made around the same torque and hp.
filman is always like lets do something horrible, then fks himself up, then try to fix up everything and fks up more and somehow it is just solved and filman is like *tada* the mod is ready😂😂😂😂
you want to shift after the peak though, otherwise all you're getting is a worse gear ratio, and starting before power starts. The problem here was beamng weird control back end that I didn't understand
Fill, You need to increase the torque converter diameter. You are blowing thru it with all the torque and increasing the stiffness only goes so far. That value is more for fine tuning. Turn the 0.5 value into a variable and set the initial value to something like 0.65 or 0.7
I never really considered seeing a semi truck be given the drag treatment until now. This one looks awesome though I think it needs some more stronger front wheel (practical for drag racing of course) 🤔
In the transmission file, the “gearchangedelay” indicates the number of seconds delay minimum between gear shifts for automatic transmissions, so make it short enough that it changes when you want, but not too short where it shifts up and down too much
@@fillman86 Mods are called: 1:Big rig Upgrade 2:T series drive train expansion pack 3:Bella Semi pack Btw Love You're Video's and Good luck for future Lets Go 100k❤
Also for the torque converter, the only value really needed to be changed is the diameter, a larger diameter results in the engine speed being closer to wheel speed
@fillman86 its what bricks are made for! Gotta get my packages on time lol. Also this thing has so much torque it could probably be the starter motor for a cruiseship engine😂
@fillman86, great video, but you want the torque converter to stall at a lower rpm so you need to increase the diameter. The value 0.5 should be increased to like 0.7 or thereabouts. Better yet would be to make it a variable you can tune
at 23:00 ish second gear isnt too short, its the torque converter that is set to lock up at im assuming 3rd gear... if you notice your gaining speed in second while your rpm is staying the same so its just slipping, also when you change to 3rd instantly it pushes you back to second because your not going fast enough for 3rd
Can you use jet liner wheels? That’s what some pulling teams use. They also build a sleigh underneath the frame so it gets over the watch a bit easier if it digs in
thanks man, I'm glad you have someone who is on the same wavelength as you, that's not easy to find :) it seems a lot of you brits like my stuff, it's appreciated
lol don't do campaign, and just have fun before you bother learning how the handling graphs work also don't start with turbos or nitromethane, they're hard mode lol
It looks like to me in first and second gear your torque converter slips too much and doesn't lock up until third. Make it lock up sooner you definitely have the power to pull thru it without bogging down the engine. And if it does just add more power.
One question: why not dual axles for extra rear drag wheels and tires? And all are connected to the engine. Asif. you just took a stock dual axle truck, gave it a drag engine and some bigndrag slicks and nothing else.
@@fillman86 give it more boost than lol. And remove any unnecessary weight. And also make the frame out of fiberglass to reduce weight. There solved your problem in a very "budget friendly" way.
Your multi-supercharger build is cool and reminds me of a hot rod builder in real life named Brad Grey. He builds stuff like you do that runs and drives. Brad Grey Blown Mafia. Not a lot of vids out of his stuff
As a car guy i find it hilarious you got the white noise high pitched zone out over torque converters & ive been here scratching my head for 20 mins like, did this guy make the game?! How on earth do you edit those matrix numbers correctly?! I hit Ctrl I on a browser and think ive broken it!
HI dude. Been watching your videos for some time and observed this: you need to add more power to higher RPMs. At this build at 2k RPM you had around 3k HP but at 3k RPM you have 1.5k HP, that half, try to minimise the drop of HP or make it linear or always uprising. A suggestion from old modder of NFS MW, GTA SA and IV, LFS, and others.
Also for a tuning of gear box, try to have a drop between of gears of 600 RPM in low RPM engines, 1000 RPM for 3k to 6k RPM engines, 1.5k RPM drop for 6k to 8/9K RPM and 2000 rpm drop for a 8k+ rpm engines.
that's not how giant diesels work lol they're designed to run at the lowest RPM so they can have chunky parts (if they run fast, they pull themselves apart, and if they're small, they can't take the torque). I could have faked it easily, but I like "what if" instead of "wow lololol look at what I can't do" as for gearbox tuning, unfortunately it is counted on gear ratios, not via rpm, so there's either lots of maths, or in my case... guess work
@fillman86 thank you for your reply. I see your ideology here. Mine differs from yours to side for more racing type and try to squeeze more power and more efficient for a determined application. That why I suggested to you to get a linear power from 2k to 3k rpm (with a minimum drop), yes I know that big diesel for a standard street usage have around 2k rpm max power (for fuel economy and torque), but for a special and tuner usage like this, we try to get as more power for more time during more rpms range as possible.
@fillman86 about gears, yes I know its about gear ratios and not rpm, but you can tune the gears ratios to match with rpms, from your videos I belive its an easy task for 3min for playing with numbers.
Hey fillman, i have a suggestion that would make reversing vehicles with the script ai esaier, could you make a colorable reversed bodied pessima? (The 90’s blob shaped one)
Tune the gears for the power curve and tune the front suspension. Oh wait! What am I doing? I can't give you tips to make things easier, the entertainment from you suffering with modding and things is far too valuable. Ahem! Carry on to what you were doing then.
can i ask you to do one of these two things? Make a tutorial to make police lights/concealed police lights for cars or add them on to existing cars Make a "concealed lights everything mod"
Another marvellous creation from you filman, wtih your creation, can you do much to the suspension? massive four link rear for a T series, not a request just a suggest. Dang commenters with their needyness.
Hi wassup fellow Australian here i heard about you in carmightys vids you have entertaining vids actually i subscribed also beamng best car game 😎 you calling psi pessie got me weezing so hard i had a laughing fit of happiness 😂
@@ThatOneAviationEnthuiast oh I thought you were asking about my beamng exports from automation. There’s a tool in your steam library that you have to download
I know you probably dont care, but the turbos and superchargers dont make any sense together because they both have intakes and both go into the intake manifold separately
twin charging isn't that rare irl. There's a few different ways of doing it, and you never want to have them in line with each other, because in top RPM the supercharger will always limit it
lol those numbers are really not going to be accurate, as there's many other factors to take into consideration. Plus, I think this thing had like 3000+ hp
luckily the mod is still there. Each and every mod is manually approved by beamng staff, they don't work on weekends of holidays, and when those are over, they then start sorting through the list. if you're impatient, it's available on my patreon, for which you can get a week for free :)
Wheelie Popping Drag Bus might have the tyres for you.
Beta - Wheelie Popping Wentward Drag Bus | BeamNG
I feel like at this point just making full new wheels for the front by scaling up the pizza cutters and adjusting everything would have been easier
I was kinda surprised they didn't pop, so I'm just imagining them made out of 90% rubber and 10% air in the middle
perfect for ordering same-day delivery at 23.50
the lengths they'll go to, including firing people for peeing in bottles
Fillman86 Vs. MuYe in the great T-Series speed wars.
lol we both know how to make the cars unrealistically fast.... but in cheating vs cheating, I think I have the edge
@@fillman86 lol, I would say you do have the upper hand in modding experience.
Remove at least 1 side step, 1 fuel tank, 1 exhaust stack and strip any other excess items such as interior etc.
Love it !! keep up with it all!!!
oh good point, I completely forgot about weight reduction :P
The belly shake got me rolling amazing vid fastest truck in beam rn
Glad you enjoyed
Have made my own simple edits with uncapped boost and reasonable "modified" engine internals, runs pretty well.
I dont recall the times but think it made around the same torque and hp.
@@junatah5903 oh sweet if u have a channel i would love to see it
bong
@@RailsofForneywhat?
filman is always like lets do something horrible, then fks himself up, then try to fix up everything and fks up more and somehow it is just solved and filman is like *tada* the mod is ready😂😂😂😂
first draw a circle, then the rest of the owl
it's tricky, but I tend to line ducks up, then it just seems to come together :P
set red line "shift point" to like 2400rpm the engine layover is killing it shift in the meat of the power
you want to shift after the peak though, otherwise all you're getting is a worse gear ratio, and starting before power starts. The problem here was beamng weird control back end that I didn't understand
Fill, You need to increase the torque converter diameter. You are blowing thru it with all the torque and increasing the stiffness only goes so far. That value is more for fine tuning. Turn the 0.5 value into a variable and set the initial value to something like 0.65 or 0.7
Put a regular V8 in the Pickle, put it in the front on the extended frame like the dragster has, or any kind of swap that comes to mind
i remember thatb there are 18/5 drag fronds
I never really considered seeing a semi truck be given the drag treatment until now. This one looks awesome though I think it needs some more stronger front wheel (practical for drag racing of course) 🤔
I like to think it's solid steel and solid rubber with a tiny interior air part :P
I just made a drag semi with the stock parts and I thought to myself, someone needs to make a drag part version, well looks like you did 😂
I swear it's a coincidence, and that I'm not stalking viewers
I didn't even get 2 mins in and i am already laughing from the "chunky boys" btw not referring to you fill but to the way you called the wheels
lol I am chunky though. I try to diet, but as I get older, my metabolism has drastically slowed. So I'm just okay with it now :)
@@fillman86 Well, I’m glad that you’re OK with it now
8:33 that kinda give it an awsome rim look ngl
kinda have to agree with you there :)
Fill, you have gone insane
only a little
Now Thats The Fastest Truck I ever seen Than The Burnside.! Awesome Vid!
lol the burnside wasn't a truck, did you mean diesel?
Reading the torque converter description got me XD
I either have forgotten something from the recording, or I missed a joke?
We really don't know what going on in octo's brain 😄
@@fillman86im asuming he means the bit at like 20:30
SPEEED! Incredible video, well done!
Also according to yt im first (idk though so im not claiming it)
haha you'd only have watched the beginning
yt says 3rd for me lol close though
at 6:02 in the top right
cabover: oh hello there
In the transmission file, the “gearchangedelay” indicates the number of seconds delay minimum between gear shifts for automatic transmissions, so make it short enough that it changes when you want, but not too short where it shifts up and down too much
YES THANK GOD IVE BEEN SEARCHING FOR THIS FOR SO LONG
well enjoy :)
I Got 10.7 with a semi
nice, but read the description lol ;)
@@fillman86 Mods are called:
1:Big rig Upgrade
2:T series drive train expansion pack
3:Bella Semi pack
Btw Love You're Video's and Good luck for future Lets Go 100k❤
Awesome video fill!
appreciated!
hello everyone
high
orange
I'm hungry
Hi
Hgih
Also for the torque converter, the only value really needed to be changed is the diameter, a larger diameter results in the engine speed being closer to wheel speed
SPEED AAAAANDDD POWAAAAA
it's what trucks crave
@fillman86 its what bricks are made for! Gotta get my packages on time lol. Also this thing has so much torque it could probably be the starter motor for a cruiseship engine😂
Thank you for another amazing video :)
Almost at 50,000 subscribers! You're getting there!!❤❤
hey man, thanks for the 5lbs I'm glad that the video made you that happy lol
I'm so close to 50k, I can smell it!!
@@fillman86 is there a chance for a potential 50k special?
@@monkeyman9105 I've been planning one, but we'll see
@@fillman86 well I can't wait for you to reach that goal!
3:40 so... basically it's like putting the tires into disc brakes 😂
haha not far off
me when fillman uploads: :)
glad you like, but I'm under the weather, so it'll be a bit sporadic for a while
@fillman86, great video, but you want the torque converter to stall at a lower rpm so you need to increase the diameter. The value 0.5 should be increased to like 0.7 or thereabouts. Better yet would be to make it a variable you can tune
haha I didn't understand most of that code, I try to avoid automatics at all cost usually
Chunky Bois ASSEMBLE
we're the thick click
The best semi to use to transport that pure colombian coke and to get away from cops aswell
lol
at 23:00 ish second gear isnt too short, its the torque converter that is set to lock up at im assuming 3rd gear... if you notice your gaining speed in second while your rpm is staying the same so its just slipping, also when you change to 3rd instantly it pushes you back to second because your not going fast enough for 3rd
man, I love manuals so much more haha
Can you use jet liner wheels? That’s what some pulling teams use. They also build a sleigh underneath the frame so it gets over the watch a bit easier if it digs in
I think a longer first gear and launching at lower revs would help.
I always wish I understood torque converters until I remember they're for automatics, then I realise why I've never bothered :P
this is pure gold for me :D
haha I'm glad this scratched an itch for you
Classic Engine Expansion Pack is a mod, which makes the classic v8s more tuneable, with twin superchargers, a train supercharger and a twincharger.
cows can't go down staircases
Got my Mrs to sub to help you grow we both find you on our wavelength in humour and appreciate the vids dude from the UK
thanks man, I'm glad you have someone who is on the same wavelength as you, that's not easy to find :) it seems a lot of you brits like my stuff, it's appreciated
I love the way yall say aluminum
"Aluminium" 😂😂
Awesome build man!!
yall? the literal rest of the world? :P
you can use the performance ui app and set the distance to 400 meters and you can then easily time a ¼mile
oh I thought it only did 0-100kmh and any speed to 0kmh. Though I think I'll still use the drag strip because it adds to the effect in the video
That. Is. Nuts.
I could imagine the pretzel the chassis would be irl
Dragster semi trucks are using 22,5 slick tyres.
lol you americans and your funny numbers
@@fillman86 εχεμ...
Love your videos i really need to figure out how to mod the power and drive train of the cars on beam as it was easy on rigs of rods
hopefully this will help - ruclips.net/video/_b9p9POjQOk/видео.html
Fill I'm getting Automation on Monday got any tips for beginners?
Btw that blower is gigantic
lol don't do campaign, and just have fun before you bother learning how the handling graphs work
also don't start with turbos or nitromethane, they're hard mode lol
@@fillman86 wow thx
Have you thought of making a mod that replicates the doge charger daytona/ Plymouth superbird
Btw that bastion can be a sedan pls.
Is it possible to make a meshslap out of a Forza Horizon 5 model in Beamng?
It looks like to me in first and second gear your torque converter slips too much and doesn't lock up until third. Make it lock up sooner you definitely have the power to pull thru it without bogging down the engine. And if it does just add more power.
i hope i dont sound weird when i say you sound like a british markiplier
I might sound more like that if I was British too lol
lol i didnt even realize i had downloaded this mod i used it to destroy my friends in a drag race.
lol
One question: why not dual axles for extra rear drag wheels and tires? And all are connected to the engine. Asif. you just took a stock dual axle truck, gave it a drag engine and some bigndrag slicks and nothing else.
lol that wouldn't be hard to do, but it'd be pointless as it didn't have traction issues anyway
@@fillman86 give it more boost than lol. And remove any unnecessary weight. And also make the frame out of fiberglass to reduce weight. There solved your problem in a very "budget friendly" way.
This sounds like something I should try 🤣
haha it at least looks awesome
Well, I took on the challenge.... Currently sitting at 9.8s 🤣
Your multi-supercharger build is cool and reminds me of a hot rod builder in real life named Brad Grey. He builds stuff like you do that runs and drives. Brad Grey Blown Mafia. Not a lot of vids out of his stuff
Can you please make a wheel/tyre pack for the t series …. I made a setup for low 10s but spin all the way down
Reminds me of my fs17 moddung days. Great video.
haha I tried to mod in farming simulator, but the documentation is mostly non-existent
@@fillman86 Giant has their own software to do it. It's not too hard.
As a car guy i find it hilarious you got the white noise high pitched zone out over torque converters & ive been here scratching my head for 20 mins like, did this guy make the game?! How on earth do you edit those matrix numbers correctly?!
I hit Ctrl I on a browser and think ive broken it!
How you put truck engine to the car xD i can choose only this available for car I already use
Fillman pls make bruckell bastion with engine from seviper and turn it in to bruckell seviper. I think this car Will be an great deathtrap.
Yup
Hey fillman whats the background music you used? i wanna try using it in one of my own videos if you dont mind
if you go into youtube studio, there's a section called "Audio library" where there's a bunch of free music
thanks alot dude!
Let's just forget that drag truck and drag semi-trucks don't exist now.
haha never really watched drag racing, so I don't know
HI dude. Been watching your videos for some time and observed this: you need to add more power to higher RPMs.
At this build at 2k RPM you had around 3k HP but at 3k RPM you have 1.5k HP, that half, try to minimise the drop of HP or make it linear or always uprising.
A suggestion from old modder of NFS MW, GTA SA and IV, LFS, and others.
Also for a tuning of gear box, try to have a drop between of gears of 600 RPM in low RPM engines, 1000 RPM for 3k to 6k RPM engines, 1.5k RPM drop for 6k to 8/9K RPM and 2000 rpm drop for a 8k+ rpm engines.
that's not how giant diesels work lol they're designed to run at the lowest RPM so they can have chunky parts (if they run fast, they pull themselves apart, and if they're small, they can't take the torque). I could have faked it easily, but I like "what if" instead of "wow lololol look at what I can't do"
as for gearbox tuning, unfortunately it is counted on gear ratios, not via rpm, so there's either lots of maths, or in my case... guess work
@fillman86 thank you for your reply. I see your ideology here.
Mine differs from yours to side for more racing type and try to squeeze more power and more efficient for a determined application. That why I suggested to you to get a linear power from 2k to 3k rpm (with a minimum drop), yes I know that big diesel for a standard street usage have around 2k rpm max power (for fuel economy and torque), but for a special and tuner usage like this, we try to get as more power for more time during more rpms range as possible.
@fillman86 about gears, yes I know its about gear ratios and not rpm, but you can tune the gears ratios to match with rpms, from your videos I belive its an easy task for 3min for playing with numbers.
@@fillman86 anyway. Keep going doing great stuff. I see you are getting better and better.
Low torque converter is good for speed and high is good for torque. Hope you find this helpful
hmmm I meant more in terms of drag racing
should have added another rear axel
Hey fillman, i have a suggestion that would make reversing vehicles with the script ai esaier, could you make a colorable reversed bodied pessima? (The 90’s blob shaped one)
Can u please make the front tires bigger? As the current size is unrealistic
if they are made of near solid rubber, they'd be totally fine
Tune the gears for the power curve and tune the front suspension. Oh wait! What am I doing? I can't give you tips to make things easier, the entertainment from you suffering with modding and things is far too valuable. Ahem! Carry on to what you were doing then.
gAVRIL tURBINE jET GOES OVER 600MPH
Beta - Unusual engine pack for the wentward/T-series | BeamNG
This helps.. Turbo Everything + Twincharge Everything | BeamNG
the cab over semi is faster than the standard cab.
yeah, it'd be lighter. Counter point.... I can see the supercharger easier this way
@@fillman86 true
Bit off topic but was wondering how the Praga R1 was coming along? I'd love to have that in beamng
tbh it was a bad mod that was rushed, so I just kinda gave up to it :/
@@fillman86 No worries man. Appreciate the reply anyway. Love the vids!
Videos live this make me wish beam supported mac :( great video fill keep it up!
can you dual boot into linux? there's support for that :) I even made some videos on it
@@fillman86 I haven't thought of that I might have to give it a try
can i ask you to do one of these two things?
Make a tutorial to make police lights/concealed police lights for cars or add them on to existing cars
Make a "concealed lights everything mod"
this will help you ruclips.net/video/_b9p9POjQOk/видео.html
Put a big jet engine on it and make it spit fire!
Like the one in real life...
already on the list
Can you PLEASE make a roll cage for the D series! Pleeeeaase!!
I meant the Semi NOT the d series
Sick
I suggest seeing a doctor
No I meant it's cool
@@Yesdontask maybe wear a thick coat then?
drag semi trucks just use regular wheels on the front
be that as it may, I liked the look :P feel free to put normal tyres on your version, I'm just an idiot
wheels and front tires need to be larger
haha probably
Nice video
You haven’t even watched it
though it is a safe assumption? :P hopefully
What program do you use?
primarily blender and visual studio code
Another marvellous creation from you filman, wtih your creation, can you do much to the suspension? massive four link rear for a T series, not a request just a suggest. Dang commenters with their needyness.
that is a lot of effort, so probably not. Not to mention that traction and its ability to handle power isn't an issue yet anyway
I have a scooby doo van I modified fir 6 hours and I got it to do 6 seconds
nice work
Are you Able to make stronger drive shaft, mod or all cars and trucks
that mod already exists
Fillman can we get semi airbags, so that we can slam the semis
they already have airbags, you just mod them from there
Hi wassup fellow Australian here i heard about you in carmightys vids you have entertaining vids actually i subscribed also beamng best car game 😎 you calling psi pessie got me weezing so hard i had a laughing fit of happiness 😂
hey, I'm glad to see other australians here :)
i need to ask something how do you upload your stuff from automation to the steam workshop?
sorry, your question doesn't make sense
@@fillman86 how do you upload mods to the steam workshop srry about that i was tired at the time
@@ThatOneAviationEnthuiast oh I thought you were asking about my beamng exports from automation. There’s a tool in your steam library that you have to download
@@fillman86where is the tool may i ask?
@@ThatOneAviationEnthuiast lol already said that
Good morning 🌞
lol it's nearly 11pm
lol it’s 7 am here in America
I was here before this blew up!!
haha I hope it blows up, but you never know
Hard mount dew ad real
lol
Should have made the wheels taller and they would have worked
I know you probably dont care, but the turbos and superchargers dont make any sense together because they both have intakes and both go into the intake manifold separately
If you put the turbo charge pipe into the supercharger intake it would work
twin charging isn't that rare irl. There's a few different ways of doing it, and you never want to have them in line with each other, because in top RPM the supercharger will always limit it
can i download this mod? i dont see it on the repo
It's an update to the v12 truck mod I made, it should be at the top of the list of my mods on the repository site
@@fillman86 alright thank you 👍
Your car in order to go under 10 seconds needs 600hp, I doubt a 500hp car is slow, but you are an youtuber so is is all right. ^_^
lol those numbers are really not going to be accurate, as there's many other factors to take into consideration. Plus, I think this thing had like 3000+ hp
fia truck racing next?
already on the list :P
what about muye?
if he had have asked me, I would have given it to him
please reupload the v12 t series
I can’t find the updated mod😢
luckily the mod is still there. Each and every mod is manually approved by beamng staff, they don't work on weekends of holidays, and when those are over, they then start sorting through the list.
if you're impatient, it's available on my patreon, for which you can get a week for free :)
Oh Thanks for answering ❤
gavil 🦽
the big vroom
PLEASE CAN YOU MAKE BANDAG BULLET PLEASE!!!!
link for whole mod !
www.beamng.com/resources/2-i6-engines-welded-together.27034/
Honestly u should have made the font tires bigger and taken off the mud flaps just sayin 🤷
I like to imagine those tyres are 90% solid rubber haha
@@fillman86 lol
It's pounds-feet. love you bye
I've never weighed just my feed before, or are you talking about the british currency?