The CHEAPEST Way to Permanently Fix Peeling Paint!
HTML-код
- Опубликовано: 1 окт 2024
- Welcome to the #1 Video on how to fix your peeling and fading paint on your car. DISCLAIMER: No fancy tools needed to complete this job! In this video we paired up with Paintscratch.com to bring you professional paint packaged up in a easy to use spray can. This guide will take you through the very basic steps of sanding down your faded paint, repairing it and then returning it to the original shine it had when it rolled off the factory line!
TO SUPPORT THE CHANNEL AND PURCHASE MERCH: paintsociety.b...
To share your project or ask questions please join our facebook group: / 440942309941585
Instagram: paint.society
Visit paintscratch.com for any of your paint needs for your car. I recommend at least 1 can of primer per panel, 2 cans of basecoat per panel and 1 can of clearcoat per panel. It is best to have extra because not all colors cover as easy.
Clearcoat: amzn.to/3qlJkmH
Sandpaper:
Faded Paint Job Pak: amzn.to/2Ov1llb
Clearcoat Sanding for buffing Job Pak: amzn.to/2MQ7OXA
Yellow Hand Sanding Block: amzn.to/3sUQtMI
Gray Scuff Pad: amzn.to/3pyzwoW
Buffing:
Buffer: amzn.to/3qEpKmh
CSI Polishing Kit: amzn.to/3rCrSeK
Other Products used in the video:
Kovax Dry Guide Coat: amzn.to/2ZWzyws
Eastwood Guide Coat: amzn.to/3rq6mKs
3M Respirator: amzn.to/3cHjVkq
Paint Suite: amzn.to/3sSs3TL
3M Plastic: amzn.to/2MAdF2B
Automotive 1.5 Tape: amzn.to/2YjKWlo
Wax and Grease Remover: amzn.to/39TsYeK
Water Based Cleaner: amzn.to/3tNbERZ
Tack Rag: amzn.to/3bYWC5g
Bulldog Prep and Clean: amzn.to/3ciS8X3
Seems too hard I’m just gonna torch it for insurance money 😃
Don't forget to pull it out of the garage first👍
I appreciate you doing these "spray can Jobs" because it motivates me to do them. Please do more!
For real tho been talking about rattling my 88 d21 work beast but this is helping even more
I had a crushed wing panel, quoted £300 minimum to get it replaced. Got my own panel for £60 and lets say about £60 on paint, primer, lacquer, tac cloths, sanding pads and rubbing compound. I won't include all the tools haha I had to get a torque wrench, socket set and ratchet, spanners. But those things I needed anyway and will be used for all sorts of things in the future. All sorted, looks great and I learned a lot about the process. It did take a bit of time though. One thing I would recommend to anyone is when sanding, use a sanding sponge as it's more flexible and soft, not the paper which is tougher and has pressure spots. Also, don't give up, learn as you go and adapt what you do.
@@buakawfan333 j
@PutOnTheGlasses thanks good prep talk you just talked me into it 😃
Dunno why, but I prefer these at-home in your own garage paints more than the ones in the big booths with the complex gear. I guess its because I'm more of a DIY guy and seeing this kind of stuff helps me see it from how a professional painter would "attack" a project like this and how they think about it, versus how I would think about it.
And to oeave your car in there for 2 to. 3 weeks, and they may even drive your vehicle huge no no
It came out better than a "professional" job on a vehicle that my insurance covered. The body shop left me with orange peel texture on the paint & took 2 months to get it back to me.
I never really knew much about auto body work i always saw it as a really difficult project that the average joe in his garage could not achieve like a professional paint shop but these videos give me a bit of confidence and makes me want to try it out myself also really satisfying to watch
the thing is , those big booths allows to paint wider, whole car and bigger areas. Way better ventilation and paint dusts extraction. You can't say 'at-home' is better than big booths lol , thats just too immature. When you paint at home, your whole house inside is exposed to the paint dusts as well. If you smell the paint spray, you breath it.
@@MTLJack Did I say it was *better* in any context above?
I said I preferred a vid where a dude who does this day in and day out can look at a project and say "here's how we're going to approach this and get good enough results that can be replicated by DIY'ers at home"
I understand the detriments of painting at home, I've done it five times now on entire vehicles, and several other times on smaller parts.
This is exactly the video I needed! The cab of my S10 is 50% peeling clearcoat. I'm happy to see a DIY process that could make it more presentable! Fantastic job as always!
Thanks !!
Really loving this home series. These tutorials are so helpful and realistic. Great job buddy as always! 👍
Can I ask a question? You mentioned that you didn't want to spray over the areas that still had good paint, and I noticed you kept true to that with the primer. It was a little harder to see with the base coat footage. Did you end up spraying the entire panel with the base coat, or did you leave some spots untouched? Same question for the clear…
Yes! I have the same question after watching the base coat portion a few times. Brian, please provide us some clarification if you don’t mind. Thanks!
Can you spray primer over the clear coat that has been sanded to 800 grit?
Brian you're an absolute gem mate, one of the best Pro/Diy paint guys on RUclips. Fantastic Channel!
Your an excellent teacher Brian! You clearly explain each step of the process. Keep the videos coming!
Dad?
AMEN!
I am still amazed at how well the 2k clears flow out, and the gloss/finish is absolutely incredible as a result. Imagine, out of a rattle can.
I've been using it on a 91 F-150 that I'm working on and it's legit. I'll never use another clear coat.
@@docz3ro231 what kind of respirator do you use?
@@Aikaramba12 come on man
Looked good enough to me that I would consider doing a whole car.
I recency did our outdoor patio furniture was so surprised it came out so well. Love spray painting have been doing for years but the new products are the best, less problems then the older sprays. .
Wish I had homies like this dude! As always great work. No one even comes close and with spray cans. Totally doing this.
To get yourself fit with Paint Society gear so you can look good whole painting head over to:
paintsociety.bigcartel.com/
“Your hands are your best friends” - this man ain’t never tell a lie
Especially when you're a single man
Daaaaamn, see I love it when you show off your rattle can skills because I connect with you as a DIY'er. Money has been a bit tight because of COVID and all, so I can't go out and get a paint gun, water filters, and a proper compressor. But when you do videos like this, I am floored at the amazing end product. Thank you so much for this video. Absolutely gorgeous.
4:06 "...and you hands are you best friend" *sobbs* Yeah, I know 8(
I might be a girl, but after watching some of your videos, I KNOW I can do this! I'm excited to take on this on my car with just a few areas of needed repair to preserve. Thank you so much!
Men have nothing on women in most things - you can surely do this!
"Don't overthink it, it's just paint!" Those words alone give me the confidence to try something like this. Thank you, sir.
Thank you for making these videos. Ive been able to make my cheap honda civic look so much better on a tight budget and boosted my confidence doing body work
wow... great job with that clear coat. I painted my whole car in my garage with cans as well. Great video.
How'd it turn out?
When's that back window tint getting sorted out? Awesome work loving the progress
Lol was thinking the same great paint/repiar job and that's the only thing taking away from it looking super clean.
I can't tell you how much I love watching your videos over and over and over and over.Great Rattle can finish!!
Hi so I followed your steps in this video and my diy paint I did came out really really good! I did the whole driver side of my car similar to your video the driver side door,rear door and the upper pillar down to the rear quarter panel. I used about 2 full cans of 2k spray max clear coat. Today I looked at it and it looks really good and shiny some spots have no orange peel and really smooth and some spots on the doors have some orange peel and texture. I think I put a good 3 or 4 layers of clear coat with the 2 full cans I’m not exactly sure but it looks even all around. What should I do next to make it less orange Peely and more smoother and no texture? Should I dry sand it like you did with 2k grit then re spray with more 2k clear? I’m a little afraid of using the buffer on it I don’t wanna risk taking off a lot of clear coat material…..the csi Compound you used is a cut and polish solution all in one? I just want to avoid cutting too much. Also how many days should I wait before sanding and trying to cut and polish ?
Fantastic results as always from you Brian. You explain everything so well with your knowledgeable experience. Only through your expert advice was I prepared to even consider attempting to respraying parts of my car with metallic paint, covering previous owners respraying shrinkage marks. I’m well pleased with my results now. Thanks a million!
you look like the guy from Impractical Jokers
Garrand thumb. With the lab coat
Dude I did 2 years learning panel beating in college. They do not include painting in UK in these courses it's one or the other. Your videos are insanely good very detailed if lecturers could teach only half as good as you do on here there would be much better techs out there. One video I would love to see is painting outdoors a lot of people myself included don't have a unit or a garage big enough to paint in. So it comes down to picking your day carefully or using pop up shelter. Great video dude
This is also my problem , not having a garage or anywhere to Mimic a “paint booth”. My only option is doing it on a day when there’s hardly any wind. Lol.
Hi, did you paint over the old paint on the middle of the door?? Without priming it?? I believe you just used k600 or k800 to remove the clear coat on that old paint spot??
I am trying to learn, I have never painted a door or a bumper but I will soon. thanks
The Problem with theses repairs is now the repaired panel accentuates the rest of the cars blemishes!
As a used car dealer you've helped me so much getting ish done. Thank you !
Awesome!
Brian that car looks so good and it’s just the sort of job I would tackle for my kids and their family cars. I’ve been doing little repair jobs on family cars for 40 years now but I’ve learnt so much more in the last few years following you! Thank you buddy!
learned a lot from you sir...thank you so much...watching from philippines...
Please make a video for beginners who plan to paint their cars in their garage one or two times with lower budget materials and equipment. For example, how to manage painting a whole car with a smaller compressor (8-21 gallons), using a LVLP gun, sanding materials and etc that are affordable and maybe could be bought locally or at a big box store. This is more realistic for those who have nothing and will go out to buy things to paint their cars once or a couple times only without a big investement. I appreciate the videos but some of them for example using a cheap gun but the compressor used is professional or beginners guide video but done at a painting booth using a pro gun or painting at home garage but using a dedicated expensive turbine paint sprayer ($1400+). Just an idea but your videos are very helpful. Thanks!
Today I learned: you can unclog paper with a brush
I've been using cans of keyboard duster. LuLz
A sponge works well, too!
You are a joy to watch,your step by step video is amazing.
I'm in Canada and I was looking for the "BULL DOG PREP AND CLEAN " and it is not sold here.Is there anything else that I could use.
Thanx Your AWESOME
Great video. But please..you talk too much. If you watch your video with no sound it makes just as much sense.
The filming is great, a few captions about the tools and techniques and it would embaress any car tv show.
More please. Ive subscribed. 👍👍👍
Incredibly concise and detailed video. I'm stocked up on elbow grease. The car is next. Thank you! (Oh, and subbed).
Question, do we have to wait 30 days to wash the car after the whole process?
AWESOME tutorial. The civic needs a fuuullll paint correction
This is just the start of this civic. I have huge plans for it 😊
@@PaintSociety subbed for the wait
How long did the Whole process take.?
Wow awesome job bro with spray can I learned something new today thanks for sharing
Great Video! 2 questions. Have a black car which has bad clear with scratches in one area but the rest of the paint is good clear. Do I sand the prime only the bad clear? Or do I sand down the bad clear, prime it, 600-800 sand the rest of the panel and then what? Prime the rest of the good clear too or just base coat it after 600-800 sand? Also, I heard using duplicolor and spary max is bad because it will lift the paint becuase of laquer and urethane. Will eastwood be ok with duplicolor? Thanks again Brian for all that you do.
Thank you thank you thank you! Great info! I bought an e36 bmw that’s in pretty good shape but the clear coat is peeling and I’ve got some rust in a few spots. I’m gonna go for some paint repair using what I’m learning in your videos.
just did this on my 2007 Acura TL Type-S in Kinetic Blue pearl. My rear bumpers clear coat was so shot. Looks brand new! Paint Scratch got a perfect color match
Mark Ruffalo is a great actor, and painter apparently!😮
Great video Brian! I'm impressed with how well the clear laid down out of an Aerosol can.
Prep work. Prep work. Prep work.
How do I Sand spider webbing on tinder and paint lifting off finder
This is so far the best rattle can lowdowns I've seen. Thanks much!
2 question topics for you and/or anyone with an opinion reading this:
1. I'm painting a small car (currently dark green) via rattle cans, because I'm cheap that way and proud of it! 😆 If I'm using the same brand (and paint type) of primer and color coat (in my case it's Rust-Oleum semi-gloss black paint+Primer 2X, and gloss Hammered Black), is it better to allow the primer to dry for 24 hours, sand/clean, and then spray the 3 color coats? Or, is it better to spray the 2 coats primer, let it dry for 30 to 45 minutes, and then start the 3 color coats? What's best for bonding and/or drying of all layers so it doesnt take too long to evaporate VOCs and dry? I'm planning to let the car sit in an open carport for 3 full days (to dry) before driving again. We have about 20% humidity at most, and 75F degree temperature days at present.
2. Since 2018, in Colorado USA, I've noticed spray paint in hardware stores has increased price 100% (at minimum), when it's in stock at all. Is it the same for you? How about the professional brands and paints for booth use?
Do you think the stores are keeping this profit, or the manufacturers, or the oil industry? Or maybe they're all so comfortable together in business it's like one big entity? 😆
Fuel is 150% higher than 2 years ago, for us in Colorado, so I'm personally interested how all things made of oil, or supported by oil-based transportation (diesel trucking), prices' are affected in the global economies. Thanks much!
Where can I buy the elbow grease
love these videos! Using your techniques just did my 2014 Porsche bumper cover in Guards Red (easy solid color) bumper with 3 cans of base and 3 cans of 2k clear, looks perfect. Granted I already own a rotary buffer, DA polisher, and years of 3M sandpaper. Doesn't have to be a beater to use these techniques.
That's honestly such a close colour match! I almost can't believe that wasn't blended! With a cut and polish on the rest of the car (maybe a flowcoat on the rear bumpter) that civic can look brand new
Is it just me or did he just do one side with 3 cans of paint and clear and primer so u need 6 to do one side and more for the hood and roof and trunk lid so u are spending at least $500 and why could you feather the paint the to stock paint?
Painting this good and looking this good... 👌 I like it. Your gonna like the way you look... paint society guarantee.
Can you paint my car for your channel? . . . Please
You got me motivated do fix my wife’s car
New sub here, great channel so far, quick question, my black GM clearcoat has not peeled back like on this vid but has hazed over badly on all flat surfaces hit by the sun, (live in FL), any suggestions as to restore it?, thanks in advance.
I was going through your other videos and I really like the gti pro lite and wanted to know what is the price on it where should i buy from thanks.
Can you not just sand off old clear and put on new?
What about sealing the primer with cans? Skip that step?
Brian could paint a dog turd and it would look fantastic. Guy has some talent.
Awesome! Now you totally have to buff the rest of the car to match that new paint shine!. Great problem to have!
I’ve never used that brand of paint but when you were spraying the clear it looked like it had a good spray pattern and really good volume
Thanks for dropping all of the paint knowledge. Greatly appreciated
Awesomeness
Great job Brian. Your videos motivate me to do it myself👌
I use something called a can gun 1 it clips onto the top of the spray can turning it into a spray gun brilliant thing only about $6
🙏Thank you SO SO much 🙏. I bought a car with heat fried hood & roof not realizing how much ‘getting it repainted’ would cost 💰😱! I’m eternally grateful to you for posting this brilliantly presented information which is a godsend to this single mom working three jobs 🙏
After following your videos on spray cans I fixed up the back of my classic mini..I must say I am extremely happy with the result..no orange peel and a great shine....makes me want to do the rest of the car....who says you can't get a good job with spray cans...
Awesome news!!
So I have a question, the paint is peeling on the roof of my car, so therefore I need to sand it down to bare metal, what are the steps prime and paint?
Brian is a PhD in painting. He is a super good guy. He is a great teacher as well. Thanks Brian for all you do. I get the feeling that had he not chosen painting, he would have been a philanthropist/ professor ! Have a blessed day Brian !!👍👍
when do you recommend covering the door handles and side trim? looks like they got 5 coats of paint now.
Great video I watch everything you produce I do have a question how many cans of base and how many cans of clear did you use on this thank you
Thanks for the excellent explanations
Mr.Brian. 👌But Where's my video on explaining different kind of primers. ?🙄
Great video Brian been watching your videos before i attempt front bumper respray one question clear coat spray can in my local auto shop are labeled 2k but are not a 2 part mix with plunger under can are they good to be used or should i go to a pro paint shop to buy plunger type can any advice would be appreciated thanks mate stay safe cheers
Thanks for the informative video Brian! Always helpful and encouraging!
I hope you will have additional turbine sprayer videos. Especially tips re Fuji gun tip size, setup, and techniques. I have a Fuji 4 stage. Great system but find that Fuji Spray is lacking in automotive related info.
Thanks again!
WOW what a difference with just rattle cans. Been watching a number of your video's in prep for doing some paint & clear touch ups on my daughters red Alfa Mito. Keep up the good work. subbed from England :-)
Sweet. Always learn so much as a sub to your channel. Thx for taking the time to teach us. Looks great for low budget.👍
I don’t have a garage. Can I do this outside?
I have the same question.
So what’s happen if my paint is stil in but not as shiny and lightly fading not bad but it’s a 2004 Honda accord and I want it to look new
Using such cheap materials I would just do the whole car so all the panels match, will get the money back at resale.
Im just looking for info abouts, an existing paint job on a 55 chevy my dad had painted years back. One corner is starting to fade. 😮 A quick sand buff and clear to protect that affected area.
Just a question on the final clear coat at 16:00. Seems to be laying on real thick. How do you do this without it dripping?
Just watch the clear go on and make sure it’s nice and smooth.
@@PaintSociety Alright, thanks!
Your video is still helping people 3 years later! Great teacher..me as a student not so much. Would love a follow up on how to fix things like uneven basecoats and rough appearances. 🙃 Totally messed up and clear coated over it…and now I get to look at it under a protective layer..smh..beginner mistakes for sure.
Wait for it to completely dry and do the same process again. The clear coat is the same chemically as what originally came on the car. Only difference is age it has been on. Put atleast three coats of color on .
Sometimes even when you have access to air compressor air spray gun for small jobs just easier to take spray can! Great results!
Great videos man! i am trying to do some repairs on y car and the paint is metallic black. It is BMW Sapphire black and I am wondering if the primer needs to be black or if it can be gray and will it make a difference?
Great job and very well detailed video. Excellent job.
Wish I could hire you to do the clear coat on my 2008 335XI Dual Turbo White BMW!!!
I'm having trouble selling it (even though it only has 78K original miles on it) because the clear coat on the hood is peeling and it's not making it easy to sell even at a reduced price. A drag for sure.
All the best from the Jersey Shore.
Phil
Thank u for the video buddy. Cuz I need to paint my hood of my car.
Awesome 👏 job Brian you really hit the nail on the head with that video and that trigger finger off yours is amazing 😉 boy o boy what a finger You don’t need a paint gun to make it shine Brian lol 😂 keep it up much love and respect ✊👍👍👍👍👍👍👍👍👍👍👊👊👊👊👊👊👊👊🙏🙏🙏🙏👌👌👌👌👌🔥🔥🔥🔥🔥✨✨✨✨✨✨✨✨✨✨✨✊✊✊✊✊✊👏👏👏👏👏👏😉😉😉😉😉😉😉💯💯💯💯💯💯💯💯💯💯💯
Thanks !!!
😎 You always have the greatest paint videos, no other paint instructional video even remotely approaches you EXTREME TALENT!
Thank you Brian!!
I tried my best. Had lots of areas where my paint flew off my Hyundai in sheets. No matter what I did, I couldn't get rid of the chip line where the flake meets car paint. I'm female and short. I did everything, sand in between... can you believe that when I lifted a piece of the tape, a big piece of paint came off in another area attached to the painters tape. Unbelievable. I'm going to finish with poly. This whole ordeal really stinks that Hyundai doesn't back this. I just pray that it doesn't rust. Well, back at it! 👍 I'm just grateful to God that in my late 60s, I can still do this crazy stuff. I don't have 7k lying around! Sorry for whining, but these last 2 days have been a nightmare.
$1000 for 2 panels remind me to never go there for paint
You must have some special paint. Mine works out to $156.00 for 2 panels and I have a 1 year only paint code.
Just wanted to say I've learned a lot from your videos thank you for doing them. I have 30 years experience painting homes but would like to try and repair and paint some pealing clearcoat on my Mitsubishi 3000 which had a mid coat paint on it. Do you have any tips for me. The color is Misty white pearl and I will be using paint from Paint Scratch. I did paint the back spoiler which was I think a PVC plastic and it turned out pretty nice but now I want to give the roof which has only base coat paint left on it and the hood which is flaking not really peeling off. Thanks for any help Mark Battaglia
Good luck with your project and thanks for your comment
OP you are a past master at auto paint and you make it look easy! Meanwhile I know it's not easy, and about as far from "EASY" as anything can get. And I get why the paint shops cost thousands since you are paying for their skills BUT - nobody but an insurance company can afford them. And if you're too old and crippled like some folks (i.e. me) you're pretty much stuck if the only way you could do this is if you had to try and do it yourself.
In summary I wish it were as easy to do as you make it look, and I am a loser with no skills. Also next time please show more of the cat. Thank you
This is the most helpful video for the step-by-step DIY video that I have watched. We only have a hood to do that has lifted clear coat, so this is the video I needed to see.
In order to fix a spot on panel have to paint the whole panel. Is that correct?
You had said you sanded the whole panel. The lower door where there is still a full clear coat, do you just sand it to be smooth? You arent trying to get all the clear coat off there too, I believe .
I want to do what you do
COMFORTABLY
CONFIDENT
I SEE IN MY NEIGHBORHOOD WITH NO INTENTION ON BUYING A NEWER CAR WITH IF NOT WORSER CLEAR COAT FADING CRACK PEELING
SO I GET IT
I WANT TO LEAVE A NOTE ON THEIR CAR HAVING MY PERSONAL NUMBER SAYING
HAY...I CAN FIX THAT
SO WITH THIS VIDEO AND A DESCRIPTION IN DETAIL OF WHAT MATERIALS AND WHERE I CAN PICK UP
KINDLY RESPOND BACK
Years ago I got made fun of, painting my car one panel at a time with spray cans. After about the third panel it started to look like something. Its amazing how much a little bit of shinny paint will change the personality of a rig.
Very nice video! I do have a question, though. Instead of using filler primer on the parts where the clear coat peeled off, can I use sealer primer instead? then, apply basecoat without sanding?
1. did you spray base over base (door handle area was not sanded or primed)?
2. is it a bit overkill to unwrap, wash, spray cleaner, degreaser, tack, rewrap? could you have just spray cleaned while taped up?
3. what were the DA settings?
4. could you have just sprayed clear after sanding and avoid priming? wouldnt clear adhere to the sanded base feathered off?
Not certain about the points made but ,if anyone else wants to learn about painting a car with can spray paint try Sovallo Auto Painting Fixer (just google it ) ? Ive heard some extraordinary things about it and my work buddy got great success with it.
I dunno, just seems like alot of primer/ base coat wasted, I do get the filling concept to a degree, but maybe I missed the purpose all together. just looks like a bunch of unnecessary steps and wasted product/ time, but I'm a amateur, what do I know?
Thank you for creating and posting the video. Im a female learning to detail interiors and exterior the car plus fix the peeling paint on my car on my own. I dont feel like paying 100s just to get my car painted. Im so dam excited. 😂😂🎉 Subscribed and like.
My civic is black and I bought some flat black paint+primer not sure if I should just get regular primer and go over it with that? Or is the paint+ primer good enough?