I Doubled the Power of my Scooter! Phantom F12 70cc
HTML-код
- Опубликовано: 22 авг 2024
- THE F12 FIRST RIDE........INSANE!!!!
After rebuilding my Malaguti phantom f12 and going to a water cooled conversion, I finally got to put my Stage 6 70cc MK2 Racing engine to the test!
Inner rotor ignition is a game changer!
-
MOPBOYZ MERCH & GEAR. : www.mopboyz.com/
-
NEED SCOOTER PARTS? USE CODE "MOPBOYZ" & SAVE 5%. CLICK HERE:
scooterswapsho... Авто/Мото
F12 is a certified ripper😍! Small side notes:
The bog from the start might be the shimming, belt not going it's full travel. Or it would prefer 4-4.2gram rollers.
A lot of new S6 R1200 / R1400 / R/T MK2 exhausts leak from the silencer. In Europe we just put gasket maker on it, let it cure for a couple hours and go full throttle. Sounds a bit ghetto but it works.
Waiting on that disc brake conversion!!
love waking up to a mopboyz vid
my dude🤝
@MOPBOYZ awesome video check out my isinwheel s9max electric scooter that's my ride I get around town on
@@MOPBOYZwhat's good, love the content, I got a trail master Milano 50cc love to see what can be done with that, appreciate it🤘
When the wind slows you down faster than the brake 🤣🤣❤️🇬🇧
lose the stage six exhaust get an yasuni c21 ! , carb air screw 1 1/2 turn. try and get full malossi overrange. if you want to go full wheely mode get and polini speed control vario. nice bike you have there! i owned 2 my self.
Nah full stage 6 is better
What a ripper such a nice bike can't wait to see it dialed in 100%
My silencer flew off my stage 6 pipe on the road back when I had my stage 6 bike with a sports cylinder. That bike would do 60mph easily. I blew up that cylinder from bad squish clearance. piston was hitting the head. I parted out that bike after that. I have a ruckus clone bike now, with a 100cc stock engine and a v8 pipe. other than that stock. It does about 55mph no problem. I am much happier with the speed vs. $$$ spent considering I had over 1000$ in the first bike, and less than 500$ in this one with less problems. Thanks for the share love the makita battery.
Hey brother, watching from Puerto Rico, I have a F12 LC foggy. I've just finished watching the whole series and you have motivated me to build mine. Haven't even started in years, so wish me luck 😅
It's always a good day with another MOPBOYZ upload
my guy 🤝
new road 100cc
the second tune you made with the stiff contrast spring is actually most of the tunes you can hear in a '' 100cc malossi trofeo '' races , they get all the torque for those sketchy curves in the Magione track , you got that sweet spot with the soft contrast and it really fits on a 70 cc , altough a stiffer one is better from 86 cc and above
that thing rips, good job on the build
Hey man, greeting from Italy. Those things (Yamaha Aerox (GP1) and Yamaha BW’S as well) were all the rage in the 2000s. Some tips, a common mod back in the day was to install a GP1 radiator as well, in order to get usable temps on higher end cylinders. Also, as you already noticed, you should get the rear brake situation sorted out. Idk if you know this, but the Phantom was also sold with a read disk brake, you could try to get the casing with the disc and caliper mounts, as I don’t know if adapting a disc setup was possible with the drum brake casing
The F12 is my fave - love the Foggy rep. My Ludix Blaster runs a very similar rads and header tank set up. For easy bleeding just prop up front wheel and give it a few braaps with the tank cap off. Usually gobbles down another 200-300ml of coolant. Careful running too cold, chance of cold seize. Consider a thermostat 👍 great vid
Good job ! This is a very nice and taste tuning on this scooter . Keep up the good work !
Finally been looking for a banger vid
😤😤
Awesome content keep it up, phantom looks beautiful...
thanks my dude
They rented this particular model down on the strip back in the day,i rented one and ripped around on it.
Neat little scooter for sure.
Love seeing new episodes
I get so excited over these ped build now haha. Love these vids man
The F12 was so popular here in the 90s, awesome machines.
Getting mine 70cc f12 soon 🤩
Been waiting all week for this one to drop its a beast 💪
honey wake up the mopboyz just posted
I need storage bins like that! My garage looks messy on my channel! Smh.
Yess!!! Getting me pumped on sr50 of similar build going rn!
the cap for the reservoir is identical to the one on a stock derbi senda, you can buy them new all over europe.
hes from the states
@@MartZilka he often buys from Oversæt as far as Im concerned
Man that dog rolls. Hold on to her trev.. mop boys forever..old man mop 😊
thanks man🤙
100k bro insane
Damn son, I thought my old F12 that did 120km/h was badass, this is on another level ❤
insane build ! good shit
I live in vegas but I grew up in france and used to own a mbk booster with a malossi MHR 70cc, Malossi MHR exhaust, internal rotor ignition MVT, stage 6 crankshaft, transmission kit overrange MHR and a carburator PWK 26, this thing was flying, I always wanted to try to swap it to liquid with a mbk nitro engine but I grew up and left my scooter behind haha
Love your channel, it makes me wanna buy one again and im 34 yearsold today haha
keep up the good work man !
Just checked out this channel for the first time today, been wanted to build up a scooter to mess around on. Then I saw that EZ90 cub you got, that thing is clean! Been looking for one nothing in my area unfortunately
Great vid bud!!
hey man just noticed after watching this video for the 100th time you are still running af vacuum fuel system. You have to upgrade that to a better "petrol tap" I would suggest the malossi one. because the vacuum system cannot keep up if your riding full throttle for to long and that will result in the bike bugging out and run lean and foul your spark plug or destroy your piston. but a really nice video greetings from Denmark
In the future you could maybe do tuning on an Longjia Firefox 4 stroke😂
Honey wake up mopboyz has posted!!
What a beast, and the wind was wild the otherday.
Great job on that swap! That thing gets it! 👍👍 Maybe you could send that pipe back for a new one. Doesn't seem right to be leaking from the get go. Seeing those fancy rear wheel stands, makes me wonder why manufacturers ever went away from the center stands on bikes. My '67 and '69 Honda Trail 90's both have the center stand, and they are awesome for working on the bike.
Greetings from Philippines with ❤
Been waiting for this video so bad
so cool man. plus that thing sound awsome🔥
thanks dude!
congrats to 100k, yuo should amke some sweet merch, i would 100% buy it
actually i have got an f12 liquid cooled from the factory , i think the frame is a little different because that coolant reservoir actually mounts inside the glove box
I' m from Romania and I love to watch your videos .
Respect man. :-) 😀
From my experiences you don’t wanna warm it up not using the water pump, the point of warming it up is warming it up slow so otherwise it wouldn’t be necessary at all
there is also the opportunity to install the carburetor to the rear. there is a special subframe that makes that possible. looks good when installed. have it also on my aerox and sr50. keep up good work - the ducati version looks awesome.ah and i forgot. i wont reccomend stage6 parts. the exhausts are quiet cheap stuff in quality. we here in germany (home of s6) had alot of those pipes... quality is bad, price is high - i recomend yasuni
Bro, I love these scooters. I’m gonna have to buy one one of these days.
Ripper is Born 💯💯
Love it!
bros consistent with the lunch break uploads
I'm missing a stage 6 subframe. allowing your carburetor to be mounted directly above your rear wheel.greats from Amsterdam the Netherlands
ya boi using motogp racing technigues on a moped with parachuting... Lets see the full chute with the Doctor's dangle on entry next :)
Miss the Durango ymca days man
Never doubt a malaguti scooter they are aswome
So Nice 🔥 Love from Germany
If you go to some where that sell plastic single brick covers 9×4inch think they do them in Aliminum aswell
They will look good instead of holes
there dirt cheap
what they are for is going over the air brick in a house
stops mice getting in
I am jealous of your weather my bike wont start under 70 😊
You should also buy a Yamaha Aerox, also called MBK Nitro. I'd love to see a video of that one.
MOPBOYZ!
I love your Videos best Scooter Channel Out there greetings from Germany
i have an inner rotor kit with no charging, how do you change the wiring so that the lights run off of the 18v battery, would help alot as i have to charge my motorcycle battery every 2 days to keep it fully charged.
Trying to get an f12 or a jog just like yours 🔥
She sounds like a ripper!!!
Sounds Sweet 👽👍🏻
Killer f12 that boi sick🚀
The f12 is even more awesome than before! I wish my Scooter could do atleast 50-60mph. But i don’t think that there are that Many good tuning parts for a Speedfight 2, it’s a french scooter from Peugeot. Does about 43mph on gps without the variator restriction if i’m riding downhill for quite a bit. Can do 34 on gps maybe more on the straights. But it’s broken at the moment, the thread on the crank and the axle Hilding the clutch Bell is gone. I torqued the nuts for the clutch Bell and the belt disc WAY too much with an impact wrench that has WAY too much torque. 800watts and has 331.9 ft-lbs of torque. And a new crank costs 1499SEK which is about 142USD. Expensive stuff.
There are parts for the sf2
@@ynk1011 yeah there are but not many very good parts. I have an air cooled sf2 and the website i order from doesent have many good parts. The best cylinder is a 70cc sport and it’s expensive af in my opinion. I live in Sweden so i don’t know if there are more good parts for it in the U.S or some other country.
i know vegas when i see it LMAO
like til 2000 or somethink you had two stroke feul at the pump in the netherlands (eu)
that’s sick haha!
26pwk is a bit too big on a mk2 r+r1200 set 24pwk would be a bit bettwe
"No leaks boys!" starts pouring and instantly starts leaking.... Bro this things gotta be the fastest 2smoke of it's kind state side!
LMAO
i ride cpi gtr 50 cc 2005 it goes 70 km/gh or 45 under my weight love your content btw
Hoch mit das Rad 👍👍👍👍
What really makes it faster I have a 50cc but it's my only transportation to work and it takes a bit I wanna learn
Sounds really, really good. 👍 👍 👍
you should buy a piaggio skipper 125 and install a 180 kit
HEY SCOOTER FREEEEEAK 🤪IM LOVING THE F12 BUILD ,GREAT TO SEE YOU,VE GONE TO LIQUID COOLING .SURE LOOKS MEAN IN RED & THOSE LIGHTS ARE REAL STRONG .IM BUILDING A F15 FIRE 🔥 FOX 🦊 SO IM PAYING CLOSE ATTENTION.NICE TO SEE YOUR RUNNING A DECENT CASTOR BASED OIL JUST MAKE SURE ITS MIXED WELL IF YOU FILL UP ⬆️ AT THE GAS STATION.DONT WASTE THAT CRISPY ENGINE DADDYO 😊
Radiator small!! but nice project, try to review the rollers too
Shes a beauty, I got rid of my Aerox and got a 2017 runner sp
*You don't even know about Mio Mirza on Tiktok.* 😂
it would be super cool to see you build a Peugeot Speedfight 2 lc. if it is even possible to get one in the US. Greetings from Denmark
In germany all 15 year old Boys Drive 70 cc on scooters
In macedonia 12 year old drive 500cc
My 50cc Scooter wont start anymore so im tryng to fix it and make it a 70cc
You should check your brake cable maybe its squishing its housing
Or if you still want round ones they sell them for letting the loft breath about 80mm round in different colours
I think what might be happening with back break is it's not gripping on drum and your just pulling on it opening so cams roll over try roughing the pad and drum ??
Aye wtf I’m watching this you drove right by my house wtf
i love your videos dude keep it up man and i have a qusten what is the best ubgrade for my zuma
best upgrade is the cvt!
doubled the power(again)😂❤🔥
With rear brake the cable could be stretched? If it is you’ll never get a positive brake feel. Btw the bike is sick!!! Nice work!
has brand new cable , pads & spring
@@MOPBOYZ genuine cable or cheap copy
Please buy a gilera runner bro you would love a 50 and the 172 two strokes they are tuning gold
U rpm need to be arounde 14100 end 14300 dis is the sweet point on dis scooter needle in the carburetor iff u gave the w9 change it to w7 end try it on the top setting if u whant more speed at the top u need to change youre
primary and secondary transmissions malossi has a good range but u need to get the
the longest gears they sell
Trust me i now i have raced dis scooters in italy the malossi championship end we have reached up to 155kmph whit a full high end 70cc ofc we hade a c one
Engine
If you put gas and that oli on 2 t scooter you need Shake it I got zip sp 70cc 2t
of course! always mix
Bro you need to get a gilera runner 125sp (2stroke) an put a Wilkinson racing 183 kit on it I make just over 43 bhp
Have you tried using some Red armor 2 stroke motor oil in your 🛵 scooter? If it's A 2 stroke engine? on your scooter that is in the video you're doing on the that engine build.
I have a 2000 model SYM JET100 Ang I want to upgrade it just to add power as your unit
Trevor it is meant to rev high it ain no dio with polini its a minarelli
She's a ripper🤘
Kerja bagus kawan 👍👍
sick ride bro my ride doesnt even ride lol
dont you ever, ever, ever say its cold! live in damn vegas haha what its only 70 instead of 110
What did you use for your light replacement. Did you only change bulbs or sockets also. I need to for my 2001 F12 LC DD and 2003 f12 LC DD
The back brake issue. Have you tried taking the pivot arm off the splines and adjusting it that way ? MOPBOYZ
yessir !
sounds nice
Why didnt you put the malossi rc1 on the malleguti
Nice!