Although none of my aquariums exhibit any "green" water I decided to add the UVC Clarifier to a 406 on 100 gallon freshwater that is situated in a brightly lit room. Very easy install and this video helped with the timer functionality. The only suggestion I have is Fluval should consider a separate mounting bracket that the clarifier unit can attach to. This way when the clarifier reaches end of life, a replacement unit can simply attach to the wall/cabinet mount rather than using new screws or reusing the same screw holes which will weaken when unscrewing/rescrewing into them.
I have been avoiding buying one of these as I wasn't sure how the timer worked or how you knew the clarifier was on. You have explained it extremely simply and although I have a Chinese made clarifier bought from Amazon for £25, I am not altogether happy with it so I will now consider buying one of these . Thanks!
no joke. i did a 70% water change. it looked clear. But wasnt. The UV destroyed the clarity. My gf says i have a fish problem, but after seeing how clear my tank was......she described it as looking through glass.. Like the fish dont even seem like there living in water anymore. thats impressive. thank you fluval!!!!!!
Very informative video as always 👍 Will Fluval be making an in-line *heater* anytime soon? There are currently only a few on the market from a couple of no-name brands with mixed reviews. If Fluval made one for a reasonable price, I would buy it in a heartbeat.
I too would like a inline heater for my Fluval 407 and FX6. I have 21 aquariums all running Fluval canister filters. So if you make it you will be receiving my order for 21 units. So please make them.
Just picked up one today, thanks for the video was proper confused with the timer and not much info in the manual. Is it ok to run the UVC clarifier when cycling the tank. Fishless cycle, or will i wait until finished cycling the tank.
We're happy the video was helpful! You can run the UVC Clarifier while cycling the aquarium, but we recommend turning it off for about 24 hours when you add beneficial bacteria to the water / filter. 👍
I installed the device and I it’s running on its day 3 set on continuously, but I see no progress at all. In fact, I cleaned the aquarium before I installed the device and now it seem like the water it’s cloudier instead. I checked the timer and the light it’s green, not red, but do you think the device could be broken, maybe? It doesn’t look like it to me, and the box was perfectly sealed when I bought it. My question: If I uninstall it, take the hoses off and turn it on, would I be able to see the blue light showing out of the holes where the hoses go? I wonder if the bulb it’s broken or defective.
Hi there! It may take longer than a few days to notice a difference in the aquarium. If the light on the timer is green, the CCFL UVC bulb is in good working condition. If you uninstall the unit and turn it on with no hosing attached, in a dark room you will be able to see a faint purple glow!
Hello, I have a 90 liter planted aquarium, there is a Jbl e 701 external filter that turns 700 liters per hour on it. With this product, is this UV filter enough for a planted aquarium?
@@fluval Will Fluval release a UVC in-line clarifier for FX canister filter models & provide a release date? If so, will it be sealed like the one in the video or will Fluval address the issue so users can be able to swap out the bulbs? I have subscribed to you email mailing from your website. Give us something soon for the FX models please! Thank you.
I purchased this and installed this morning. When I initially turned it on the light was green then turned red after about two minutes. I turned off the power and turned on again and the same thing happened with the light turning red after a couple minutes. I tried again and now the light is constantly green but I'm worried its going to break again. Is this normal on a new unit? I thought a red light means the bulb has expired.
Hi there, this model of UVC is not compatible with your FX series. We are currently developing an FX compatible model and will announce and updates regarding it to our social media pages!
Hi Michael, absolutely! The UVC Clarifier will run 24/7 if plugged directly into the power supply, but you can add a normal timer to it for it to run intermittently!
Yes it's unfortunate but its the way uvc is & limitatioms of current plastic materials. The plastic inside degrades after so much light /time it gets brittle /deform
@@Peter12029 That honestly doesn't explain why Koi Pond UVC Filters work fine for multiple years, with only a yearly lamp replacement. I mean if they can develop a unit with a replaceable lamp, then it shouldn't be much more difficult for an Aquarium (Koi Pond UVC Unit)
Does the green light come on only when the light is working, for example if you set if for 8 hrs a day, will the green light only be on for those 8 hrs to let you know it’s doing something or will the green light always be on? Thanks
Hi I have the uvc myself if u got it on for 8 hour day the green light will stay on for that time than go of and back on 8 hours later hopefully that helps 👍🐠
Great looking design can you tell me what is the Wattage of the UV ,there is so many out there with all different wattage from 3w to 50 or higher what's the right one if you want it to kill harmful bacteria ,please advice .
@@fluvalI have a question concerning the wattage. Why is it only 3W, while others for about 300l are more in the ballpark of ~10 to 18W? Thanks in advance!
No, the UVC Clarifier will not have any effect on ammonia. Don't overstock and overfeed your tank, perform regular water changes, and make sure your filtration is adequate!
Hi Joe! The UVC Clarifier will work perfectly with any filter in the 07 Series range, so we'd recommend picking the one that's best suited for your aquarium!
Hi I just got one of uvc I installed today day things looked all good green light on to say it working after a few minutes it go to red and that indicates that the bulb needs to be changed that should not be like that as its 3 days old?
If you are referring to bubbles you see attached to the glass after filling a tank initially with tap water, those are not composed of ammonia but rather nitrogen and oxygen.
The UVC Clarifier is compatible with canister filters with 5/8" / 16mm hosing, such as the 07 and 06 series. A version of the Clarifier compatible with the FX series is in development!
In general, parasites are too large to be effectively terminated by UVC light. To treat parasties, we recommend consulting your local aquatics retailer for assistance.
@@fluval I have both 407 and FX6. I would much prefer this on the FX6. Any updates as to when one can expect for the FX6 and suggested MSRP? And similar to the Fluval 3.0 LED light which I also have...might I suggest Bluetooth connectivity?
The UVC Clarifier helps maintain a clear and healthy aquarium, prevents cloudy and green water by eliminating suspended algae and bacteria, helps keep live plants healthy, and reduces maintenance overall! You can learn more about the Clarifier here: fluvalaquatics.com/us/uvc-in-line-clarifier/
What is the gallons per hour you get when your 406 ( 330 gph) is attached to the uv sterlyzer? Is the dischrge different when on or off? Acording to my research you lose about 75 gph, true?::
Hi! The filter circulation (not the pump output!) of the 406 is 245 GPH, which is the maximum flow capacity of the UVC Clarifier. The UVC Clarifier is compatible with all models of 06 and 07 series filters with negligible loss of performance!
I'm in the UK and Hagen are very selective what they make available. I have to import AquaClear filters from Germany. I asked Hagen and they told me the retailers decided not to stock them. Retailers said they would love to stock them. So don't hold on to your hopes for this or any other Hagen product that is not in the UK or for that matter anywhere else.
The problem with this design is the glass sleeve will gunk up over time and be less effective, and it can’t be maintained or cleaned , so it will probably reduce the function, if this was a replacement bulb and the glass sleeve could be cleaned I would purchase one 🤔
Hi Simon, thanks for your comment! The UVC Clarifier contains a smooth glass sleeve on the inside. Paired with the powerful UV light emitted by the unit, no algae or debris is able to form or stick to its inside walls. That said, the units effectiveness will not diminish over time due to waste/algae or debris build up and is completely maintenance free. Although non replaceable, the UVC Clarifier features a CCFL (Cold Cathode Fluorescent Light) bulb that runs cooler than traditional UVC bulbs to last up to 30,000 hours, running 24/7, which is three times longer than other UV sterilizers on the market. Hope this helps! 😊
Can this replace my aqua 15 W UV sterilizer forget my 80g reef tank? How much is it to replace the bulb and how many watts is the bulb? What’s the best flow rate? Thank you
Hi, yes the UVC clarifier can be used on your aquarium! The clarifier functions effectively in up to 100 US gallons of water. The product comes equipped with a 3watt high-efficiency CCFL bulb. Although non replaceable, due to the bulbs efficiency you can expect to run the product non stop for 3 years. We have found that the best flow rate range is 245 gallons per hour or less.
@@fluval thank you for the thoughtful reply. So I can connected directly to my return line down stream from my return pump, but since my tank is 80 g the minimize flow rate is 400 g, should I connect in parallel with valve to slow down flow through uv unit to get 285 flow rate?
It absolutely can! The filter circulation (not the pump output!) of the 406 is 930 L/h, which is the maximum flow capacity of the UVC Clarifier. The UVC Clarifier is compatible with all models of 06 and 07 series filters with negligible loss of performance!
For all we know this could just be a empty black case as there is no indication that it’s working!!! Because those lights come on even without the uvc plugged into it
Hi there, Fluval is a trusted and reputable brand that certainly does not sell fake/scam products. If the operating status light on the timer is green, the UVC bulb is functioning normally. If it's red, the bulb has expired and the UVC Clarifier must be replaced. If you're still in doubt, you can disconnect the Clarifier from your filter and look inside - a faint purple hue will indicate the bulb is on and working.
@@fluvalThanks for replying i appreciate it…. I always use ur products especially the 07 canister filters they are awesome… Just not sure on the uv as like I said I can plug that timer switch into other things and the green light comes on!!! I ran one on my 407 for about 3 weeks and the algae came back almost every 2 days!!! I plugged my ehiem reeflex back in to the filter and within hours my water cleared right up…
Ive used this Uv for 3 days now. After day one i went to work. I came home and was non stop shocked. the uv device does its job
Although none of my aquariums exhibit any "green" water I decided to add the UVC Clarifier to a 406 on 100 gallon freshwater that is situated in a brightly lit room. Very easy install and this video helped with the timer functionality. The only suggestion I have is Fluval should consider a separate mounting bracket that the clarifier unit can attach to. This way when the clarifier reaches end of life, a replacement unit can simply attach to the wall/cabinet mount rather than using new screws or reusing the same screw holes which will weaken when unscrewing/rescrewing into them.
For this reason I'm looking to drill and bolt/washer mine, I have a feeling the screws will loosen with the vibrations on their own.
I have been avoiding buying one of these as I wasn't sure how the timer worked or how you knew the clarifier was on. You have explained it extremely simply and although I have a Chinese made clarifier bought from Amazon for £25, I am not altogether happy with it so I will now consider buying one of these . Thanks!
We're glad it was helpful! 😄
Love the uvc light it was super easy to install and I didnt think i could get any clearer water but I CLEARLY can 😁
Thanks for sharing - we're so happy to hear that! 🙏
no joke. i did a 70% water change. it looked clear. But wasnt. The UV destroyed the clarity. My gf says i have a fish problem, but after seeing how clear my tank was......she described it as looking through glass.. Like the fish dont even seem like there living in water anymore. thats impressive. thank you fluval!!!!!!
That's awesome! Thank you for sharing!
Hi numbers 2 3 and 5 thank you merry Christmas ☃️
Hey, numbers 3, 4, and 5. And Merry Christmas to you.
Very informative video as always 👍
Will Fluval be making an in-line *heater* anytime soon? There are currently only a few on the market from a couple of no-name brands with mixed reviews. If Fluval made one for a reasonable price, I would buy it in a heartbeat.
Great suggestion!
Amen!!
I like the way you think
I too would like a inline heater for my Fluval 407 and FX6. I have 21 aquariums all running Fluval canister filters. So if you make it you will be receiving my order for 21 units. So please make them.
@@Al13n1nV8D3R he made a offer you can’t refuse. Lol
Good Job 👌
Just picked up one today, thanks for the video was proper confused with the timer and not much info in the manual.
Is it ok to run the UVC clarifier when cycling the tank. Fishless cycle, or will i wait until finished cycling the tank.
We're happy the video was helpful! You can run the UVC Clarifier while cycling the aquarium, but we recommend turning it off for about 24 hours when you add beneficial bacteria to the water / filter. 👍
@@fluval thanks 👍🏻
Works well, but it would be simpler if it showed a 24 hour setting - gets confusing when it resets after power cuts etc., just a thought for design.
I installed the device and I it’s running on its day 3 set on continuously, but I see no progress at all. In fact, I cleaned the aquarium before I installed the device and now it seem like the water it’s cloudier instead. I checked the timer and the light it’s green, not red, but do you think the device could be broken, maybe? It doesn’t look like it to me, and the box was perfectly sealed when I bought it. My question: If I uninstall it, take the hoses off and turn it on, would I be able to see the blue light showing out of the holes where the hoses go? I wonder if the bulb it’s broken or defective.
Hi there! It may take longer than a few days to notice a difference in the aquarium. If the light on the timer is green, the CCFL UVC bulb is in good working condition. If you uninstall the unit and turn it on with no hosing attached, in a dark room you will be able to see a faint purple glow!
Hello, I have a 90 liter planted aquarium, there is a Jbl e 701 external filter that turns 700 liters per hour on it. With this product, is this UV filter enough for a planted aquarium?
I would like you to send a sample for testing
@Fluval. Are you guys going to make a UVC clarifier for the FX canister series? Would love it if Fluval makes one for the FX canisters.😊😊
Hi Lisa, we are working on it! Any updates will be posted to our social platforms. 😉
@@fluval Will Fluval release a UVC in-line clarifier for FX canister filter models & provide a release date? If so, will it be sealed like the one in the video or will Fluval address the issue so users can be able to swap out the bulbs? I have subscribed to you email mailing from your website. Give us something soon for the FX models please! Thank you.
I purchased this and installed this morning. When I initially turned it on the light was green then turned red after about two minutes. I turned off the power and turned on again and the same thing happened with the light turning red after a couple minutes. I tried again and now the light is constantly green but I'm worried its going to break again. Is this normal on a new unit? I thought a red light means the bulb has expired.
Hi, please contact our customer support team about this: fluvalaquatics.com/us/contact-us/
Problem is that those lights work even without the uv plugged into it!!! So we have no indication that it’s working
When will the UVC In-Line Aquarium Clarifier be available for the FX2 canister...?
This month! Be sure to sign up to the Fluval newsletter to be the first to hear about it: fluvalaquatics.com/us/register/
Do you connect it to the intake
Hi there! No, the UVC In-Line Clarifier should be installed on the output side of the filter for the best results.
Works for fx4
Hi there, this model of UVC is not compatible with your FX series. We are currently developing an FX compatible model and will announce and updates regarding it to our social media pages!
One of my clarifiers is missing the timer, can I run it without the timer? By plugging directly to the power supply.
Hi Michael, absolutely! The UVC Clarifier will run 24/7 if plugged directly into the power supply, but you can add a normal timer to it for it to run intermittently!
it's a bad design that if the bulb stops working you have to replace the hole unit
Yes it's unfortunate but its the way uvc is & limitatioms of current plastic materials. The plastic inside degrades after so much light /time it gets brittle /deform
@@Peter12029 That honestly doesn't explain why Koi Pond UVC Filters work fine for multiple years, with only a yearly lamp replacement. I mean if they can develop a unit with a replaceable lamp, then it shouldn't be much more difficult for an Aquarium (Koi Pond UVC Unit)
@@revolutionmusic7904 Pond and aquarium are both different temperatures, specifications etc ... Also the price would play a much higher role.
Can’t you leave it plugged in all the time
You can absolutely run the UVC Clarifier 24/7 if you'd like! 👍
Does the green light come on only when the light is working, for example if you set if for 8 hrs a day, will the green light only be on for those 8 hrs to let you know it’s doing something or will the green light always be on?
Thanks
Hi I have the uvc myself if u got it on for 8 hour day the green light will stay on for that time than go of and back on 8 hours later hopefully that helps 👍🐠
Problem is that those lights come on even without the uv plugged into it!!! So we have no indication that it’s working
Great looking design can you tell me what is the Wattage of the UV ,there is so many out there with all different wattage from 3w to 50 or higher what's the right one if you want it to kill harmful bacteria ,please advice .
It is 3W. Please use this link which will direct you to all available specs and information: fluvalaquatics.com/us/uvc-in-line-clarifier/
@@fluvalI have a question concerning the wattage. Why is it only 3W, while others for about 300l are more in the ballpark of ~10 to 18W? Thanks in advance!
Can I use this while cycling?
Hi there, yes it can! We recommend turning off the Clarifier for an hour or so after dosing your tank with bacteria.
Is there anything out for the FX6 yet??
Not yet! Any updates will be posted to our social media pages. 😊
Do i still need to change 20% water bi-weekly ?
Yes! The UVC Clarifier does not replace regular aquarium maintenance. We recommend at least a 25% water change every week! 👍
Is it possible to use a standard 16/22 tube that is not coming from fluval? I saw you guys have your own tube design? Thank you guys!!!
We recommend using the hosing included with the UVC Clarifier, but standard 5/8" / 16 mm tubing will work as well.
@@fluval thank you. Because I have a filter from Oase with inline co2 installed which has different tubing. 🤷🏻♂️
I have a Fluval 307 with this clarifier that I have just purchased. One question that sounds stupid is what flow rate would it be best to run at.
Hi Mark! You can run the filter at full flow - the UVC Clarifier is fully compatible with even the 407 at maximum flow rate.
Thanks for the quick reply it just made me wonder that if the water was in the chamber longer it would work more . Many thanks Mark.
Does it help keep ammonia down
No, the UVC Clarifier will not have any effect on ammonia. Don't overstock and overfeed your tank, perform regular water changes, and make sure your filtration is adequate!
Thank God a white guy that speaks English thumbs up 2 seconds in what fluval filter is the best for the uvb clarifier to work on a 207 or a fluval 407
Hi Joe! The UVC Clarifier will work perfectly with any filter in the 07 Series range, so we'd recommend picking the one that's best suited for your aquarium!
@@fluval awesome thanx!!!
Will this work with my 407 canister?
Absolutely! 💯
Hi I just got one of uvc I installed today day things looked all good green light on to say it working after a few minutes it go to red and that indicates that the bulb needs to be changed that should not be like that as its 3 days old?
You should return the unit for replacement, it make have suffered damage in transit.
Those lights come on even without the uv plugged into it!!! So there no indication it’s working
I have a question does ammonia make those bubbles in my tank and can I use ammo lock to treat it?!
If you are referring to bubbles you see attached to the glass after filling a tank initially with tap water, those are not composed of ammonia but rather nitrogen and oxygen.
Does it only fit on fluval filters?
It will fit other canister filters that accept the same fitting diameter as the 07 canister filter line.
La. Lampadina u V c. Una volta Consumata. Si può. Sostituire ??
No, una volta scaduta la lampadina è necessario sostituire l'unità nella sua interezza.
Will this work with my 5gal fluval spec freshwater kit aquarium?
Hi Venti, our UVC in-line clarifier is not compatible with the SPEC V as the UVC needs to be used with a canister filter. (06-07 series) 😊
@@fluval do have a UVC recommendation in mind that I can use with my tank?
Can this tool conected with fx4 directly?
The UVC Clarifier is compatible with canister filters with 5/8" / 16mm hosing, such as the 07 and 06 series. A version of the Clarifier compatible with the FX series is in development!
which chemicals will this kill/stop working etc
Hi Taylor! The Fluval UVC Clarifier eliminates suspended bacteria and algae responsible for causing cloudy and green aquarium water. 👍
will this work on on parasites?
In general, parasites are too large to be effectively terminated by UVC light. To treat parasties, we recommend consulting your local aquatics retailer for assistance.
when a device is launched and for fx 6 ?
A version of the UVC Clarifier compatible with the FX series is in development!
@@fluval I have both 407 and FX6. I would much prefer this on the FX6. Any updates as to when one can expect for the FX6 and suggested MSRP? And similar to the Fluval 3.0 LED light which I also have...might I suggest Bluetooth connectivity?
What is the use of the Fluval clarifier
Kill off parasites and various algae.
ruclips.net/video/XYFqDwwp2qI/видео.html
If your water turns green, a UV light will make it clear again.
The UVC Clarifier helps maintain a clear and healthy aquarium, prevents cloudy and green water by eliminating suspended algae and bacteria, helps keep live plants healthy, and reduces maintenance overall! You can learn more about the Clarifier here: fluvalaquatics.com/us/uvc-in-line-clarifier/
@@DeFreeseAquariums is it for the planted aquarium only or for non-planted tanks also ??
What is the gallons per hour you get when your 406 ( 330 gph) is attached to the uv sterlyzer? Is the dischrge different when on or off? Acording to my research you lose about 75 gph, true?::
Hi! The filter circulation (not the pump output!) of the 406 is 245 GPH, which is the maximum flow capacity of the UVC Clarifier. The UVC Clarifier is compatible with all models of 06 and 07 series filters with negligible loss of performance!
Hi how may i get fluval logo stickers , i want to add it to my sticker wall
Thanks for the question, something for us to consider for the future.
Been trying to get it here in Europe and can't find it anywhere .Has it been shipped to Europe yet. I know things are delayed due to this virus.
I'd like to know when its available to buy in Scotland 🏴
I'm in the UK and Hagen are very selective what they make available. I have to import AquaClear filters from Germany. I asked Hagen and they told me the retailers decided not to stock them. Retailers said they would love to stock them. So don't hold on to your hopes for this or any other Hagen product that is not in the UK or for that matter anywhere else.
@@robertfletcher3421 That doesn't sound too good.If it doesn't come to Europe maybe Amazon in the US might ship to Europe.
@@noelkavanagh3507 Just a warning if you buy from the USA make sure it will match your voltage. That's why I guy from Germany.
@@robertfletcher3421 Yeah I will check that out first thanks.
The problem with this design is the glass sleeve will gunk up over time and be less effective, and it can’t be maintained or cleaned , so it will probably reduce the function, if this was a replacement bulb and the glass sleeve could be cleaned I would purchase one 🤔
Hi Simon, thanks for your comment! The UVC Clarifier contains a smooth glass sleeve on the inside. Paired with the powerful UV light emitted by the unit, no algae or debris is able to form or stick to its inside walls. That said, the units effectiveness will not diminish over time due to waste/algae or debris build up and is completely maintenance free. Although non replaceable, the UVC Clarifier features a CCFL (Cold Cathode Fluorescent Light) bulb that runs cooler than traditional UVC bulbs to last up to 30,000 hours, running 24/7, which is three times longer than other UV sterilizers on the market. Hope this helps! 😊
Can this replace my aqua 15 W UV sterilizer forget my 80g reef tank? How much is it to replace the bulb and how many watts is the bulb? What’s the best flow rate? Thank you
Hi, yes the UVC clarifier can be used on your aquarium! The clarifier functions effectively in up to 100 US gallons of water. The product comes equipped with a 3watt high-efficiency CCFL bulb. Although non replaceable, due to the bulbs efficiency you can expect to run the product non stop for 3 years. We have found that the best flow rate range is 245 gallons per hour or less.
@@fluval thank you for the thoughtful reply. So I can connected directly to my return line down stream from my return pump, but since my tank is 80 g the minimize flow rate is 400 g, should I connect in parallel with valve to slow down flow through uv unit to get 285 flow rate?
can this be used on either a 306 or an 406. The flow rate of 930 lph is lower than the 406 1450 lph and 306 1150 lph
It absolutely can! The filter circulation (not the pump output!) of the 406 is 930 L/h, which is the maximum flow capacity of the UVC Clarifier. The UVC Clarifier is compatible with all models of 06 and 07 series filters with negligible loss of performance!
@Fluval when will this be available to buy in the UK?
Availability varies by country, please visit fluvalaquatics.com/uk/ for updates!
@@fluval thank you. I will have a look 👍🤘
For all we know this could just be a empty black case as there is no indication that it’s working!!! Because those lights come on even without the uvc plugged into it
Hi there, Fluval is a trusted and reputable brand that certainly does not sell fake/scam products. If the operating status light on the timer is green, the UVC bulb is functioning normally. If it's red, the bulb has expired and the UVC Clarifier must be replaced. If you're still in doubt, you can disconnect the Clarifier from your filter and look inside - a faint purple hue will indicate the bulb is on and working.
@@fluvalThanks for replying i appreciate it…. I always use ur products especially the 07 canister filters they are awesome… Just not sure on the uv as like I said I can plug that timer switch into other things and the green light comes on!!! I ran one on my 407 for about 3 weeks and the algae came back almost every 2 days!!! I plugged my ehiem reeflex back in to the filter and within hours my water cleared right up…