Chamber of Destiny Model Test
HTML-код
- Опубликовано: 21 янв 2021
- Hello! These are much older videos and ones in this playlist may be missing parts and context. Here's a look at the little things this channel use to do before and some of the early How It Works videos that use to go by "How Does This Ride Work" (quite a lengthy name) Here is a full motion and lighting test of my Chamber of Destiny model.
Hi, welcome to Amusement Labs. Here I'll show you the awe inspiring engineering behind your favorite rides with information and footage you won't find anywhere else.
Let me show you around:
⚙️⚙️Virtual Grand Tour⚙️⚙️
bit.ly/ALabsTour
⚙️⚙️Support⚙️⚙️
bit.ly/ALabsPatreon
⚙️⚙️Follow Me⚙️⚙️
/ coaster_labs
/ amusementlabs 
Развлечения
![Megan Thee Stallion - Otaku Hot Girl [Official Audio]](http://i.ytimg.com/vi/USxIYOaIpig/mqdefault.jpg)
works better than disney's
Even has the fake tyre marks on the unused paths. XD Nice work.
You noticed! 😀
@@AmusementLabs It's something that drives me nuts with "Trackless" dark rides. The story wants you to think you're avoiding danger at every turn, but you can see every swerve and diversion miles before it actually happens. The original Test Track was bad for it as well. Remember the ABS test?
@@Sn0wc4t that's true, I think that's why often lights point up from below as to keep as much light away from the floor. Additionally on Indie and all the other installations you're seated high up and the turns are tight so you can see very little of the slot.
I can’t wait for the day when they create a trackless ride system that can be as physically intense as Indiana Jones. The few trackless rides Disney has now use special effects and sets to make up for the slow moving vehicles and flat terrain, but it would be cool if they could implement hills and drops safely into a trackless ride. Then it would be really unpredictable!
OMG I thought the door all moved!! I didn’t realize there was only 1 working door and 4 faux doors🤯
If only the ride still had this effect working
Doesn't this happen anymore?
@@adambezark2293 The effect is removed and replaced with projection mapping.
@adambezark2293 the parts to revolve the room were really finicky and had to be repaired often so, when the company they used went out of business, they just dropped it unfortunately ://
The oddest memorable feels to things from 90's childhood that stick with you for life.
This is great. Really illustrates how it works. The lighting effects are great too.
Ha! I was there opening week of the ride and it took me four times to see all the “ different” opening entrances. Ha! I want my time back lol
That is so cool! I never quite new how that worked until this video.
I NEED TO SEE MORE OF THESE!!!
It's a shame Disney couldn't keep this effect running.
Because they have missed managed there money by overspending for Galaxy Edge that is not so Good Except for a few things for 14 Acers of land it was a big waste for stupid shopping they could have done 4 major rides or two major rides and three moderate rides.
Company that built it went out of business. Not Disney's fault
@@user-sg2kh9fn7s You must have not gotten a pass for Rise Of The Resistance lmao
Ik that ruins the day
@@adew6332 I have Ridden Rise it's one of the few things nice about Galaxy's Edge!
So cool! I wish I could have seen this in its heyday.
Ahhhh that makes way more sense! Very cool
Well done!
Good work!!
This is awesome!!!
Best visualisation of this I have seen!
Yeah, it's satisfying to actually have a physical model and get to rotate the walls and ceiling.
@@AmusementLabs The best I have is a ride simulator I made for it. Also, this has great audio quality! I could not find any this good in my searches.
@@willowby I actually found the audio bits from this video and recorded them over OBS. Then I made the audio sequence and then adjusted my code that controls the lights to sync.
@@AmusementLabs Very efficient, I do that too.
This looks cool
Please do a breakdown of revenge of the mummy
Just saw someone talking about this same effect on Reddit!
That's me 🙂 my old channel name was coasterlabs, but there is someone else who also made a model out of cardboard recently.
DID YOU 3D PRINT THIS. THIS IS THE COOLEST THING I HAVE EVER SEEN
Yes I did. Three times actually. 😅
(Cause steps/mm were set too high everything was oversized)
@@AmusementLabs that’s amazing dude, keep up the amazing work. Just so you know, if you made a channel where you just made ride models and did the motor work and stuff, I would watch!
Hummm, I just had a thought. In the ride the 3 doors have 3 different symbols that correspond to the chamber you go down. With this model, doesn't it mean that the symbol for the door would stay the same each time? And looking at ride POV from 7 years ago the symbol did correspond to the chamber, w/o a projection to alter the symbol. It had a physical presence. This is still AWESOME, but I think the door function may be off... But also, what do I know.
There's a clip from a news segment showing that the archway moved with the ceiling/rafters. The doors themselves are/were all the same and the rafters and archways would move to align with the real door. I didn't include the symbols in this model cause that would've taken too long to design in and at this scale it wouldn't look that great.
Here's a video from an operations monitor camera: ruclips.net/video/cMPOdVNw4yQ/видео.html
If you look up the video "Disney After Dark: Indiana Jones Adventure", you can get a clearer view of the door w/o projections when the feature worked, and it appears that the same door with physical snake designs opens and closes. So there are projections that alter the three doors corresponding to their respective chamber. Disney just does a good job with the illusion.
@@AmusementLabs that is awesome. Thanks so much for explaining! This is a fantastic project 👍
@@Bmn360 yes, the new projection effect was the end of the physical effect and the projections kind of fudge the door order so the middle door could be any of the three. So each time the doors kind of get scrambled.
It really sucks how this effect will probably never work again in real life.
Can you explain the Enchanted tale of beauty and the beast in TDL? That one looks fun
Here You Go: ruclips.net/video/vX62ijsGv5Q/видео.html
@@ParkMind I think they meant the one that just opened at Tokyo Disneyland.
@@AmusementLabs whops lol
What year did they stop doing this?
I’m gonna make a Terraria mod based off of this ride, and it’ll include these doors (which you can choose), and this amazing sound. You will then be met by Mara
Yup that's how it works though the last part is not apart of that section.
Oh I know, I just didn't make the room so I just made do with what I have.
Wait what?!?!
You should do how fast and furious works/ Kong because no one is driving the vehicle so how does it run?
If I did F&F I think I might have negative subscribers within the month...
@@AmusementLabs lol I can dream
You need to like.. make copies and sell them!
Please tell me you're building the full ride....
I wish I had the space, but alas, I do not. :(
One of the eight world wonders have been solved!
This is glorious
How much for the module? I’ll pay anything
Oh, I've never gotten an offer as it's not entirely for sale (yet), but if I had to maybe $150 + shipping?
you should scale this up to the whole ride. You've gone this far, why not go all the way?
I wish you did more of this.
I do too, but it mostly doesn't bring people to the channel sadly.
@@AmusementLabs understood.