2008 BMW 550 Cas Module Coding
HTML-код
- Опубликовано: 29 окт 2024
- If you need parts or accessories for your BMW click the link below:
BMW Repair Ista/a Ista/p Access
bmwtechinfo.bm...
BMW Accessories
amzn.to/3HDeBvA
BMW parts info
amzn.to/3qO15xD When you change the cas you must code it
Did u replace the cas module for a use one and then coding
Did you change the CAs module or did you re use the one you had on the vehicle & reset it?
I watch a couple of your videos. Your knowledgeable at what you do. That tool is awesome as well. I need to get one. Do you only service NY?
if you're not far
You know what you are doing!
Hello sr how you turn on the ignition? Im doing rhe same process but when I change the cas ,im not able to turn on the ignition
I have a 2008 BMW 550i crank but no start. Im not sure if I need a new battery everything comes on lights, ac, sunroof etc. no entry sound or chime though. Can you give me some advice or any ideas. Thanks
I can try to give you some general advice on potential causes for a crank-no-start issue in your 2008 BMW 550i. There could be various reasons why your vehicle is not starting, even if the lights, AC, and sunroof are functioning. Some possible reasons include:
Fuel delivery issues: Check the fuel pump, fuel filter, and fuel injectors to ensure that the engine is receiving adequate fuel. A malfunctioning fuel pump or clogged fuel filter can prevent the engine from starting.
Ignition system problems: Inspect the spark plugs, ignition coils, and other ignition system components. If any of these parts are not functioning correctly, the engine may not start.
Faulty starter: A bad starter motor or a worn-out starter solenoid can cause a crank-no-start issue. You might need to replace the starter if it's not functioning properly.
Weak or dead battery: Even though the lights and accessories are working, the battery might still be too weak to crank the engine. Measure the battery's voltage with a multimeter or try jump-starting the vehicle to rule out a weak battery.
Security system issue: Sometimes, issues with the vehicle's security system, such as a malfunctioning immobilizer, can prevent the engine from starting. You may need to consult a professional or your vehicle's manufacturer to diagnose and resolve this problem.
Sensor issues: A faulty crankshaft position sensor or camshaft position sensor can cause a no-start condition, as the engine control module relies on these sensors for proper ignition and fuel injection timing.
These are just a few possible causes of your crank-no-start issue. It's essential to perform proper diagnostics and consult a professional mechanic to identify and resolve the problem accurately.
Super , thanks for video .
So nice of you
Do you use stable power supply while programming ECU or IMMO for BMW and Mercedes? If so, can any recommend good ones ?
yes and its recommended
@@BestCarFixes What power supply do you have if any? I am trying to look for an affordable stable power supply. Thx
thanks for the video....i have some problem with a cas2 in 2004 bmw e61 530d
What happened?
I need you in my area of VA! i have 07 bmw 328i with steering wheel lock light on and i think its because of the CAS.
VA is far but you can get some one near you
Hi , why did you have to do cas coding? What was the problem? Thanks for videos very interesting.
recoding it just to alignment with car functions
best car fixes
what if if change a good used cas3+module from a salvage yard with different vin number also without working key, do i need to program a new key first to open the ignition on to follow the coding procedure?
there a away for that you have to read your cas info and write it back to the used cas
great video
I have you with me on Facebook and Car no crank or start. thanks
if I get used CAS with its key and replaced with the old one, do I need to reprogram it?
you have to program the isn in to the case
@@BestCarFixes what would happen if i dont write the ISN? Would the car still running or i will it get functional problems? And Ramadan Mubarak brother
can this be done using NCSExpert and EDIBIAS and BMW Coding Tool?
I have a 2008 Bmw 550i. The DME is bad ( got water damage ) . I got a used one with the same part number . Can you let me know how to install it and program it to start the car ? I have the Autel Im608 that you are using .
Ok call me when you are ready
Hm is that computer, i want to buy that to code or program cas and keys
If you're replacing the CAS with a new one, does it have to be programmed, or just coded?
yes you must do the coding and programming if it need it
Is it possible to replace cas3 with case,would it work after coding
Yes But you must clone it not coding it
@@BestCarFixes how fast can I contact you,do you have like a WhatsApp line,I have something I need to ask
My 2007 e90 black CAS starts the car but does not lock doors with the remote key. Central locking button works fine inside the car. Wat needs to be done?
check the battery of the remote then the remote it self if it has frequency and remote proxy system
@@BestCarFixes sir i change new computerbox set, and the remote key not working, can i buy your coer or tools
hi brother I have with my bmw x5 2008 engine 4.8. the car won't start at all. can you help you on that problem have Autel 608 if that help. thanks Brother
What code do you have?
@@BestCarFixes 002CEF
present
002CF1
?
present
002D00
?
present
002EBC
?
?
present
002F8A
BMW V20
present
Fault Codes
VCb
Digital Motor Electronics (DME), throttle valve actuator activation
*
Digital Motor Electronics (DME), throttle valve actuator position monitoring
Digital Motor Electronics (DME), throttle valve actuator, closing spring test
Digital Motor Electronics (DME), no BSD (Bit-Serial Data Interface) message from oil condition sensor
Digital Motor Electronics (DME), battery voltage and
00A0C1
Absent
Fault Codes
Vcb
Car Access System (CAS), output, terminal 50
I have a e70 witch is completely dead seem like cas is bad how do I contact u
3472281875
Hi
السلام عليكم ورحمة الله وبركاته
كيف حالك اخي محمد إدريس
عندي bmw E90 2007
عند وضع البصمة بمكانها والضغط لاتفتح الشاشة التشغيل؟ طبعا كانت السيارة تعمل طبيعي وحدث هذا عند اطفائها والكير على وضع N وتم فحص جميع الفيوزات Fuse سليمة
التشخيص بالفيشة كان في CAC والبصمة
Stage 1 out
Stage 2 out
Stage 3 out
هل تحتاج إلى برنامج لل CAC ام توجد طريقة ابسط
السلام عليكم
شكرا كتير على فيدو بس انا عندي مشكل في سيارتي فيك تسعدني بعد اذنك؟
13472281875
Anyway I can contact you to ask a few questions
you welcome
Hi
hi
@@BestCarFixes guten Abend ich würde gerne dass Sie mir helfen bei meinem BMW eine Probleme
Thanks for your interesting video, I have a MINI Cooper and it has starting issue due to the CAS3 module fault. I have some questions to ask, can I call you to chat and get help? please send your number, I appreciate it.
13472281875 what's app