I used to watch your channel when I was younger even got myself a elite. Then I sold it but years later I got another and I’m glad to see your channel is still going strong 💯🙏
You guys motivated me to work on my Tao tao "50cc" Stock 139qmb @ 27mph Today it went 47.1mph Current setup: 50mm BBK - Glixal ATKS-029/ A9 Camshaft Glixal 7g variator sliders Stock clutch & springs Stock intake & Carb (#78 MJ) Unbaffled Muffler *Still tuning Carb & variator weights cause in top end feel very limited. Have fun guys! and always be safe!
My 01 sr elite with TFC bell and driveface, polini Var 45g rolls, polini sport clutch, new stock belt, stock exhaust, shed about 736g off the CVT does 48mph all day, and dremel the half open port on the air box. 78 main jet
I always look forward to a new MopBoyZ video on Sundays, relaxing with some drink and smoke on the day off. Much love brotha ride safe, and enjoy it while you can ✊️
@@henrywood5462 that's dope man, what brand and cc U getting? I'm currently working on a Piaggio zip type 3 from 50cc to 150cc. And from there order a 172cc kit. Also looking for 2 250cc dirt bikes for me and my buddy.
I will give ya a good luck charm b4 your hunt ! In my area houston (big city) these honda elites and zuma prebugs are incredibly hard to get deals on they sell super fast like within the hr of being posted I landed a 2000 purple elite 50 sr 2 weeks ago I got in a bidding war thing ran up to 1300$ be guy said come get it give u 1 owner all paper work and titles in hand all stock ! Took me 5 years to find one with a title and stock ... lol places like Cali and AZ they seem to be more available I guess you would call it more of them way cheaper not in texas though
Dude, I have a 100cc(qmb139) peace sport.4 stroke. I polished the head. 12.5 to 1 comp. With a Makini racing carb..Hoka gears. Ect ect ect. I run the 1/8mile at 72mph 7.8sec. I race street cars on Friday night. The length of two telephone poles. And gap them.
@@teun3526 it is, engine was rebuild with new crankshaft and bearings on 15kkm because was crap from the factory, and still working today, with original cylinder and piston I was doing a lot 300-400-500-600km road trips with that scooter with no fear, always on full throttle
This looks exactly like my DJ-Kymco 50cc later 70cc scooter I drove in the 1990s in Holland,. It was very famous and pretty reliable. And easy to make it run fast.
Here in Denmark a 50cc scooter or moped is only allowed to have 1.2hp and 20mph. if you make it go faster and get pulled over by the cops you get a pretty big fine the first time and they will take your go fast parts on the spot, the second time you get pulled over they take your vehicle
You can get even more out of it for free. That would be a great video, do like the drilled muffler, drill out the main jet, take off air box port and polish and a pop can head gasket...
You ever have an existential crisis about having a garage packed with bikes? xD I got 99 problems and 12 of them are 2 strokes and sometimes I have a "why did I do this" moment lol. But I love 'em. Hate selling too because more often than not they get trashed by new owner and it hurts to see. Tryna get the homies to ride is a chore as well 🤣
Could you make a vid on how to build a 50cc stunt scooter? Im building a abandoned dio zx and i want to make it into a stunt scooter and i learn a lot from yall
Hi from Northern Ireland! What's the engine model on this one? I've got an af05e, max speed is 32mpg on the straights, 35 down hill, I'd like to get 45mph from it.
Hey bro I'm going to rebuild a BWS from 2003. I wanted to do some updates on the engine, everything in general. What would you advise me to do? Thanks, a big hug from Portugal.
Yo my stock 50cc yamaha bws will barely idle but dies as soon as i even touch the throttle. Every part is new, good compression spark, everything. Got any tips on tuning the carb so i can get it to run?
I have a Roma superhornet 150 that was doing the same thing. I'm not a tinkerer myself so I just paid to have the carb cleaned and tuned. Works just fine now
Awesome channel and videos my man. I have a 2009 eton beamer 3. Can you recommend a variator kit for it. I have a tecnigas exhaust. Just want a little more top end hitting about 38 right now.
@@jamiediseker9232 you can buy a derestricted/ racing cdi online search your brand and model + cdi and then you will see Some. I dont recomend going on the highway
Motivate me to put upgrades on the Scooter? I just brought a Brand spanking New Suzuki V-strom, the scooters going to have to beg for attention... actually no, it needs to come apart to get some new rear wheel bearings, some plastic repairs, the restrictor was taken out very quickly, the exhaust may get changed. and I think I may have some jets to try. But the Main focus at this point is putting a Top box, Panyards and maybe some better foot pegs on the V-Strom
So i scored a elite 50 sr i know thats the unrestricted US model . With there being so many damn options you can do with af16e and all the af18 parts from japan and overseas . You think a variator is even worth it gains wise . My thought is keep it stock until it needs a top end . Thinkin yellow contra , variators and rollers maybe a fresh clutch. Just not sure which variator readup the polini and malossi seem to be the go to and some say kelly . BUT overseas it seems alot of the dio af18 guys run TWH brand parts . What ya think ? Also noticed theres a couple different size variators for the af16/af18 which and why ? Im all ears on this
what kind of rollers did you put on it the second time? i am going to do the same with my scooter and thougth about 5.0 gram rollers but mby thats to ligth?
![Kumamoto Masters Japan 2024 | Gregoria Mariska Tunjung (INA) [5] vs. Akane Yamaguchi (JPN) [2] | F](http://i.ytimg.com/vi/EIjZybhsWqA/mqdefault.jpg)
#1 scooter guy by a long shot
thanks man!
💯
The scooter RUclips goat
Truth. At least in North America and probably the rest of the continent.
Been watching he had like 35k
I used to watch your channel when I was younger even got myself a elite. Then I sold it but years later I got another and I’m glad to see your channel is still going strong 💯🙏
Love my stockish Elite. Variator, shims, belt and ncy pipe works wonders
I have an CPI Aragon gp whit extra giannelli Pipe and somthing else tuned bc its used
You guys motivated me to work on my Tao tao "50cc"
Stock 139qmb @ 27mph
Today it went 47.1mph
Current setup:
50mm BBK -
Glixal ATKS-029/ A9 Camshaft
Glixal 7g variator sliders
Stock clutch & springs
Stock intake & Carb (#78 MJ)
Unbaffled Muffler
*Still tuning Carb & variator weights cause in top end feel very limited.
Have fun guys! and always be safe!
Please make more of these videos they are so cool and teach me alot!
thanks man will do!
My 01 sr elite with TFC bell and driveface, polini Var 45g rolls, polini sport clutch, new stock belt, stock exhaust, shed about 736g off the CVT does 48mph all day, and dremel the half open port on the air box. 78 main jet
Very cool! I wish they still made Elites, they look so much more my style than the Metropolitan, Ruckus, or Navi.
I always look forward to a new MopBoyZ video on Sundays, relaxing with some drink and smoke on the day off. Much love brotha ride safe, and enjoy it while you can ✊️
Enjoy! thanks bro
How many others watching this, but you don't own a moped
Me, but I would never ride one in my town. To many people with giant trucks and SUV's that can't drive, would get killed on one here.
Scooter*
I think i should have bought a scooter instead of a motorcycle
Me, but I’m getting a dirt bike soon
@@henrywood5462 that's dope man, what brand and cc U getting? I'm currently working on a Piaggio zip type 3 from 50cc to 150cc. And from there order a 172cc kit. Also looking for 2 250cc dirt bikes for me and my buddy.
Bro is riding and pulling wheelies down to Groove street, home!
this is nice! I'm on the lookout for a cheap 2 stroke scooter. before this video, I was avoiding all 50s.. but this changed my mind
I will give ya a good luck charm b4 your hunt ! In my area houston (big city) these honda elites and zuma prebugs are incredibly hard to get deals on they sell super fast like within the hr of being posted I landed a 2000 purple elite 50 sr 2 weeks ago I got in a bidding war thing ran up to 1300$ be guy said come get it give u 1 owner all paper work and titles in hand all stock ! Took me 5 years to find one with a title and stock ... lol places like Cali and AZ they seem to be more available I guess you would call it more of them way cheaper not in texas though
normal 50cc 2 stroke should go 40mph..... without anything blocking on varioator.... just get sport exhoust it will go almost 50mph
Just change it to 70cc later on if it feels slow
What part of Houston. Im here too!!@nathanw5747
It's amazing what a few little bolt on parts will do you can hear the difference big time with that pie
i had an elite 80. would push 50 mph stock. no rear plastic but could fit 2 forty ounces in the front compartment. 🍻
Would actually be cool to see how it performs with JUST the unrestricted variator, then with the performance parts.
Glad to see RUclips isn’t hitting you on the wheelies this time . Cheers
Getting malaguti f12 70cc soon in great condition 🤩
Duuuuuude you are flying and runnin with it.
I Had a new Elite back in 1990. In Australia they would do more than 40MPH from the factory which is about 60-70KMPH
Dude, I have a 100cc(qmb139) peace sport.4 stroke. I polished the head. 12.5 to 1 comp. With a Makini racing carb..Hoka gears. Ect ect ect.
I run the 1/8mile at 72mph 7.8sec. I race street cars on Friday night. The length of two telephone poles. And gap them.
I have a bone stock 2 cycle Zuma and this is exactly what I'm looking for, I want to keep it reliable and stock looking so this will be perfect!!!!
The Piaggio hyper2 engine in my opinion is the best for building, and the Piaggio zips are the best for wheelies
hyper2 engine is amazing!
i have the hyper 1 engine from 1994 haha
Hyper2 is great engine, mine has 76 000km and still runnin
@@Ice-T. Thats a lot
@@teun3526 it is, engine was rebuild with new crankshaft and bearings on 15kkm because was crap from the factory, and still working today, with original cylinder and piston
I was doing a lot 300-400-500-600km road trips with that scooter with no fear, always on full throttle
If only it were legal in italy 😂 (im gonna do this anways)
Live like royalty 😂👑
the first 20 seconds of the video goes hard af
This looks exactly like my DJ-Kymco 50cc later 70cc scooter I drove in the 1990s in Holland,. It was very famous and pretty reliable. And easy to make it run fast.
Here in Denmark a 50cc scooter or moped is only allowed to have 1.2hp and 20mph. if you make it go faster and get pulled over by the cops you get a pretty big fine the first time and they will take your go fast parts on the spot, the second time you get pulled over they take your vehicle
Godt tip, ikk stop.
You can get even more out of it for free. That would be a great video, do like the drilled muffler, drill out the main jet, take off air box port and polish and a pop can head gasket...
Cant believe its poppin up at 25, my typhoon needs like 10mph or less otherwise it wont come up and you know I done put some money in it too, hmm
I been locked up for the past 8 months months jus got out this morning and was blessed wit a new video lol hell yea
my dude is free, congrats man
Appreciate it man lol I'm glad to be hone
Hienosti keulii skootteri 50cc:lläkin mopopojat! 😎🔥
Is there difference in 2 stroke 50cc vs a 4 stroke 50cc ? I have a 4stroke 50 thats almost 485lbs and a 2stroke 50cc thats not even 300lbs
reliable and not super fun or not as reliable and more fun
2 strokes only for me
2 stroke has twice the power of a 4 stroke. The upgrades he showed in this vid will only work on 2 stroke not 4 stroke scooters
@@Taxi-gc7xsthe variator will still work on a 4 stroke
You’ll spend a lot more money trying to build a 4 stroke than a 2 stroke scooter and still probably not be as fast as a built 2 stroke
You ever have an existential crisis about having a garage packed with bikes? xD I got 99 problems and 12 of them are 2 strokes and sometimes I have a "why did I do this" moment lol. But I love 'em. Hate selling too because more often than not they get trashed by new owner and it hurts to see. Tryna get the homies to ride is a chore as well 🤣
Ask your boys over at the scooter swap shop when they will start restocking these exhausts
Every video is a pleasure❤
The dude lives at Grovestreet 👊🏻
Love those Honda s . Use to have one new
Could you make a vid on how to build a 50cc stunt scooter? Im building a abandoned dio zx and i want to make it into a stunt scooter and i learn a lot from yall
Great upgrade
i thought i subbed to you a while ago when i get bored and wanna watch a zuma i just watch your vids of you building one
Awesome video!! I was looking for simple upgrades. Where do you find your scooters? I been looking in Chicago area and they’re expensive for used
Did you use the stock variator boss with the pollini variator?
i believe i used the one from the polini kit!
I have a 1999 SR, should I I just put heavier rollers in it Instead of buying a variator?
@@fireballs412 heavier would make it slower on take off , depends what you want
@@MOPBOYZ stock 50 right now just looking for a little more top end, have an arrow pipe as well
Would these same parts work on an e-ton beamer?
Isn’t the air box restricted? I thought the elite S need both little air ports opened up?
The unrestricted model for US is the Honda elite 50 Sr ! Mine stock runs 40 ish + !
@@nathanw5747yup but the elite S is restrictive pretty sure the air box is a restrictive on the S model
So sick can i do this to my ice bear rocket?
I’d love to see you modify an 83 aero 50(That’s what I have)You have to do some port matching and you can big bore it.
Hi from Northern Ireland! What's the engine model on this one? I've got an af05e, max speed is 32mpg on the straights, 35 down hill, I'd like to get 45mph from it.
this is af16. there’s no real aftermarket for af05 sadly
Hey bro
I'm going to rebuild a BWS from 2003. I wanted to do some updates on the engine, everything in general. What would you advise me to do?
Thanks, a big hug from Portugal.
How much approximately costs those equipment, including the cost for a reliable mechanic to fix them?
Do you by chance have any tips to make a 4 stroke 50cc faster or would some of these tips work the same
You should do a build series on a Honda spree. They don’t have a big aftermarket selection what brand makes pipes for them?
the scooter shop i put in description sells pipes for them!
Me seeing the thumbnail: I understood that reference.
Yo my stock 50cc yamaha bws will barely idle but dies as soon as i even touch the throttle. Every part is new, good compression spark, everything. Got any tips on tuning the carb so i can get it to run?
I have a Roma superhornet 150 that was doing the same thing. I'm not a tinkerer myself so I just paid to have the carb cleaned and tuned. Works just fine now
I wanna see you get into a 4 stroke zuma and see what you pull out it.
how rare are the piaggio typhoons in the us? i would love to see a typhoon build if you can. love the scooter contend mate.
near impossible to find , thanks man
Bro this is wild 😂😂, scary and funny to watch, good job bro
Yo need jet drills you could have drilled the smaller jet up. Great vid, thanks my friens.
Awesome channel and videos my man. I have a 2009 eton beamer 3. Can you recommend a variator kit for it. I have a tecnigas exhaust. Just want a little more top end hitting about 38 right now.
In your opinion what is the best used bike to build. Just want to put around the beach
yamaha zuma prebug
For me w kymco super 9 is a good 2 stroke 50 I literally did every mod u could do to it and I got it to go 65 mph 55 up hills
premix definitely is the best way
does taking out the speedometer part make it faster? i know it makes it lighter but does it make it faster?
Good times nicely done 👍
I have a stock yamaha jog r 2015 model that’s doing about 40 mph, and ive just bought a polini high speed variator, how many mph more would i get?
My guy, listen to me, buy a polinj for race exhaust, or even a simple gianelli with an exmpansion chamber, not that thing
Would this work on a 2024 Honda Metropolitan? I just got my 1st scooter 🛵 and i’d like to go 50 on her.
what 50cc 2t scooter should i buy?
where do you buy tuning parts?
link in description
if you have a stock scooter but dont want to spend money take out all restrictors!!!!
How do I restrict the cdi on my blaze2....I need desperately to be able to go on highway
It's a 150cc and won't go over45..............😢
@@jamiediseker9232 you can buy a derestricted/ racing cdi online search your brand and model + cdi and then you will see Some. I dont recomend going on the highway
those nike flip flops , also reduce weight by 0.7%
I think I will also buy myself another 50cc , much more fun than an expensive heavy motorcycle
How much 2 join. Need help. Head & dash light is out (2024 cougar solana scooter) all other lights work
first time seeing your vid... great! Man I sub instantly, and as + you live in the GTA SA street :o
Time to dive into my zuma
I know this probably don’t matter to you but can you do a Gy6 150cc build to make fast I have a 150 and would love to see what yu can point out to do
Used to find em and Fix em and re sale em before u want more power ? More air and gas u get into a motor the more power u make ..
the variator only changed topspeed for me and when i put lighter rolls in it didnt accelarate like it used to
Will these same upgrades work for the Ruckus?
Motivate me to put upgrades on the Scooter? I just brought a Brand spanking New Suzuki V-strom, the scooters going to have to beg for attention... actually no, it needs to come apart to get some new rear wheel bearings, some plastic repairs, the restrictor was taken out very quickly, the exhaust may get changed. and I think I may have some jets to try. But the Main focus at this point is putting a Top box, Panyards and maybe some better foot pegs on the V-Strom
a pgo hot 50 hits about 46mph just with takeing the vario restrickter and intake restrickter
Sweeeet 👍🏾 thanks 👊🏾
You really should come to sweden/finland almost every 15/16 year old has an moped
I could use that for door dash 😂 nice
Would this work on a ruckus ?👉🏼👈🏼
So i scored a elite 50 sr i know thats the unrestricted US model . With there being so many damn options you can do with af16e and all the af18 parts from japan and overseas . You think a variator is even worth it gains wise . My thought is keep it stock until it needs a top end . Thinkin yellow contra , variators and rollers maybe a fresh clutch. Just not sure which variator readup the polini and malossi seem to be the go to and some say kelly . BUT overseas it seems alot of the dio af18 guys run TWH brand parts . What ya think ? Also noticed theres a couple different size variators for the af16/af18 which and why ? Im all ears on this
Man I want to get in on this scoot modifying so bad but I'm having trouble finding parts for my people 50 2t 😢
Your neighbors must love you
i honestly think 2 stroke scooters should come stock with a 70cc kit, because even if this honda is way better it still lacks torque
Would changing the gear set increase MPH & keeping it 50cc?
yes but it would take you a lot longer to reach speed and takeoff will be rough with just 50cc
Not worth it on a 50, the engine would barely be able to rev up
High speed is the shit 👌👌
can you just remove the variator limiter plate?
what kind of rollers did you put on it the second time? i am going to do the same with my scooter and thougth about 5.0 gram rollers but mby thats to ligth?
i ended up with all 6.5g
got the same scooter but its 2008 and its a 100cc but ive heard those are not bad
You think i can do all this on a Honda Motocompo??
I have a 90 cc one will this will work
Any european can give all the information you ever need to make it as fast as you want we use skipper engines with 180cc heads or hexagon engines
he chose the worst exhaust possible, not even an expansion pipe, it's just a less shittier version than the original one.
bro i need the exact measurements of the drive belt you put on the scooter thanks
just go on scooterswapshop and go under the scooter you need !
will this work on a x22GT?
Motivates me to try and modify? In still trying to get one to modify😭
Mine did 74 km/h on a stock 50cc with a malossi variator kit and a technigas pipe, I crashed it unfortunately.
It’s always a good Sunday when Trev drops 🤌🏽
💪🤙
I have a gy6 50cc 4 stroke and i need help to make it reach 45-50mph does anyone have any tips please
What's the best website to buy a moped and have it delivered to home ?
@@TuaoiVaovasa i don’t think that’s possible unless it’s a china bike from temu hahah
@@MOPBOYZ I want to get one I don't know where to start?