CB Performance - 1835cc Engine on the Dyno (made 165hp)
HTML-код
- Опубликовано: 25 авг 2024
- Check out the latest Turnkey Engine build at CB Performance. Built by Pat Downs for CB Performance.
1835cc (69 x 92)
Panchito 044s (40x35.5) w/CNC 42cc Chambers & VW-650 Valve Springs
#2292 Eagle Racing Camshaft (270 duration, .529" lift @ valve)
1.4:1 Ratio Rockers
10:1 Compression
Dual 48 IDA Weber IDA carbs
Magnaspark Ready-to-Run Distributor Kit
1 5/8" Lowdown Dual Quiet Pack A-1 Performance Exhaust (prototype)
Lightweight flywheel
Stage-1 Kennedy clutch
165 HP @ 6800 RPM
150 ft/lbs of torque 
Авто/Мото
I had Pat make me a motor like 15 years ago... with EFI.... sat and was never used.... put it in last week and it runs like a gem! He makes the best VW engines... he is a world class builder!
Don't know if you're still around hopefully you are was it the Generation 1 fuel injection cuz I just acquired this badass Baja in my thumbnail that's the generation 1. 2 Nob box fuel injection it's a scat cranks cat rod with CB performance everything heads and I don't know much about this fuel injection and what else I can do to it can I boost it?
@@evilbeetlekustomscreations4965 Yes, it is the gen 1 with the richness knob. I am going to upgrade the ECU when I get around to it, and yes, you could turbocharge it, just make sure the injectors are flow matched, the throttle bodies are a size you could live with and that you have the correct map on the ECU.
has to be one of my favorite motor of all time.
Gotta love dual quiets!!!!!!!
I appreciate these videos but more interaction and Q&A with Pat would be awesome. Video production is nice though.
That sound at redline should give any car guy the fizz.
Would be my dream job , smelling the newness getting hot , and the racing fuel !!
wow pure class
Wow, what an engine!!
Amazing. Truly impressed with this one.
had 1650 in my bug with dual carbs ect and it rocked
simplesmente show de motor , motor dos sonhos!
If we could get the spec's on the carb setup this would really help us all! ;)
My favorite combination from 64vw of nj 💪
Thank you
Nice build....👍
great motor!!!!!!!!!!!!
Potente e lindo!!!!
Can you recommend this for a daily drive? And can this come with a new transmission too?
I'm thinking it's good to go as long as you run premium fuel. Compression isn't that high.
This could be the end of the World
I'd like to have a engine like that in my Henway.
Is That Belt Idler Spring Loaded 🤔 Looks So Tight At High RPM
Wow! What does a build like this cost? Looking to push a 1970 Westy Pop -Top. Thanks!
With everything shown, price was $8400.
Pat, 2276 w/48 ida's vs. 2332 w/44 idf's for a weekend warrior street bug. Which would more fun? Similar heads, cam, etc. I always wondered a larger displacement engine with more streetable carbs vs a slightly smaller engine with much larger carbs. I'd like to see a side by side comparison.
What’s the idle on this? I have this in my 1969 VW Beetle, but idles low I feel, seems to sputter in and out of synchronized and pops every so often.
Dude it’s a VW !!!
I just built one similar, I hope mine gets near you hp.
Great motor. What is the peak torque on a motor like this and at what RPM is it reached.
Beautiful engine! I want to build a clone of it. But i did not know the compression ratio could be so high at 10.0:1. Also if you like the stock style exhaust system, can you put something like that on that kind of engine?
Almost 0 rocker noise. What clearance is it running? Maybe the ratio rockers keep them quiet?
What is the difference between this and the 2332cc motor that makes the smaller one sound more like a VW and the 2332 sound closer to an inline 4? Thanks.
wasn't Pat Downs involved in BRE 510's?
WHAT is the airspeed velocity of an unladen swallow?
What do you mean? An African or European swallow?
@@CBperformance what length rods is this engine running
You have to know these things when you're a King...
Hahaha, you guys made my day 3 years after the fact!
What the type of this engine? And what the type vw brands and made years?
Odd question, can you guys build a stock motor like a 1500 for a 67?
on their website the smallest one they have is a 1900 cc and comes as a kit that makes 90 horses but is tuned for fuel economy. gives a power boost without being stupidly crazy.
What is the price on a engine like that 🤔 I have a 1973 super beetle and I want a engine like that on mi 🚗
is this the smallest kitty in the line up?
That's a lot
Whats the redline on a motor like that?
dont quote me on this but its roughly 5500.
What's the cost on a build like this?
How are the numbers at the wheels? I can't imagine that there is much drive train loss.
I lose about 25hp
hello how much is that Motor with the same parts
With everything shown, price was $8400.
Por cuanto puedo comprar uno igual? Y me lo envíen a México?
On what octane fuel?
I think you'd be fine on 91 or 93. That's not super high compression.
10:1 is very high for an air cooled street motor.
q me recomienda para una combi 89 es la primera enfriada x agua un motorcito de unos 300hp cto vale
Esa combi trae un 1800 c.c de golf carburada todavía, con “poca” inversión podrías colocar un 2.0 de inyección con ECU o carburación según tu agrado (JETTA A4) y aparte modificarlo:
Porteo y pulido en cabeza o culata en puertos de admisión y escape (sin cepillado de más en cabeza) se podría realizar un trabajo de + relación de compresión para llegar arriba de las 10 o casi (11.0:00^ + -) pero lo tiene que realizar una persona con el conocimiento exacto ya que habría que hacer un trabajo o cálculo de cubicaje muy preciso para evitar calentamiento, un árbol de levas RACING SOLO UNA medida arriba del original ya que con árboles con alzadas más grandes llegan incluso a ser más lentos que si estuviera STOCK el motor, si fuera carburado un par de WEBERS 40as NOTA!: “SOLO LOS ESPAÑOLES” (los WEBERS DUAL EMPI y SOLEX no son tan precisos y llegan a tener poca carburación, el MIKUNI japonés es mejor pero también son escasos los repuestos) un múltiple de admisión pulido en aluminio y una tubería calculada en INOX de 2.5” con silenciador de flujo directo MAGNAFLOW, el monoblock puede estar STOCK, si quieres verte más ambicioso en H.P’s podrías colocar un motor 1.8T de 20V de AUDI A3 aunque esta modificación ya es de mucho más $$$ y para ese motor ya hay cosas muy sofisticadas que van desde 230 H.P’s hasta cerca de 500 H.P’s con BIG TURBO y ECU RACING obvio con pistones y cigüeñal forjados y de preferencia con piezas como son los pistones y vielas y cigüeñal tratados en BALANCEO DINAMICO, lo que ya no te ayudaría mucho sería tu transmisión de 4 vel que obvio también tendrías que modificar forjandola y modificándola en relaciónes cortas 1a y 2a cortas y 3a y 4a largas como se modifican la de los VW air cooled, también tendrías que modificar tus frenos para poder detenerla con mejores prestaciones...aunque en una VW COMBI sería muy letal tener una aceleración tan violenta en baja y alta por la nula aerodinámica del modelo 🤔 podría manejarse ya muy inestable, esto ya es a gusto pero sobre todo a lo que te quieras gastar $$$ amigo!..espero te sirvan mis humildes consejos ya que yo he realizado proyectos de este tipo para algunos autos para BRACKET o 1/4 de milla que tuve antes de meterme a ligas mayores con modificaciones de motos Deportivas 600, (636 KAWASAKI), (750 SUZUKI) y 1000 c.c 👍
How much?
what's the bore & stroke on this engine?
69 x 92 (it's listed in the video description above)
ola eu tenho um motor 69x94 e engle fk-7, eu limito a rotação em 5000 rpm , qual a rotação de potencia máxima desse comando? 7000 rpm?
Eu tenho o meu em 6500
LeonardoValente ele vai forte até 6500?
Quanto fica a velocidade maxima do seu ?
LeonardoValente como nunca passei de 5000 rpm não passa de 160km/h acho que 6500 ele chega em uns 180 , o seu é 1900cc tbm? balanceiro 1.4
Igual ao do video e em velocidade é mais ou menos semelhante
What is an engine like that worth, please?
With everything shown, the price at that time was $8400.
Thank you. I had a black 64 Beatle. I liked it. Fun to drive, even stock.
@@CBperformance You know all things considered, that's not bad. I'm sure engine life would be decent too.
what would this engine cost ??? i want one
With everything shown, price was $8400.
@@CBperformance where you guys are located
I'll tell you what Pilgrim that's one expensive motor$$$$$
What adjustment did you use in your carburetors?
Im not sure what you mean by adjustment?
CBperformance , venturi,
main air, maisn gas,e/ tube jdle jets, punp jet, acc. exh jet user?
Sorry, i do not have that information for this build.
I really like CB performance, but come on people. 165 real horses from an 1835cc motor? I guess it is possible but certainly not as a street motor.
Jpm motor sport in Germany got 230hp from a 1776 and that’s street driven. Drives to track, runs 11’s and drives home.
@@karlrichardson4665 Is this 1776 turbo charged or un-boosted? A 1176 built with a hybrid intake system, turbo EFI, could achieve those numbers if properly tuned.
I was skeptical with it making that much hp. Its possibly, I'm sure the guts are all upgraded, crank and cam.
@@Jayvans_Super Yes it is posable, but at only 1835cc it would have no low end torque. It makes as much hp as a 2275cc motor.
@@masbeetleboy9169 yeh I believe I seen another video of a 2332 that made 188hp that they posted, and that was fuel injected
Even non car-people like this video
United Autoparts Rules california Cartel