How to Strip a Durabrite - Evan's Detailing and Polishing
HTML-код
- Опубликовано: 27 авг 2024
- Evan shows you how to strip an Alcoa Durabrite in under 20 minutes. Wondering what we use to achieve these results? Check out the links below!
All of these products are available at www.amazon.com... or by the individual links.
Makita ga7021 amzn.to/2RPDBoo
6,000 rpm
Dewalt D28499X amzn.to/2JZqw9j
6,000 rpm
Makita 9927c amzn.to/2TaKL8n
3500 rpm variable speed
Dewalt dwp849x amzn.to/2qIZ7j9
3500 rpm variable speed
Orbital buffer for paint
15 mm orbital
amzn.to/2VWSM2l
Porter Cable
amzn.to/31saU5d
White cotton towel options
12 x 14 (100 pack) amzn.to/2SHAm3r
12x 12 (24 pack) amzn.to/2C5evLU
Makita 5" da or random orbit
hook and loop amzn.to/2SxCY3r
Extension cords
100' 10 gauge amzn.to/2Sqclko
50' 10 gauge tri tap amzn.to/2t6PHPJ
100' 12 ga amzn.to/2GgOFJJ
50' 12 ga amzn.to/2TA5nXs
20 ton jack
amzn.to/3343V4i
20 ton air jack
amzn.to/2qSNTvJ
20 ton stubby jack for low axles
amzn.to/2PzRc5e
20 ton stubby air jack for low axles
amzn.to/2JA9ShK
Getting clean after polishing.
Suave men’s care 3 in 1
amzn.to/37u6K0r
Lava bar soap
amzn.to/2ZxfZda
Under new law I have to proclaim these links are associate links and I get paid for the sales of these products.
Nobody can match the quality of work you do!! Thanks for sharing your experience with us!!
I appreciate that, thank you for watching.
Evan there is a business in Titusville Fla called Scrubs Auto/RV detailing. It takes Chuck two days to do my 40 ft motorcoach top to bottom and front to back. And he is always busier than a one legged man in a butt kicking contest He spit shines the whole unit not missing an inch, He does a great job such as yourself and he also has a very loyal following. Each year when I arrive in Fla for the winter I have my coach detailed by him and am always pleased with the results. So let me give you and Chuck a tip of the hat for the fine service you and Chuck provide to your customers. Of course a nice tip at the end of the job is a nice thank you too!!
Much appreciate the compliment. Truly means a lot. Thank you for watching my videos and supporting the channel. Really appreciate that.
Amazing work like new
Thank you.
Thankyou I have used them on cast car parts but not truck parts yet but I've been polishing semi trucks in the northwest for around 15 yrs or so but I'm really interested to try this procedure!!
DJ Vincent we’ve had really good luck with it. Cuts down time and sandpaper consumption.
Evan Steger top shelf buddy
Thank you bud. Truly appreciate that. Thanks for watching.
Will this work on any clear on aluminum wheels?
Yes it does. goshineon.com has a durabrite strip and repolish kit that works perfectly for this.
I need a wheel stand. Do you sell them? Or show a video on how you made yours
Shine n go sells them.
I work for a guy who you've spoken to on the phone a few times from southwold Ontario canada his names steve over at SRS polishing. We use tetrachem for durabrites, spray on, Wait 30 seconds power wash off. Then we sand. How come you go through the time with an abrasive wheel? Just sparring the use of chemicals ?
NEVER heard of Tetrachem. Sounds awesome. I would love to save the sanding time.
I might be over thinking this, but wouldn’t a downdraft room such as a paint booth, make it easier to help control all the dirt and dust generated with your process.
Dan Davis yes it would but it’s very pricey and metal polishing isn’t a big moneymaker.
Could you tell me what grit paper you finished with on the da and also what rpm is your grinder. thank you
Blacksmith Johnny 400 grit and 6,000 rpm grinder.
Do you reccomend against durrabright? Why grind it all off?
DieselPunk Cummins the coating doesn’t last forever and starts to get foggy or hazy. So we strip and shine it back up.
would you recommend against getting it up front or avoid it all together?
DieselPunk Cummins I’m personally not a fan but to each their own.
How can you tell whether or not it's a dura bright or accushield rim?
@@Mad-i134 .. if there's no sticker on it saying DURA BRITE.. you can rub a small amount of aluminum polish onto rim with a cloth as if you're gonna polish it.
If it does NOT turn blackish, and oxidize the contaminants when you do this, it's DURA BRITE coated.
You are using drill master buffer in this video so do you use that and sell it
No we don't sell any buffers.
were can i buy a micheing like that were you put the wheel too turn
shine n go in michigan sells them.
How to charge for the work..rims..tanks..grill..diamond plate step box..
X Treme I charge by the piece based on condition.
And this is the reason I can only polish my wheels to an extent.
Glad you like it.
What is the durabrite coating made of.
When they make these wheels are they polished and painted with a special durabrite clear coat.
Must be good stuff to stick to alloy to trap the shine
Not sure what it is made of but it is an absolute nightmare to get off.
Apply aircraft stripper and power wash off
@@davidmartins4666 I've never gotten that to work.
I don’t know why you would want to strip a Durabright,unless it was really hammered.
@@robertcrawford7585 We strip thousands per year.
Sure make it look easy. It’s not. Great job 👍
Been doing it for 20 years. LOL It is easy when you've done it a million times. Thank you for watching. Appreciate that.
I couldn’t find the wheel you used on your grinder do you mind telling me the name or giving me a link... please and thank you
Jeremy Duran goshineon.com/shop has the durabrite strip kit
Evan will you do a vid on your wheel machine like the one in this vid your working with?
We have multiple wheel machine videos here on my channel. Is that what you are looking for?
Yes sir I really have learned a lot and can’t wait to take your class some day
@@1nicesonoma934 loo forward to meeting you. Thanks for watching.
Just a quick question Evan. Do you guys sell the wheel you are using there or could you tell me what it is so I could find it easier? I've got some car wheels with peeling clear coat I think that would really make it easier to clean them up before polishing. Thanks! You've always got great videos!! Keep it up!
Dalton Carr goshineon.com has all the products in this video.
Dalton Carr goshineon.com/shop
Sand them down and buff them LMFAO
Why remove the durabright finish? I'm thinking of swapping mine out for some
Because the finish fades and peels.
its garbage, after several truck washes it will start peeling off and will look like crap.
Yes they do.
They peel.. show sctatches.. are cloudy..
Awful
Several durabrite wheels on my glider turned yellow, looked like a dog pissed on them.
And what grit does that pad finish up at for next step?
DJ Vincent 180 blue disc. 320 red disc.
where do i get the extension for the machine .thanks
Overtheroad 2005 goshineon.com/shop
Where did you get wheel stand from
Bood droe I made it.
Thanks answering the question now I don't have to ask it.
So on the orbital sander you used what two grits?
This specific video was 320-400
@@EvanStegerMetalPolishing Thanks. I didn't just want to polish to a factory brite. I want a Steger brite.
@@ismaelcarrillo3956 I understand. Just sand it super smooth and do a couple cuts before coloring. You'll kill it.
How did you make the mount or wheel rack the wheels mounted to?
My father and I welded a wheel hub and stand together and put a jack on it to lift and lower to the height I wanted it.
About what rpm would you say you are running on the variable speed?
DJ Vincent 2600
Evan what is spinning the wheel in this video. How can I buy one
My foot. LOL I built a wheel stand when I was in my early years. But have since bought an upgraded version.
@@EvanStegerMetalPolishing I just got my wheel stand from shine n go. Had to finish welding it the forgot a weld. Lol seems to work good.
Makita, bosh, dewalt? which better
santos cesar anything 6,000 rpm or less.
I was thinking what can be bright shiny then dura bright and now I m scratching my ...
Whatcha mean??
That’s cool
Thank you
How do you deal with corrosion pitting
Sanding usually works but there are some pits that are just too deep to get all the way out.
How much did you charge for this wheel Evan??
We do them on the wheel machine now so my pricing isn’t accurate anymore. Lol
Where can I buy a wheel machine like that
The jig? I built this one 15 years ago. It is long gone. Many people built their own. A few companies out there making them also.
Ok muchas gracias
you know somewhere where i can buy it
@@adrianselema1630 ShineNGo sells a stand
This video is totally backwards. Even I know Evan buffs the other way. And I just found him ! 😂
This is me. Lol. Just a really old video.
You should make a video showing the wheel hub design you created that would make life so how easier for me. Can you use it for polishing the inside of a rim as well. ?
I have video called polishing jigs. Shows the entire thing.
I found a video called prep stations. I’m guessing it’s that one.
You got it.
Супер. Плохо что в России нет данных материалов для полировки
I'm sorry but I only speak English.
Evan Steger Sorry, brother. I didn't mean to offend. Good quality of the work performed, it is bad that there are no such materials in Russia
@@user-er1yb2nd1s Didn't offend me. I honestly didn't know what you said.
what kind of wheel is that you're sanding with on the variable grinder?
I need some if them!!
PRESTIGE CUSTOM METAL POLISHING goshineon.com/shop
Like new!
Thanks for watching
What is the charge per wheel for this process?
All depends on condition.
What kind of rotating stand is that?
It's custom built.
Is it motor driven or rotates from the force of the grinder?
+charles brown rotates from the force of the grinder and my foot.
I would definitely b interested in building a stand like that,could I contact you on building tips?
Boss wants me to tackle are low boy it's got the dura Brights I'm trying to figure out where to get those scotch pads
goshineon.com/shop has a durabrite strip and repolish kit
What the polishers say is a finished product has lines in it and is never totally reflective. If I could show you a picture I would. I always have to follow up behind them.
That's too bad. It shouldn't always be like that. We can't promise perfection all the time but you shouldn't be leaving lines.
مرحبن مكن
Thanks for watching.
تعرف عربي كلام
تعرف لغه لعربيه
What the hell is a durabrite??
A clear coated Alcoa wheel.