Hey Mad, Crystalsky is not working with my Mavic Air 2, I found a 7" android tablet with high brightness 1000 nit tablet seems to be the perfect companion to fly the Mavic Air 2 tripltek.com . I will love to see a review of this tablet.
Thanks, mate. I just bought one in 2024 because it's one of the few options which will allow me to put a recently acquired DJI Matrice 200 V2 in the air. I couldn't load the app on an iPad or an Android device.
Congrats its a really good device, Make sure you update the firmware, I personally recommend the below for out the box setup, it's important you Update to the latest firmware. 1: After Initial setup factory reset by going into Settings, Backup & Reset, Factory Data Reset then clicking Reset Device. 2: When it reboots reconnect CrystalSky to your wifi network (you will need to put the password in again) then go into Setting, then Update and click Check For Updates, the latest firmware is V02.02.08.01, let it update and reboot. 3:After the update has completed I strongly recommend performing the Factory Data Reset in step 1 again just to set the image back to default then you should be all good.
I have the Mavic2 pro and use the 5.5” crystalsky monitor. The batteries were discharging a few percent the day after fully charging, on the Crystalsky in the GO4 app there is no provision to set discharge time ie: 1 to 10 days, I solved this problem by doing the setup with my iPad Pro. Time will tell if it works, I welcome your comments. Regards, Keith British Columbia Canada
The Osmo multi charger also uses the same plug, though it is not included with that either. At least you can charge the Crystalsky and Osmo off of the same adapter.
Makes for a far more stable platform I find. I have never had an airborne disconnect or crash on my particular CrystalSky, as opposed to loads on 3rd party phones or tablets. Reason? Loads of software competing for access to GPS and Wifi resources on the device, many of which boot up when the phone/ tablet is on. DJI GO 4 is VERY resource hungry, and anything that can and will conflict with it and its connection with the aircraft can be a real problem
Can I use my CS to record my drone videos? Or is it just for playback? This would be done of course after inserting my SD card into my CS instead of my drone.
Great Video! Sorry but how does it works for updates? I mean, now i use my phone with my Mavic and the app is constantly updated, how does it works for the Crystalsky? Are the app on it updated regularly on smartphones or not? Thanks
Originally the App was updated with the whole system image and yes this means its been lagging a few versions behind, DJI have added the facility to update the app as a standalone but they have not triggered this as of yet so will have to see. App updated for CS have been lagging behind because of this.
My Crystal Sky Ultrabright is a nice device, if it were reliable. DJI Go 4 (the latest version for P4P 2.0) crashes about every flight, if the temperature is above 70 degrees outside. I had two flights where it didn't have an application error. The temperature was 59 degrees both nights. I suspect the CS Ultra doesn't have the CPU power to handle Intelligent Flight mode and video downlink a the same time, either. When using IFM, the video downlink is constantly freezing, pixellating, tearing, etc. As soon as I stop IFM, the video becomes clear and fluid Lots of random app hangs, terminations, even reboots occasionally, and somewhat sluggish UI. For instance switching the camera to stills mode is sluggish and usually results in DJI Go 4 not responding errors. $999 is a lot of money for something that I could not trust for flying.
Cool video. It seems the offline map option has changed and when I try and enter a location name for the area it seems impossible to type anything without extra characters being entered into the name. Tried a factory reset but the same. Also rather shocked it still uses Android 5 with very out of date security patches.
Can you make any recommendations on compatible 128GB Micro SD Cards to be used in the CrystalSky? Also please confirm that the largest Micro SD Card that can be used is 128GB.
I tend to always use Sandisk Extreme Cards my self, however tbh I don't use cards that large my self as I have damaged and lost a few over the years so prefer to stick to 32gb cards and have many.
I bought dji mavic air and crystalsky 5.5. My question is why it won't connect from RC usb to crystalsky usb-c? Is there any adjustment? I got connected from RC usb to crystalsky micro usb. please let me know why. ty
Will the Crystal Sky's work with the XT Thermal camera? They are DJI apps. Is it Pre loaded? Does it work with the Z30 camera? Thanks for all the hard work on the reviews. I'm holding out for the 2000 nit, maybe other software...
Scot Lindsay hi it's basically running the public apps so it will support the same products that the Android version of Go and Go4 do, it is a minor revision behind but that's not affecting product usage other than the Spark a minute.
Do you know the polarity of the barrel charge connector? I have a 18v laptop power supply with same size connector and positive center. Not sure if that will work.
could you verify if Dji uses the center pin or center barrel for positive? The dell laptop charger uses the outer barrel for negative and the inner barrel for positive and center pin for data. I just discovered that type of connector has 3 connections.
Great video, thanks! As regards to using a 3rd party power supply to charge the batteries on the supplied charger base, what are the voltage and amp specs needed?
Wow, thanks for the fast reply. Is the charging base 'intelligent' ? In other words, will it prevent over charging? I'm thinking of creating an XT60 to DC jack lead to be able to charge the monitor battery off one of my 4S Lipos when i'm out and about.
Before I drop $ 1,000 on a 7" Crystal Sky monitor I would get the DJI FPV goggles. That's a lot of money for a super bright monitor. I bet other companies in China are coming out with their version of Crystal Sky for $ 200.00. You just need to have patience.
I am not selling DJI products so here is a HONEST REVIEW How about tell everyone that the DJI CS has THREE BIG PROBLEMS? I just got a 7.85" today to find out that: 1- out of the box the compass does not work, the calibration of the compass built in the CS is a joke and do nothing. 2- keep getting "Strong Wirelss Interference" warnings....the CS is the one creating the interferences...I never, ever had this warning with my iPad4 Mini, swicthed back to iPad and got ZERO warnings. 3- it crashes, crashed TWICE and I was not even flying those problems are being reported at DJI Forum all over, DJI have no fix for the problems at present, the fix for the compass they already said will not be firmware...will need to send all CS's back to DJI
Hi Ed, Thanks for you message, At the time of recording these videos I was using Beta firmware, It would be unfair to say something does not work on firmware that was not available to the public. 1: What is correct that yes after the release the compass is still not working correctly, this has been feedback by many including my self, the latest firmware has improved it but its still not perfect although I have been finding it OK actually after a few calibrations, this is an issue that stills needs to be resolved though. 2: On the Wireless interference thing this is a little more complicated, first of all it depends on what craft you are using, the Crystalsky WIFI antennas are located right behind the back panel, this means if your using CS with the antennas vertical they can be very close to the back and yes it appears to pick up something thats triggering the warnings, this however has not actually been affecting the signal its just giving warnings. The fist thing to help this is make sure you turn off Wifi before you fly, secondly try to keep the antennas off the back of Crystalsky, If your using a phantom or Inspire try rotating them 180 so they are pointing down not up, it will make zero difference to the signal performance the antennas pointing up or down as long as they are vertically polarised, Finally you will also notice flying in 5Ghz will not give any warnings, Again this has been noticed and the same as the above stands and its been reported and we hope DJI can improve this. Finally the reason it does not affect your iPhone or iPad is the shel is largely shielding the Wifi signal, the whole back shell is aluminium with the Wifi antennas located behind the glass at the front, this is giving much more separation. 3: Lastly I am not seeing this behaviour my self, If its crashing I strongly suggest making sure its fully updated to the latest firmware then after the update performing a factory reset by going into Backup & Reset, Factory Data Reset then clicking Reset Device. Yes the compass is currently and issue and the wireless interference massage does happen but its depending on craft and setup used, again make sure you turn off the Wifi on CS. Thanks for your message.
Can you please help me with this problem... Crytalsky 5.5 doesn't detect anymore my Wifi address from my router... in Setting / Wi-fi my address doesn't appear all other addresses are ok and works fine, can't find an answer on the Web to resolve this problem, I can't update there is no wi-fi signal..Thanks
This is usually caused by incorrect location settings. , first thing to do is checked the time and Date settings are correct as this can often cause issues. Then try as follows. Turn on the GPS in the Crystalsky and location settings and then leave outside in-view of clear sky for 10 minutes. Then see if it will connect. Have you tried both bands ?
@@MadRC Thanks for your fast response really appreciate...where can I find the Turn on function the GPS in the Crystalsky as you mention..! In the Quick Menu / Wlan, I found my address... but the message is / Not in Range... I am 6 feet from my Router. I have been using Crystalsky for four years without problems...thanks again
Really need your expertise.. I tried to follow your suggestion without success... so I made a factory reset on my Crytalsky and I still can't find my Wi-Fi address, I see everybody else except me. Yesterday Dji Go4 could not open so I use Litchi and it works fine, so I flew for several minutes... so I decided to do a reset factory expecting to solve my problem...but now Go4, Litchi, and Google doesn't work...they can't find my network address... I am an artist, not a developer that is why I need your help...thanks again
BIG PROBLEM!! I just got my new CS 2000 nits and there is a really big problem. Even though I updated the firmware when I try to log into my dji account on the Dji go4 app it's says there is no internet connection. The internet dose work! I can surf the web. Only the log in process is falling. Any ideas?
Do a factor reset on the Crystalsky Device and setup Wifi again, to reset To Reset Go to Settings Select Backup & Reset Select Factory Data Reset Tick the Erase SD Card Option Click Reset Device. Note this will clear Crystalsky of all data including any flight logs or image cache, if you wish to keep your DJI Go logs you would need to sync them with DJI before resetting, to keep any image cache data you can transfer this to an external SD card or USB memory stick before you reset via explorer.
Thats odd, is this 2.4 or 5.8ghz wifi ? I have not experienced any issues that have not been resolved by a reset, you will need to setup Wifi again after resetting, can you try it on a different Wifi just to check its not being blocked.
Thanks. One other thing. I'm interested in using external drives (atomos series for example) with the CS monitor HDMI output...w/advantages like better codecs/better color space/faster bitrates...If you could explore somewhat would be cool.
the unit doesnt charge but if u have it hookup to your controller u can hot swap the battery out and wouldnt loose any screen it stay on just enough for you to swap out the battery.The battery stay charge up to 5 hours
Actually I flew the other day and 5 minutes into my flight my CS went completely black. I landed my Phantom so I could troubleshoot and I realized I forgot to put the battery on the back of the monitor. It was being powered by the RC's battery but surprised I was able to fly as long as I did with no battery on the Crystal Sky.
Are you sure about CrystalSky working with the DJI Spark? I contacted DJI Support on the 9th of Aug 2017 and this is what they told me. Jolina Jolina （Support） 8月9日 CST21:32 Hi there, Thank you for contacting DJI Customer Support! We appreciate you for sending us an email regarding your concern. As of now, DJI Spark is not compatible with Crystal sky. This may be compatible in the future. Below is the list of compatible drone to Crystal Sky. - Mavic Pro - Phantom 4 Series - Phantom 3 Series - Inspire Series - Osmo - Osmo+ - Osmo Pro - Osmo RAW If you have any other questions, please let us know. Regards, Jolina DJI Customer Support, This email and any attachments thereto may contain private, confidential, and privileged material for the sole use of the intended recipient. Any review, copying, or distribution of this email (or any attachments thereto) by others is strictly prohibited. If you are not the intended recipient, please contact the sender immediately and permanently delete the original and any copies of this email and any attachments thereto.
N'th DEGREE AERIAL PERSPECTIVES currently no is my understanding, it is Android so I would not be shocked to see some work around come at some point to be able to get 3rd party apps but again that would not be supported by DJI and as such could affect the warranty.
PLEASE NOTE: Crystalsky now supports limited 3rd party apps, See ruclips.net/video/4G8Fu5Mr-JI/видео.html
Hey Mad, Crystalsky is not working with my Mavic Air 2, I found a 7" android tablet with high brightness 1000 nit tablet seems to be the perfect companion to fly the Mavic Air 2 tripltek.com . I will love to see a review of this tablet.
Thanks, mate. I just bought one in 2024 because it's one of the few options which will allow me to put a recently acquired DJI Matrice 200 V2 in the air. I couldn't load the app on an iPad or an Android device.
got my 7.85 1000 nits came in today with 2 batteries just waiting for the bracket but was messing around with it awsome awsome awsome
Congrats its a really good device, Make sure you update the firmware, I personally recommend the below for out the box setup, it's important you Update to the latest firmware.
1: After Initial setup factory reset by going into Settings, Backup & Reset, Factory Data Reset then clicking Reset Device.
2: When it reboots reconnect CrystalSky to your wifi network (you will need to put the password in again) then go into Setting, then Update and click Check For Updates, the latest firmware is V02.02.08.01, let it update and reboot.
3:After the update has completed I strongly recommend performing the Factory Data Reset in step 1 again just to set the image back to default then you should be all good.
Thanks for the review. You covered a lot of questions on the CrystalSky Monitor.
Thanks :)
I have the Mavic2 pro and use the 5.5” crystalsky monitor. The batteries were discharging a few percent the day after fully charging, on the Crystalsky in the GO4 app there is no provision to set discharge time ie: 1 to 10 days, I solved this problem by doing the setup with my iPad Pro. Time will tell if it works, I welcome your comments. Regards, Keith British Columbia Canada
Also works with Autel EVO and Litchi, 3rd party apps will work with current models after 2018
The Osmo multi charger also uses the same plug, though it is not included with that either. At least you can charge the Crystalsky and Osmo off of the same adapter.
Well done! mad...enjoy your channel, and your overall knowledge of things thx al
I probably don’t have to read the manual having seen this blog. First rate
Thanks that’s very kind.
Great video, very informative.
Looking forward to getting one for myself
RC Tanks & Trucks 24/7 Thanks it is a really good option the CrystalSky 😀
Great video. I'm having video lag that also shows on the video saved on the crystalsky. Not sure if I need a new USB-c cord or what.
Makes for a far more stable platform I find. I have never had an airborne disconnect or crash on my particular CrystalSky, as opposed to loads on 3rd party phones or tablets. Reason? Loads of software competing for access to GPS and Wifi resources on the device, many of which boot up when the phone/ tablet is on. DJI GO 4 is VERY resource hungry, and anything that can and will conflict with it and its connection with the aircraft can be a real problem
Can I use my CS to record my drone videos? Or is it just for playback?
This would be done of course after inserting my SD card into my CS instead of my drone.
Great Video! Sorry but how does it works for updates? I mean, now i use my phone with my Mavic and the app is constantly updated, how does it works for the Crystalsky? Are the app on it updated regularly on smartphones or not? Thanks
Originally the App was updated with the whole system image and yes this means its been lagging a few versions behind, DJI have added the facility to update the app as a standalone but they have not triggered this as of yet so will have to see.
App updated for CS have been lagging behind because of this.
this is 19/8/18 I was going to buy this device today but NOPE . No 3 party aps .Then stick it.
Do you have a link for charger you mentioned ?
My Crystal Sky Ultrabright is a nice device, if it were reliable. DJI Go 4 (the latest version for P4P 2.0) crashes about every flight, if the temperature is above 70 degrees outside. I had two flights where it didn't have an application error. The temperature was 59 degrees both nights.
I suspect the CS Ultra doesn't have the CPU power to handle Intelligent Flight mode and video downlink a the same time, either. When using IFM, the video downlink is constantly freezing, pixellating, tearing, etc. As soon as I stop IFM, the video becomes clear and fluid
Lots of random app hangs, terminations, even reboots occasionally, and somewhat sluggish UI. For instance switching the camera to stills mode is sluggish and usually results in DJI Go 4 not responding errors.
$999 is a lot of money for something that I could not trust for flying.
Cool video. It seems the offline map option has changed and when I try and enter a location name for the area it seems impossible to type anything without extra characters being entered into the name. Tried a factory reset but the same. Also rather shocked it still uses Android 5 with very out of date security patches.
Yea this is a known issue, there should be something coming very soon to resolve this.
Very well done! Many thanks for the info. 👍 ✌
Can you make any recommendations on compatible 128GB Micro SD Cards to be used in the CrystalSky? Also please confirm that the largest Micro SD Card that can be used is 128GB.
I tend to always use Sandisk Extreme Cards my self, however tbh I don't use cards that large my self as I have damaged and lost a few over the years so prefer to stick to 32gb cards and have many.
I bought dji mavic air and crystalsky 5.5. My question is why it won't connect from RC usb to crystalsky usb-c? Is there any adjustment? I got connected from RC usb to crystalsky micro usb. please let me know why. ty
Will the Crystal Sky's work with the XT Thermal camera? They are DJI apps. Is it Pre loaded? Does it work with the Z30 camera? Thanks for all the hard work on the reviews.
I'm holding out for the 2000 nit, maybe other software...
Scot Lindsay hi it's basically running the public apps so it will support the same products that the Android version of Go and Go4 do, it is a minor revision behind but that's not affecting product usage other than the Spark a minute.
Well done, very informative!
"...Won't update homepoint automatically"? I hope not - I might be wanting it to return to Tx
Thanks, very useful information.
Ray Cot Thank You
do you have a ink for the XY charger ?
Sweet!! Your first question answered it all. Keep up the good work.
ISLANDTECH PTX thanks 😀
Well I bought the Mavic 2 Zoom and guess what? The DJI Mavic mount does not fit the Mavic 2 controller! How nice is that?
Yes sadly the Official DJI Mount won’t fit the arms.
Does it work as an external monitor conected via mini HDMI cable with a DSRL? (and a ronin S)
Sadly no
Nice video 👍👍👍
down to earth very easy to und
Thanks
Do you know the polarity of the barrel charge connector? I have a 18v laptop power supply with same size connector and positive center. Not sure if that will work.
It is positive center. Basically yes it will work.
could you verify if Dji uses the center pin or center barrel for positive? The dell laptop charger uses the outer barrel for negative and the inner barrel for positive and center pin for data. I just discovered that type of connector has 3 connections.
Hi, do you have the link for the charger you mentioned getting on Ebay please? Thank you
Great video, thanks! As regards to using a 3rd party power supply to charge the batteries on the supplied charger base, what are the voltage and amp specs needed?
tammovh will work with 3S to 6S output. So 12-26v.
Wow, thanks for the fast reply. Is the charging base 'intelligent' ? In other words, will it prevent over charging? I'm thinking of creating an XT60 to DC jack lead to be able to charge the monitor battery off one of my 4S Lipos when i'm out and about.
Will a DC jack fit the power port?
No its a DJU custom socket.
Before I drop $ 1,000 on a 7" Crystal Sky monitor I would get the DJI FPV goggles.
That's a lot of money for a super bright monitor.
I bet other companies in China are coming out with their version of Crystal Sky for $ 200.00.
You just need to have patience.
see my honest review on top
Why I used crystalsky to my mavic air using usb type C and its not working???
Did you remove the cable from the side of the remote. It must be unplugged.
for the mavic air or pro controller,, what size would you suggest ??
Great video and content - Many thanks
Great info...thanks
Dusty Hi Dusty Thanks 😀
In the settings does it give you the option under applications to uninstall apps like on a normal android device
Hi Shane, No its completely locked down, there is no Play store, Application controls and its locked to signed app installs only.
Note - the CrystalSky v02.06.03.00 installed with DJI Go 4 v4.2.8 does NOT support any offline maps. Weird, unpleasant, but true at the moment.
Good News See latest Video today V02.06.06.00 its back
Does the phantom 4 remote fit in the original phantom case with the crystal sky mount attached to the remote
Yea its no larger on that side of things.
Who makes the custom mount for mavic pro and spark controller to fit the crystalsky monitor?
That is Evolution 3d
I hesitate between 1000 cdm² and 2000 cdm². In your opinion, is 1000 enough under the sun ? do you need a sunshade ?
for most yes but these things are subjective, If you not at all sure I would wait to see both in person
How do you update the firmware on the darn thing, youtube and google searches show no results when searched for...
Firmware is updated via wifi so in settings click Software Update.
Where did you get the mount for Mavic remote?
Pavel Dotsulenko the bracket is from Evolution3D
I am not selling DJI products so here is a HONEST REVIEW
How about tell everyone that the DJI CS has THREE BIG PROBLEMS? I just got a 7.85" today to find out that:
1- out of the box the compass does not work, the calibration of the compass built in the CS is a joke and do nothing.
2- keep getting "Strong Wirelss Interference" warnings....the CS is the one creating the interferences...I never, ever had this warning with my iPad4 Mini, swicthed back to iPad and got ZERO warnings.
3- it crashes, crashed TWICE and I was not even flying
those problems are being reported at DJI Forum all over, DJI have no fix for the problems at present, the fix for the compass they already said will not be firmware...will need to send all CS's back to DJI
Hi Ed, Thanks for you message, At the time of recording these videos I was using Beta firmware, It would be unfair to say something does not work on firmware that was not available to the public.
1: What is correct that yes after the release the compass is still not working correctly, this has been feedback by many including my self, the latest firmware has improved it but its still not perfect although I have been finding it OK actually after a few calibrations, this is an issue that stills needs to be resolved though.
2: On the Wireless interference thing this is a little more complicated, first of all it depends on what craft you are using, the Crystalsky WIFI antennas are located right behind the back panel, this means if your using CS with the antennas vertical they can be very close to the back and yes it appears to pick up something thats triggering the warnings, this however has not actually been affecting the signal its just giving warnings.
The fist thing to help this is make sure you turn off Wifi before you fly, secondly try to keep the antennas off the back of Crystalsky, If your using a phantom or Inspire try rotating them 180 so they are pointing down not up, it will make zero difference to the signal performance the antennas pointing up or down as long as they are vertically polarised, Finally you will also notice flying in 5Ghz will not give any warnings, Again this has been noticed and the same as the above stands and its been reported and we hope DJI can improve this.
Finally the reason it does not affect your iPhone or iPad is the shel is largely shielding the Wifi signal, the whole back shell is aluminium with the Wifi antennas located behind the glass at the front, this is giving much more separation.
3: Lastly I am not seeing this behaviour my self, If its crashing I strongly suggest making sure its fully updated to the latest firmware then after the update performing a factory reset by going into Backup & Reset, Factory Data Reset then clicking Reset Device.
Yes the compass is currently and issue and the wireless interference massage does happen but its depending on craft and setup used, again make sure you turn off the Wifi on CS.
Thanks for your message.
Can you please help me with this problem... Crytalsky 5.5 doesn't detect anymore my Wifi address from my router... in Setting / Wi-fi my address doesn't appear all other addresses are ok and works fine, can't find an answer on the Web to resolve this problem, I can't update there is no wi-fi signal..Thanks
This is usually caused by incorrect location settings. , first thing to do is checked the time and Date settings are correct as this can often cause issues. Then try as follows. Turn on the GPS in the Crystalsky and location settings and then leave outside in-view of clear sky for 10 minutes. Then see if it will connect. Have you tried both bands ?
@@MadRC Thanks for your fast response really appreciate...where can I find the Turn on function the GPS in the Crystalsky as you mention..! In the Quick Menu / Wlan, I found my address... but the message is / Not in Range... I am 6 feet from my Router. I have been using Crystalsky for four years without problems...thanks again
Really need your expertise.. I tried to follow your suggestion without success... so I made a factory reset on my Crytalsky and I still can't find my Wi-Fi address, I see everybody else except me. Yesterday Dji Go4 could not open so I use Litchi and it works fine, so I flew for several minutes... so I decided to do a reset factory expecting to solve my problem...but now Go4, Litchi, and Google doesn't work...they can't find my network address... I am an artist, not a developer that is why I need your help...thanks again
BIG PROBLEM!!
I just got my new CS 2000 nits and there is a really big problem. Even though I updated the firmware when I try to log into my dji account on the Dji go4 app it's says there is no internet connection. The internet dose work! I can surf the web. Only the log in process is falling. Any ideas?
Do a factor reset on the Crystalsky Device and setup Wifi again, to reset
To Reset
Go to Settings
Select Backup & Reset
Select Factory Data Reset
Tick the Erase SD Card Option
Click Reset Device.
Note this will clear Crystalsky of all data including any flight logs or image cache, if you wish to keep your DJI Go logs you would need to sync them with DJI before resetting, to keep any image cache data you can transfer this to an external SD card or USB memory stick before you reset via explorer.
Hi Tnx for the quick reply. I did factory rest. Nothing works :/
Thats odd, is this 2.4 or 5.8ghz wifi ? I have not experienced any issues that have not been resolved by a reset, you will need to setup Wifi again after resetting, can you try it on a different Wifi just to check its not being blocked.
Where can I get the Crystal Sky custom Mount you're using for the mavic Pro in this video
That Is from evolution 3D
With the latest CS firmware update things have changed. Can you do an updated review?
I will try to do this very soon
Thanks. One other thing. I'm interested in using external drives (atomos series for example) with the CS monitor HDMI output...w/advantages like better codecs/better color space/faster bitrates...If you could explore somewhat would be cool.
Very good review!
John Walters Thank You John 😀
John Walters Thank You John 😀
John Walters Thank You John 😀
What size is the barrel pin for charging crystalsky hub ??
Lee Sanders it’s the standard DJI RC connector. This is a proprietary plug unfortunately.
awsome video nice job
can i use it with mavic via wifi? thank you
You Can I show this in my other video before this one at the park :)
how can i get this mount and how much is it?
I am sorry MAD Thank you, CrocEnd
how do you charge the monitor on it's own i don't mean the batteries just the 7.85 unit .
the unit doesnt charge but if u have it hookup to your controller u can hot swap the battery out and wouldnt loose any screen it stay on just enough for you to swap out the battery.The battery stay charge up to 5 hours
Sadly you can not charge the battery in the Crystalsky, you have to use the charging base with either a Phantom 3 or 4, Inspire series adapter.
Actually I flew the other day and 5 minutes into my flight my CS went completely black. I landed my Phantom so I could troubleshoot and I realized I forgot to put the battery on the back of the monitor. It was being powered by the RC's battery but surprised I was able to fly as long as I did with no battery on the Crystal Sky.
can you use it as a monitor from an HDMI source?
Not at the moment the HDMI output only BUT DJI have stated an DHMI and SDI adapter is to come
Not sure a "mirror" image is a good description of what you see on the goggles... "Mirror" suggests back to front... Otherwise a good video!
Thanks for the feedback will absolutely take it onboard.
Can you use it as a monitor for the osmo?
Absolutely anything that used DJI Go can use CrystalSky, DJI are releasing Osmo adapters ver shortly.
And simply cannot charge battery when mounted on monitor.? "Bummer!"
No not on the Crystalsky sadly
Great video. Thanks 👍
907nvl Thanks 😀
Petting it like a puppy 🐶🤪
Are you sure about CrystalSky working with the DJI Spark? I contacted DJI Support on the 9th of Aug 2017 and this is what they told me.
Jolina
Jolina （Support）
8月9日 CST21:32
Hi there,
Thank you for contacting DJI Customer Support!
We appreciate you for sending us an email regarding your concern. As of now, DJI Spark is not compatible with Crystal sky. This may be compatible in the future.
Below is the list of compatible drone to Crystal Sky.
- Mavic Pro
- Phantom 4 Series
- Phantom 3 Series
- Inspire Series
- Osmo
- Osmo+
- Osmo Pro
- Osmo RAW
If you have any other questions, please let us know.
Regards,
Jolina
DJI Customer Support,
This email and any attachments thereto may contain private, confidential, and privileged material for the sole use of the intended recipient. Any review, copying, or distribution of this email (or any attachments thereto) by others is strictly prohibited. If you are not the intended recipient, please contact the sender immediately and permanently delete the original and any copies of this email and any attachments thereto.
Currently officially its no but it works fine in testing with out issue :)
Not P3S compatible !!!!!
Can you jailbreak it?
N'th DEGREE AERIAL PERSPECTIVES currently no is my understanding, it is Android so I would not be shocked to see some work around come at some point to be able to get 3rd party apps but again that would not be supported by DJI and as such could affect the warranty.
I am told there is a hack out there that will allow you to install 3rd party apps...
7
According to DJI, CrystalSky presently is NOT compatible with the MAVIC AIR!
It is now with latest firmware
no hdmi in = no deal :( too bad.
HDMI In is to come via an adapter we have been told :)
Stop touching that thing all the time, dude !
Thanks for the feedback