I enjoyed the riveted jon over the welded jon I once owned.A riveted jon will weigh several hundred pounds less than a welded jon,therefore you can manhandle the riveted jon with ease. I would where a life jacket and use the kill switch.If you hit some underwater deb-re at 25mph you might go sailing.I got caught in a storm once. I wanted to put on my life jacket and remove my boots.That was not possible because I had to keep the bow pointed into the waves and I had to keep my hand on the tiller to do so.That storm front killed about a dozen boaters in 3 states.
Thank you for the preview. I bought a nice running clean 15 hp Evinrude and am matching it with a 14' Alumucraft tomorrow. It's gonna be perfect for the upper Mississippi in MN!
@@BentRodBassin I'm buying a 15 hp: Mercury 2000 (like yours), Evinrude '98 or Yamaha '92 ? what's the best for 12 ft inflatable boat sailing at the sea ? Thanks
Excellent! Perfect for that boat. I have a lowe1440mod v and I have a 1999 merc 9.9hp and a 1987 merc 20hp . Both 2 bangers obviously. I get 21-22mph with the 9.9 and 29-30 mph with the 20hp. Big difference in hole sgot and ability to move a load. With 2 guys and some gear I get 18mph with the 9.9 and 27mph with the 20.
You can't beat an older 2 stroke small outboard for tin boats. Lightweight compared to new 4 strokes and faster holeshots and top speed and great longevity. OMC or Mercury for me and I've had several 9.9 and 15 of both makes on 14 semi v rowboats and a 1440 flat bottom jon boat...I honestly have more fun on them most times than my fiberglass full size bass boat...A whole lot cheaper to own too!
I had a 14ft alumacraft with a 25hp mariner 2 stroke and it went every bit of 50mph. Had to be careful with it tho cause even if you weighted the front end down she could easily get outta control on you. And I'm talking OUTTA CONTROL LOL. I ended up building a casting deck on the front and man that made all the difference in the world
My grandfather is handing me a 2 stoke 15hp merc and I definitely plan on getting a used old aluminum boat I can find cheap. 26mph is the top speed I get on a 20hp 4 stroke on an inflatable.
I love my 87 Mercury 25 hp on a deep Lund 14 . It's all i need to get to the fish . After that the troll motor takes over & sonar. Set the hook.. Thank you very much..
I have a 1987 Evinrude 15 on a v14 Alumicraft. 75# and it’s a great match. What ever you don’t run it a 100/1 premix. Use 50/1 with Tc 3 two stroke oil. The 50/1 does not foul plugs and helps your motor have your a long life. The 15 is same motor as the 9.9 except for a bigger carb and tuned exhaust from the factory.
I notice your motor hardly smokes and that fo a two stroke. What is the mixing ratio you use? I used to have a 196 5.5 HP Johnsson behind a Pioner 10, but that motor was a disaster,
I had the same Boat but I put a Honda 20 on it and it was almost scary wide open . Ran most of the time only half throttle but was nice to have the extra power when i was loaded with duck gear .
I’d love to try my Chrysler 15 HP on a flat bottom Jon boat. 26 mph top speed seems crazy to me! I top out at 19 mph on a soft inflatable 10.8 ft boat by myself and can cruise 15-17 mph with 2-3 people. Maybe my motor isn’t made to go that fast. Or maybe my boat has too much drag.
I had a 1436 with a 25hp i would top out right at 30 with 2 people in the boat i liked it for river and creek fishing but i got brave and put a 40hp merc. on it top speed was not that much more right around 35 mph but the ride was so much better even in a little 1 to 2 foot chop it had tilt and trim with a side console and it was a awesome little fishing boat im wanting to do one again just because it was so fun and easy to move over a low sand bar or log to get to fish that other big boats could not get to
27 miles an hour is pretty nice. You Have a good set-up for having fun and doing some fishing. I have a 15 horse 2-stroke Mercury that I'm about to put on an 8 foot dingy. That's going to be a squirrely thing. But it might be fun. Any advice?
I also have a 50hp on a 14 ft RIB Zodiac. Insta: @Markymark.apa for pics. Going to make a RUclips channel myself soon. Gearing up more first. Need recommendations for a go pro or other chest mounted camera options that are relatively low budget but good enough quality.
Plenty fast. I had a 79 20 hp merc on 1436 and it would porpoise and get a little squirrelly by myself. That’s the perfect set up. Nice job, do you mind me asking what you paid for the merc?
Cool vid many are the gearheads that think 20 is better than 15 but the extra weight often cancels out the benefit and lowering the aft makes the boat plow rather than flat plane. you may ger five mph more with the 20 perhaps not and that's not even considering the full economy. I like smaller and lighter... short shaft is better and a jack plate will let you surface prop wee!
I'm trying to fix up a 1980 25 evinrude on a 14" with no battery no excess weight except a 6 gallon gas tank so about 36 pounds. I have a feeling it will haul
I have a 1232 jon boat I had a 1975 7.5 merc on it. Went 18mph with just me in it and it went 8mph with me and my 300+ lb friend on it. I now have a 1989 merc 9.9 on it and it goes 25mph with just me and about 18mph with me and my 300+ lb friend on it. I weigh 165 lbs. So with 465 lbs of people it goes 18mph.
I watched a video of a guy a couple days ago that had a 90hp on a 15'42" flat bottom, had a jack plate. I cant even imagine. I have a 15hp on a 14'36" just like this video, love that thing.
I have a 98 1648 sea nymph with a 15 hp 1974 v twin that runs 23 to 29 mph depending on the current and wind in salt water here on long Island Renalds channel
I have a 15hp yamaha 2 stroke that my grandpa gave me. I'm tryna build my self something that "will kill me", I want to double your speed. Any boat or haul suggestions?
I own a 1985 Mercury 60hp two-stroke that I have owned for about seven years. It seems to me people either love Mercury outboards or they hate them. Have you ever noticed this about Mercury's??
25 or 26 is not shabby at all for 15 hp. Mine does same with 9.5x10 three blade on a 1640 river jon. Stainless prop would be wasting your money. You can buy three aluminum ones for the price of the stainless.
For a 9.3x10 three blade stainless it's 165 bucks for my johnson. Not going to buy it. More horsepower if I gotta go faster and I do. It's a duck hunting thing.
Thats what i was getting in a 12ft with two people good fun on a calm day not so much on a choppy day if you want to keep your balls from slapping the seat 😂😂
Just as a tip, don’t put high octane gas in your outboard because it has ethanol in it. Anytime that you can, put 100% gasoline in it. Ethanol will eat up your fuel line over time. The engine may run better with high octane gas for a time but it will become dependent on it and again could damage fuel lines later on. Great video tho overall. Just bought the same motor
27mph is impressive for a 15hp!!!! I want to go see what my.boat will run, I have a 1448 with a 1987 yamaha 3cylinder 40hp 2 stroke..I know its.fast but never got an actual speed.on it,
Not gunna help UNLESS the heads have been shaved or something to increase compression. If it's not high compression you're wasting the high octane. Just run stock gas.
grate motors my Alumacraft 14/36 has a evenrude 9.9 basickley the 15 tuned down to 10hp and the boat fly's down the river infact i just odored a Suzuki 4hp 4 stroke for using wile cat fishing as the old 2 stroke is way more motor than we need for running trot lines and drop lines ...and the Suzuki 4hp DF4 is a DF6 tuned to simply run at lower rpm than the DF6 so will will have the torque of the 6hp but for $180 less and going threw automartmarine.com i got it shipped direct to my house for $880 but the DF6 would cost $1066 ......and the DF4 will sip fuel and can be used on lakes with clean motor rules ....
Yeah those old and Mercury's are kind of crazy man they're like high output that's awesome for a 15 horse I got a 20 horse 4-stroke Merc on a 1448 and I can only get it to about 25 actually 25 yeah
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
1997 2-Stroke, Short Shaft!
I enjoyed the riveted jon over the welded jon I once owned.A riveted jon will weigh several hundred pounds less than a welded jon,therefore you can manhandle the riveted jon with ease.
I would where a life jacket and use the kill switch.If you hit some underwater deb-re at 25mph you might go sailing.I got caught in a storm once. I wanted to put on my life jacket and remove my boots.That was not possible because I had to keep the bow pointed into the waves and I had to keep my hand on the tiller to do so.That storm front killed about a dozen boaters in 3 states.
I agree. Thanks for watching
I got 32mph with passenger out of my 1995 25hp pushing a 14” Jon boat
That's sweet! Scooting pretty fast!!!
If you can get it buy Ethanol Free gas save some headaches later on since you have a carb.
27mph on an aluminum feels like 50mph. I miss my little boat
It sure does!
Thank you for the preview. I bought a nice running clean 15 hp Evinrude and am matching it with a 14' Alumucraft tomorrow. It's gonna be perfect for the upper Mississippi in MN!
That’s a great setup!
@@BentRodBassin I'm buying a 15 hp: Mercury 2000 (like yours), Evinrude '98 or Yamaha '92 ? what's the best for 12 ft inflatable boat sailing at the sea ? Thanks
Excellent! Perfect for that boat. I have a lowe1440mod v and I have a 1999 merc 9.9hp and a 1987 merc 20hp . Both 2 bangers obviously. I get 21-22mph with the 9.9 and 29-30 mph with the 20hp. Big difference in hole sgot and ability to move a load. With 2 guys and some gear I get 18mph with the 9.9 and 27mph with the 20.
With 2 girls will be better
I think this video sealed the deal for me. 1984 15hp Chrysler. On a 1980 Lowe 1436. Nice video. Exactly what I wanted. I’ll post my results.
Sweet! 🤙🤙
That's cruising! I built a jet jon several years ago and it will do 45 with a fresh wear ring and that's "poop your pants" fast in a rowboat.
You can't beat an older 2 stroke small outboard for tin boats. Lightweight compared to new 4 strokes and faster holeshots and top speed and great longevity. OMC or Mercury for me and I've had several 9.9 and 15 of both makes on 14 semi v rowboats and a 1440 flat bottom jon boat...I honestly have more fun on them most times than my fiberglass full size bass boat...A whole lot cheaper to own too!
Absolutely!!!
I had a 14ft alumacraft with a 25hp mariner 2 stroke and it went every bit of 50mph. Had to be careful with it tho cause even if you weighted the front end down she could easily get outta control on you. And I'm talking OUTTA CONTROL LOL. I ended up building a casting deck on the front and man that made all the difference in the world
* How fast would it go once you took it off of the trailer and put it in the water. Lol.
My grandfather is handing me a 2 stoke 15hp merc and I definitely plan on getting a used old aluminum boat I can find cheap. 26mph is the top speed I get on a 20hp 4 stroke on an inflatable.
I love my 87 Mercury 25 hp on a deep Lund 14 . It's all i need to get to the fish . After that the troll motor takes over & sonar.
Set the hook.. Thank you very much..
I never realized a Jon Would go that fast I'm going to have to try that
I have a 1987 Evinrude 15 on a v14 Alumicraft. 75# and it’s a great match. What ever you don’t run it a 100/1 premix. Use 50/1 with Tc 3 two stroke oil. The 50/1 does not foul plugs and helps your motor have your a long life. The 15 is same motor as the 9.9 except for a bigger carb and tuned exhaust from the factory.
I notice your motor hardly smokes and that fo a two stroke.
What is the mixing ratio you use?
I used to have a 196 5.5 HP Johnsson behind a Pioner 10, but that motor was a disaster,
I had the same Boat but I put a Honda 20 on it and it was almost scary wide open . Ran most of the time only half throttle but was nice to have the extra power when i was loaded with duck gear .
Heck ya! I was thinking a 20 too, with another person on board!
Yeah I would use it for duck hunting too
I’d love to try my Chrysler 15 HP on a flat bottom Jon boat. 26 mph top speed seems crazy to me! I top out at 19 mph on a soft inflatable 10.8 ft boat by myself and can cruise 15-17 mph with 2-3 people. Maybe my motor isn’t made to go that fast. Or maybe my boat has too much drag.
And I got one on a 14' deep-v aluminumcraft, and I love it!
this is what i like about of youtube
I had a 1436 with a 25hp i would top out right at 30 with 2 people in the boat i liked it for river and creek fishing but i got brave and put a 40hp merc. on it top speed was not that much more right around 35 mph but the ride was so much better even in a little 1 to 2 foot chop it had tilt and trim with a side console and it was a awesome little fishing boat im wanting to do one again just because it was so fun and easy to move over a low sand bar or log to get to fish that other big boats could not get to
That's awesome! They are great boats for getting into some skinny water! Now I want a bigger motor! 😁😎
Where do you get it ?
27 miles an hour is pretty nice. You Have a good set-up for having fun and doing some fishing. I have a 15 horse 2-stroke Mercury that I'm about to put on an 8 foot dingy. That's going to be a squirrely thing. But it might be fun. Any advice?
A maybe some weight up front, and definitely have a life vest, that’s a heavy motor, be safe have fun!
I got a boat just like that but it's welded has casting deck and 25hp if you got 27 I gota be hitting 35ish
I got a 12 foot with a25 on it and i get around 35 with it my buddy has a 70 on a 14 foot and idk how fast it goes he won’t run it wide open
I have a 20 hp 2 stroke on a 14' spring Bok I can get about 25-29 mph on the lakes it pretty awsome
I have a 40hp on a 14ft sea craft
@@markamber5011 I bet that rips!!
That's cookin' 🚀
I also have a 50hp on a 14 ft RIB Zodiac.
Insta: @Markymark.apa for pics. Going to make a RUclips channel myself soon. Gearing up more first.
Need recommendations for a go pro or other chest mounted camera options that are relatively low budget but good enough quality.
Sometimes I like Jon boats better than a regular boat because you can get into the smaller areas also that motor actually goes way faster than mine 😂
Heck ya me too, plus I dont worry about bumping trees and gravel!
I have a 15hp Johnson on a 12 ft aluminum boat and that thing FLYS
That little boat rips
I put a 18hp on a 10 ft rowboat once. Was doing 33 before I had to let off. Too sketchy lol
Hahaha, ya man that’s wild!
Got a 12 foot with a 9.8 tohatsu 4 stroke runs 18 to 22mph
27mph is all my jon boat runs. 12ft w/10hp seapro with a 4.5x12 prop. Most 15hp come with that same prop.
nothing sounds better than a small outboard motor in good tune
For sure!!! 🏇🏇
That is scooting right along. That sounds like a setup I would be willing to afford. Good video thanks for sharing.
Plenty fast. I had a 79 20 hp merc on 1436 and it would porpoise and get a little squirrelly by myself. That’s the perfect set up. Nice job, do you mind me asking what you paid for the merc?
Picked up the motor for only $600, seller said it was used once and put away for all these years. It's a great addition to the Jon Boat!
Dammit Man!
Cool vid many are the gearheads that think 20 is better than 15 but the extra weight often cancels out the benefit and lowering the aft makes the boat plow rather than flat plane. you may ger five mph more with the 20 perhaps not and that's not even considering the full economy. I like smaller and lighter... short shaft is better and a jack plate will let you surface prop wee!
I'm trying to fix up a 1980 25 evinrude on a 14" with no battery no excess weight except a 6 gallon gas tank so about 36 pounds. I have a feeling it will haul
Heck ya, I’m sure it will!
Hey novice boater here, would this be able to properly pull a single person tube or disk??
I'm sure it could do some light pulling. Although I wouldnt recommend doing that on a Jon Boat for safety reasons.
Bent Rod Bassin ah ok understood, thanks for the quick response man !
No, it would not pull a tube.
How fast do you think a 12ft Jon boat with a 7.5hp 2 stroke would go
Probably around 15mph
I have a 1232 jon boat I had a 1975 7.5 merc on it.
Went 18mph with just me in it and it went 8mph with me and my 300+ lb friend on it.
I now have a 1989 merc 9.9 on it and it goes 25mph with just me and about 18mph with me and my 300+ lb friend on it. I weigh 165 lbs. So with 465 lbs of people it goes 18mph.
@@JuiceboxJrr. thx
Wanna talk fast put a 70 horse on a 14' flat bottom, I had one with a jack plate on it and it was scary to open it up all the way lol
Oh heck ya!!!!
I watched a video of a guy a couple days ago that had a 90hp on a 15'42" flat bottom, had a jack plate. I cant even imagine. I have a 15hp on a 14'36" just like this video, love that thing.
What speed app are you using?
Just a basic play store app
Man this is so awesome. I am thinking about doing a motor like that on my jon boat. Appreciate you brother.
Do it! It's a blast on the water hahaha
Bent Rod Bassin would a 10 hp and 12 ft be similar it’s an old Volvo penta and a really old Jon boat from 50s or 60s
Go with a 2 stroke Yamaha if you can find one I got one on my flat bottom and does 29mph on gps it’s a blast
Thanks for risking your life for that. I was wondering on one I’m buying
What pitch prop you running?
9
Nice boat, I have a 1648 polar kraft with a 1993 55hp Evinrude that only does 35. My 1996 Johnson 25hp runs around 28 on the same boat
I have a 98 1648 sea nymph with a 15 hp 1974 v twin that runs 23 to 29 mph depending on the current and wind in salt water here on long Island Renalds channel
That's quick....what app r u using ?
It was the GPS Spedo app on the play store 👍
What app are you using to track the speed?
Android GPS speed test
I have a 15hp yamaha 2 stroke that my grandpa gave me. I'm tryna build my self something that "will kill me", I want to double your speed. Any boat or haul suggestions?
A 10 ft riveted jon boat will be a death trap but should be able to hold the 15
What about 8ft lmfao???
@@MountainManKm playing with death😂
@@crankinbass5758 I know. You can come with, if you want, to weigh down the bow. 😂
@@MountainManKm 😂 jeez lol
I own a 1985 Mercury 60hp two-stroke that I have owned for about seven years. It seems to me people either love Mercury outboards or they hate them. Have you ever noticed this about Mercury's??
Also, I failed to mention I have also heard that Mercury's are hard to start.
Loving mine so far!!! My buddy has a Johnson 25, great motor too
@@dbcooper692 had a merc for five years now ,,,starts first time, everytime don't understand the anti hype
1436 jon boat flat bottom with a 1989 2 stroke mercury 9.9 24mph she runs good
This is very impressive I have a 75hp tracker on my 1996 suntracker 18 and it won’t get past 9.3mph.
You need to get a different prop. We have a 75 horse merc on a 24" party barge that runs 17-18
Nice! I get 24 mph with my 1974 alumacraft model f7 14 foot v bottom with a 1987 Evinrude 9.9
That's good I have a 16ft DW with a 25 johnson and it will hit around 25mph
Man how can I get my Yamaha 30 to run like that lol!! I’m getting a max of 27mph. Xpress 1990 15” boat.
Them lowes are thin!
I have a 14Ft Flatbottom Have a 1986 Evinrude 15 motor runs 25.7MPH Does good!
Got a 1993 evinrude 15 on grandpas 14 foot, it does about 26 ish
@@drewarthur2169 I sold My Flatbotton But Now I have a 1988 Kuda Stick Steering With A 2005 15 Hp Johnson 4 stroke runs 29 30 ish!!
Always run manufacturer recommended octane gas. It’s all about the timing
damn impressive, my 14ft duranatic 20hp does 25down wind ha , those jons are super light though
43.2kph is a bloody good effort from the 15👍👍
Mercury made by Tohatsu?.Sounds like Tohatsu.A lot more power than 15.
That thing moves pretty good!!
Nice video
Thank you
I can have some fun on lake with that no need for a speed boat
i have a 1542 alweld with a new 15hp tohatzu 4 stroke. i top out at 25mph
Nice, that's a great speed to cruise around!
The tiny tohatzu motors are not worth buying
Carter Smith they make mercury motors...
I got a 14ft WeldBilt Jon Boat with a 1996 Johnson 15hp with electric start an she does 22mph.
Dude, that's quick!
My 25 mercury 2 stroke on my 1988 14' Grumman Jon does 38 mph
Nice!
25 or 26 is not shabby at all for 15 hp. Mine does same with 9.5x10 three blade on a 1640 river jon. Stainless prop would be wasting your money. You can buy three aluminum ones for the price of the stainless.
I heard those stainless ones were pricey!
For a 9.3x10 three blade stainless it's 165 bucks for my johnson. Not going to buy it.
More horsepower if I gotta go faster and I do. It's a duck hunting thing.
My buddy has a Johnson outboard too, and loves it. I thinks is a 25hp on a 1752
Tohatsu makes great motors. Take care of it and it’ll last a looong time
Perfect boat for speed: long and narrow. The wide boats go slower. No ethanol gas ever. Octane means nothing.
That’s skootin’ right along
It was fun!
Decent engine got one myself
I have a 7.5 mercury and get only 12 miles a hour. V hull 12 foot wide body 52 in. But heck I'm fishing . With 2 people and gear it's a tug boat lol
Haha, it works!
my 05 with charging system gets 26 on a 12 foot mirro craft v best small outboard ever made.
That's sweet! 🏇🚀
What prop do you have? 9”? Then try a 10,5-11” :)
That hauls. Speed tests are always fun.
It sure does!!
Good video. 👍
That’s pretty good.
Thats what i was getting in a 12ft with two people good fun on a calm day not so much on a choppy day if you want to keep your balls from slapping the seat 😂😂
Loooool
14 -36 is the best john unless you need more room for me that's what I would get and that motor is perfect got it sweet.
That is narrow. Will it tip if you pull yourself out of the water on one side or stand to one edge?
@@johncuervo3019 No,No It takes 400Lbs To make water come over the side so no Built Really Well
Just as a tip, don’t put high octane gas in your outboard because it has ethanol in it. Anytime that you can, put 100% gasoline in it. Ethanol will eat up your fuel line over time. The engine may run better with high octane gas for a time but it will become dependent on it and again could damage fuel lines later on. Great video tho overall. Just bought the same motor
That's gotta be nerve wracking, right?
She scoots right along good. I want to convert my 9.9 merc 👍👍
Yessir!
Got sea sick in the first 60 seconds with you flipping that camera around so much
Lol, Rookie.
Cool video 👍
27mph is impressive for a 15hp!!!! I want to go see what my.boat will run, I have a 1448 with a 1987 yamaha 3cylinder 40hp 2 stroke..I know its.fast but never got an actual speed.on it,
I be that would scoot past 30!!
@@BentRodBassin I finally got it all back together and tuned it fairly well. Going to try it out tomorrow and see what it does.
@@justinbryan370 nice! Good luck out there!!!
27mph sounds about right... I have a 2010 9.9 mercury 4 stroke on my 1436 that runs 22-23mph
Add octane booster 93 -> 94!
Not gunna help UNLESS the heads have been shaved or something to increase compression. If it's not high compression you're wasting the high octane. Just run stock gas.
Got a 25horse 2 stroke on mine it runs 30+ all day long it's kinda sketchy but fun Lol
Haha heck ya!
Nice!
Just did this today..14 ft with 15 hp Johnson
Nice! Those are great motors, 2 or 4 stroke?
@@BentRodBassin 2 stroke..think its a 1998 or 1999 model just got it 4 weeks ago
@@bowdiersackett6433 sweet, solid choice! 💯🚀
Nice vid.
27mph. ( 23.46 knots ) ⚓️.
Oh nice!!!! Thanks!
grate motors my Alumacraft 14/36 has a evenrude 9.9 basickley the 15 tuned down to 10hp and the boat fly's down the river infact i just odored a Suzuki 4hp 4 stroke for using wile cat fishing as the old 2 stroke is way more motor than we need for running trot lines and drop lines ...and the Suzuki 4hp DF4 is a DF6 tuned to simply run at lower rpm than the DF6 so will will have the torque of the 6hp but for $180 less and going threw automartmarine.com i got it shipped direct to my house for $880 but the DF6 would cost $1066 ......and the DF4 will sip fuel and can be used on lakes with clean motor rules ....
I got 12ft with 9.9hp gose 20mph maxed
not bad
Wow 27 mph w a15hp even at 24 would be good.
Bye an Aussie skua 11 foot 50 hp
That's moving!
See it plan
99 Merc 15hp long on 1448 Lowe BigJohn with about 575-600 lbs will do about 18mph on smooth water with an 8 pitch 4 blade.
Yeah those old and Mercury's are kind of crazy man they're like high output that's awesome for a 15 horse I got a 20 horse 4-stroke Merc on a 1448 and I can only get it to about 25 actually 25 yeah
25 is still costing pretty fast on these jons!!!
@@BentRodBassin oh you better believe it
I got a 25HP on mine.. i dont think i want to try this...
Wow that’s a lot!! Surprised it doesn’t break the transom with all the weight.
yea i got a 25hp on my 14ft it hauls!!!
Holy smokes!!! 😎🚀🚀
How much did you pay for it?
Its was a smoking deal 😎
That might not be a 9.9
Nice. Since you’re 180lb that makes me 150
Camera puts on 10lbs 😄
I still prefer 2-strokes.
Yaaaa buddy!