My Recon broke after two weeks from doing this modification, but it's not your fault. It lasted 8 years of being dry fired and it finally gave way. Nice modification video.
Thanks, my nephew borrowed the gun from me and the 2 small pistols, the red was broken, lost the 3 orig bullets from it, and broke that Recon cs-6 gun. I saw there was a torn dart and with the sticky thing, I removed it and now it's working again, I can pull the barrel again :)
good vid but you dont need to put tape on the back of the place you take the air ristricters out of because i only took the air ristricters out and didnt put tape there i only put it on the little hole and it works fine not trying to be mean
Hi , thanks for the clip very concise I was struggling on how to dismantle this one as the slider keeps jamming. How much of an improvement will I see if I do the barrel mods as shown , but not the spring or plunger upgrade ?
I managed to strip the nerf down and I noticed that the plunger is not a tight fit so I am wondering if I should try plumbers PTFE tape to reduce the gap by removing the O ring and wrapping the tape round a few times before replacing. What do you think ?
ok I tried to do this on my sons nerf gun, but i didn't have the parts, so I put it back together, but now the grey part (or slider as I call it) has jammed in the foward position. I tried to rebuild it several times, but it is still stuck. Please help me and forgive me for using but too many times
he skipped the step where he put clear packing tape around the O ring and lemme tell you packing tape wears if your gonna tape please use electric tape it seels better and holds longer
Hey please help me fast!! I modded mine the same way, but the springs on the trigger and this orange ring that holds the big spring in place alway jump out... what can i do?
That eBay shop is empty now. Would you happen to know where to get that plunger tube these days?
This is about the only video I've seen that shows how to put it back together.
Nice job.
Excellent work - I need the figures, though :) What are the actual improvements in range and so on?
@Kevdogg827 Orange Mod Works. They also have more durable plungers in their kits
its not an aluminium plunger, it is a plastic plunger that has been painted silver. Nice try, but not good enough buddy
holy shit your right
Lol
My Recon broke after two weeks from doing this modification, but it's not your fault. It lasted 8 years of being dry fired and it finally gave way. Nice modification video.
what did broke?
why is this like an ASMR video
Shouldn’t you replace the little spring with a stronger one on the orange thing on the back?
Thanks, my nephew borrowed the gun from me and the 2 small pistols, the red was broken, lost the 3 orig bullets from it, and broke that Recon cs-6 gun.
I saw there was a torn dart and with the sticky thing, I removed it and now it's working again, I can pull the barrel again :)
dood my plastic plunger thing got destroyed when i used this mod wher can i get a aluminum one?
good vid but you dont need to put tape on the back of the place you take the air ristricters out of because i only took the air ristricters out and didnt put tape there i only put it on the little hole and it works fine not trying to be mean
Do you have to drill the whole circle
Hi , thanks for the clip very concise I was struggling on how to dismantle this one as the slider keeps jamming. How much of an improvement will I see if I do the barrel mods as shown , but not the spring or plunger upgrade ?
I managed to strip the nerf down and I noticed that the plunger is not a tight fit so I am wondering if I should try plumbers PTFE tape to reduce the gap by removing the O ring and wrapping the tape round a few times before replacing. What do you think ?
ok I tried to do this on my sons nerf gun, but i didn't have the parts, so I put it back together, but now the grey part (or slider as I call it) has jammed in the foward position. I tried to rebuild it several times, but it is still stuck. Please help me and forgive me for using but too many times
thanks for helping me mo my recon you did good job explaineing what to do also one of the best vids for this ive ever seen :)
dust off stuff to get all the little bits of plastic out of the tube
What is the thing that you apply at 2:03 plz ????? Can you response quickly ? !!!!
He put the tape on the hole on the inside barrel, look on the left of it
where can i get an aluminium thing and a better spring??
How many times did u mess up and have to get a new gun haha an kidding what exactly did that upgrade do?
AHHH THESE GUYS MAKE IT LOOK SO EASY ARGHHHHHHH
Where did you get the aluminum parts
You put the locks back in
where do you get a screwdriver that thin?
where can I get the pinpoint sight(red dot sight)
This is a great video, but I really wouldn't recommend placing tape over an o-ring. I'd instead place it underneath.
where can you get the metal stock plunger???
What is the name of that spring? I seriously need it!!
how did u put the mag in without cocking it back>?
What is the Little slot at the bottom of the handle for
dart
And the bigger spring???
Whats the tape over the hole for?
Why can't i put it back together again? Everything is in the right place but the main spring keeps popping out?
***** except the spring keeps popping out
Try putting the shell on first (but not fully closed) then put in the spring
you said you got the aluminum plunger on ebay. how did you look that up?
Dog278s there is a link in the description
The link does not work
where did u get that red dot sight?
Where did you get the spring from??
Before = 30-35 ft
After = 60-65 ft .....
See by yourself the difference ;)
he skipped the step where he put clear packing tape around the O ring and lemme tell you packing tape wears if your gonna tape please use electric tape it seels better and holds longer
Hey please help me fast!!
I modded mine the same way, but the springs on the trigger and this orange ring that holds the big spring in place alway jump out... what can i do?
Jeikobu Feirodowaka uhhh idk but even if I did this was 2 years ago so.... hi
the slide got a screw from the inside
You don't need to take it
where can i find a plunger
thanks for the in-depth mod steps bro
i did a thing like this with my mavrick and it broke my gun entirely my dad cant even fix it
where do u get that scope from
Where did you find the metal stock plunger ???
Ebay, description.
oh ...ok
I ve never been at such a
lauch after six minutes , when you shot the gun ;p great job howto thankx eek
Hey, nice video! You showed everything really detailed and clear. Thanks for the help! :)
Wtf is the thing that he sprays in the tube
Why dont you just take the tub apart ? Instead of drilling
your modification was entertaining to me:)
where did you get the stock?is it from the raider?
droga montei tudo certo mais esta sem pressao
2019?
Es igual a desmontar una modulus recon?
isabella caicedo trujillo yo hablo un poco espaniol, gato 🙂
thank you very mach you help me to fix my nerf gun
nice scope
do not mod your nerf recon the plunger pops open
It sort of doesn't work as he demonstrates that it just goes all over the place when he shot it first :( pretty terrible If you ask me
is this illegal?
No but painting your gun without orange trigger and barrel
It didnt work for me
thank you
It won't work
Im scared it might break so i left it the way my nerf is and the one who is broken, you fail
Thanks! It works well
Thanks work very well.
Nice
Black!!
thank for making this viedo!!!!!!!
thanks!
I'm turning my recon in to a m4
thanks:)
Non funziona
Wanderful
its one piece
You shouldn't
xX2bcontinuedXx
Where do I get the plunger, spring, and red dot?
where did you get that sight