OCC checks out some new M.2 SSD coolers from be quiet!
HTML-код
- Опубликовано: 8 сен 2024
- Is your SSD getting a little warm? be quiet! has a cooling solution to help keep your SSD temps under control. The MC1 and the MC1 Pro take SSD cooling to the next level. Find out if a little extra air flow makes a difference!
Thank you for your video! I got the MC1 for my 970 Evo Plus 2TB, desktop w/2 fans front & 1 rear. Without cooling, the controller reached 94C with Crystal Mark. With the MC1 it went down to 65, same room temp. Very impressive!!
For the first step of installation which side of the sdd did u have facing up I can’t tell which side should be facing down against the thermal and which side should be facing up?
The side with the factory sticker should be up, it is the side you see after you place the ssd to the base of the MC1@@stevienashville5341
lol 19:22, while you are saying that, there's a screw stuck in the graphic card.
This is great as long as your motherboard doesn't have a heat shield installed already.
Right, you might have to use one or the other.
I was disappointed when i wanted to use my motherboard heatsink. It was designed for a 22110 m2 drive and the head of the screw prevented me to apply it on the drive.
@@thierrybo6304 just move the post dude.
Don't unplug your power supply. Doing so will remove the ground from the motherboard. If you must unplug, run a ground strap from the case to a ground.
The reason the MC1 PRO is taller is because it will allow double sided drives with chips on both sides , amazing video experiment that you have done
Have 2 drives with the mc1 pro on both and never any problems. Well worth the $15.
If you're considering one of these for your PS5, don't get the MC1 Pro version, it won't fit and you can't get the cover back on.
I just did and it fits you just have to put the cover to the holes on one side and just push down the other side with your fingers and then just put the screw and turn it , the cover is flexible and holds well enough.
@@billanten7862 no dont do that if you force it the cover will touch the cooler and it will increase the heat
@@adamsam9332 Durh, the cover already increases the heat, it makes it an oven. Dont use that junk.
Very informative!
This was Thorough. Excellent. Many Thanks.
Very thorough test, thanks for that. Is there a fastener poking out of the cooling fins on the side of your graphics card?
Wow!!! Yes it is! I’ve been looking for that for over a week and couldn’t figure out what happened to it! Thanks so much!
It took me a moment to figure out what you were talking about. Then I looked on the end and, ooooohhhh…
@@overclockersclub Yes like you mentioned in the review: Be careful with fallen fasteners.
@@theovandenberg4682 I’ll make sure to point that out in the next review and give you credit!
thanks a lot for detail review!
Congrats for your detailled test :)
While sandwiching the drive, to set it good on can u slide alittle to line up wont thay harm the stickyness of the cooler? Hope u understand what i say sir.
Thank you for this helpfull video!
Thank you for the info
I seem to have bought the MC1 Pro by mistake did not notice till it was pretty much late to cancel it. I thought I was getting a simple one. Anyways it is a great mistake and this Video which is great has proven me right in choosing. One thing to actually prove is if is going fit good enough since it will be basically under the GPU EVGA RTX Geforce 3070 Ti FTW3 and I will not consider moving GPU to lower PCI-E slot no sir. Will see when arrives this Friday Nov 12, 2022 anyhoot I order 2 M.2 heatsinks one cheaper I will see who makes the cut.
hi , im considering buying the mc1 pro , and i also need it to be under my GPU , wich also covers the ssd , did your heatsink fitted under the gpu?
@@lawyerlawyer1215 Yes it fit just fine with bit room to spare. Hope this helps
Oh also it fit and heatsink is one bigger ones from Be quite MC1 Pro heatsink
@@Uglylizard66 thank you very much , I appreciate it!
I use the mc1 for the ps5
I lost 10 degrees with the MC1 Pro on my B450
Impressive!
I got mine for cheap 2 dollars china brand. Almost the same performance, mine is max temp 51° room temp 27°c.
I tasted multiple times but i came to the most effective one.
Putting thermal pad to the controller chip and leave the nand flash chip vacant and not touching the heat sink.
I actually test that the controller is hotter than the nand flash so i didn't need to put the thermal pad and heat sink on the ssd.
tbh I'm surprised the factory/motherboard heatsink did so well, they make very little effort to increase surface area on those
10:58 & 18:52 why is there a screw in your video card cooler fin? LOL
Yeah - I was looking for that screw. Then someone pointed it out in the comments (scroll down a little). Yep - found it!
Just what I needed, thanks. I want to know how much is the deference between the Bequiet heatsink and stock m.2, cause I want to get one for my PS5. It performed really well.
Eh, cool! :). Are these likely useable with a PCIe adapter card for M.2 drives?
Should be ok but it might depend on what is in the next slot.
Im a liitle bit confused by that screw in your graphics card. The Video was pretty interesting.
Thanks for the vid. Nitpicking abit here, though: if youre using C as temp on the benchmark, why not change it on the ambient thermometer as well(or the other way around?
What's that screw doing in the rear fins of the graphics card? visible at 18:55
very useful video
For the first step of installation which side of the ssd(mine is 980 pro) do u have facing up I can’t tell which side should be facing down against the thermal and which side should be facing up? The side that says 980 pro or the other side of ssd that says Samsung ssd
I have two WD_black SN770 2TB installed in my system. The one connected to the cpu, was using the MB Heatsink, just like the one in the video. But it was reaching 89ºc in the nand, when copying. The other one connected to chipset, is using one from a Chinese manufacture, the cost me 15€, and the max temp is 66ºc. So i bought another one, and the temp changed to 66ºc max, idle is 56ºc. The funny thing, not so funny is that the one connected to the ChipSet is faster than the one connected to the CPU, even that the speed of the bus is the same in both 4x PCIE 4.0, and the GPU is at 16x 4.0.. I don´t understand how, it should be the opposite.
Whats with the screw stuck between graphic card cooler? 😂
Can i put it on a Asrock B550M HDV?.
SSDs like to be warm, but not hot. Don't over cool. If you have a relatively powerful SSD, the factory heatsink is sufficient. If it doesn't come with a heatsink, something like the MC1 is plenty.
Yes, there are users that are constantly moving huge amounts of data and are stressing the SSD for hours. These folk want the best cooling they can get. For the rest of us, including gamers and non-pro video editors, basic cooling is just fine.
If you're a light user or have a moderate SSD, no heatsink needed. Seriously, don't over cool. You'll shorten the life of your SSD.
There are conditions where the SSD is boxed in, with no airflow (e.g. PS5), where anything you can do to give it some cooling is a good thing.
I'm currently looking for a cooler for the SSD on the rear of my motherboard. Space is tight so the more low profile the cooler is the better. Would you be able to tell me the total thickness of the coolers when they are fully assembled with an SSD inside of them? I've been trying to find the dimensions online but can't find anything reliable
If i use one for a second ssd in the m2 slot beneath my graphics card it probably won't fit being so high ye? Like the card will not click in cuz of the height of the ssd with the cooler? Did some1 try that? Guess thats why there's no factory cap there in the second slot.
Edit: i use msi X470 pro carbon motherboard, my 2nd slot is not beneath the gpu but like exactly under it.
Would the BZ003 MC1 Pro M.2 SSD fit in the PS5?
Yes but not the Pro version
Szép teszt GG test nice bro
19:25 talk about loosing parts....there us a screw in your graphic cards heatsink - where it's not supposed to be 🤣🤣
The 1st one was PRO...then the other one should be NOOB🤣
what software you use to test?
Love the video, gave you a thumbs up. As politely as possible, there are ssd coolers like yours that have their own laptop fan. What you have is good but not really a permanent solution
will this mc1 pro fit the mini itx mobo strix z690i?
Спасибо. Интересное сравнение.
Nice video and comparison
Can this be intalled in alaptop? Or it will be too big for space inside?
Not really - I have not seen any laptop where this heatsink would fit.
I see everyone are keeping the sticker on the ssd wouldnt it be better taking it of before installing the cooler?
I read many comments saying the stickers are not only just stickers for warranty, apparently some (most ?) of them do some light heatsink
They aren't normal stickers, they are usually thermally conductive so they can spread heat
In my old desktop when I turned off the PSU the light from the GPU would stay lit for about 25 seconds or so, but with the PSU off, then pushing the on button on the desktop makes the light disappear almost instantly letting me know there shouldn't be any power left in the system.
Can I use a heatsink like the mc1 for the standard ssd in my ps5?
I think so but not the pro
Thank you for your test, it is exatly what i was looking for. Goog luck! Thumb up and subscribe from me!
What is the sizes on this heatsink cooler? L/W/H in mm please.
I am asking because I was wondering if it will fit in the PS5 console.
www.bequiet.com/en/accessories/2252
www.bequiet.com/en/accessories/2251
@@kiemferiway7375 BeQuiet made a post on their RUclips channel stating that the MC1 would be compatible with PS5!
ruclips.net/user/postUgyx6ny0d3QhlMLMX-Z4AaABCQ
Sandwiched
U have a screw stuck in ur GPU heatsink
bequiet = bepricey
Early