a safety tip: You can put the LED strip inside silicone tubing that is very clear and flexible. That will prevent the light strip from making direct contact with the cotton. Also LED produce no heat.
Im a electrician. Where the main light is going to be covered. I would have taken down the main light and wired the Christmas lights into the main section and wired a driver into the light switch as well to run the LED strip. So when I leave the room and hit the switch its all off. Cool set up!
I did this 3 years ago in my bedroom only around the corners. I love sleeping to rain sounds so I put lights that flashes like lightning, feels so good, I love how yours turn out.
In Modern Living Room Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
Every house in America is gonna end up creating respiratory problems. (Polyfill decomposes with heat and emits hazardous gases of vinyl acetate & acetic acid.) 😳
A few pointers.. use double sided adhesive straps for the poster board, not gorilla tape. For the christmas lights, use LED christmas light's, not the incandescent type. Furthermore if you would like to build amazing lightshows, you could use programs like XLights, Vixen, or Lights-O-Rama to make LED sequences.
Must be wonderful to breathe in that room after a while. The clouds would be alive with all the dust gathering on them, and grow by themselves. Very immersive.
@@tkkologne4230 Ever since dust particles can move i guess. And it's not ceiling, it's that fluffy material that dust particles will stick onto. Try sticking a ball of that onto your ceiling, leave it for a week and then slap it with your hand. Be sure to put your face really close to it and take a deep breath. Come here and share your experience afterwards.
This is pretty awesome. My wife loves glowing things on the ceiling. We don't have a ceiling light in our bedroom and she would love this. I may try the "3M" sticky things for hanging because they have different weights. Plus find a way to incorporate stars, moons and planets.
Make part of the ceiling cover with the clouds and the other free. Like the night sky before the storm. Good luck ^^ (cof cof your wife has a good taste for sure). U can also make the lamp looks like the moon and the clouds kinda covering it, that would be cool
I would not recommend 3M. From personal experience it’s way too strong. It will rip your paint off your wall when you try to remove it, even if you use a heat gun.
This is still super unique. I bet the different scenes are meant for things like this. Especially when you consider how well a custom starry ceiling works which ive seen in another video. Its hard to find unique videos like this.
@john curtin. thats what i was thinking, gorila tape does the job but it may lift cheap paint. Im using command strips hoping for a good result but my expectations are low 👍
I was going to say "great video", but you're a Cleveland fan, so I dont know if I can take this seriously. Jokes aside, thanks for this. I saw something like it on social media and I really want to do this in my house, but it looked pretty involved. Your video makes it look (relatively) easy. I'm inspired, my friend. My next weekend project has just presented itself. Thanks Doc.
so we did this as kids in 70s in bedrooms with pillow stuffing and christmas lights and a black light that strobed. you can also play movies in the clouds with a projector we atched starwars every night in clouds. you can do this all on ground much easier then put whole thing up
This is the best one I've seen because of the bloopers....and the goat. Lol. As I was watching this video, I said to myself, all of that cotton is about to hit the deck. When you opened that door!....lol...thumbs up
Just to add to the immersion, use one of those sleep, meditating apps and run the thunder and rain selection and let it sync to the sound to really get the full effect... it's like VR without the heavy headgear.😜
Awesome bro I can’t wait to do this I’m doing it on Monday though already got the sound LED lights just got to get posterboard and adhesive And the cotton
I'm about to start the same project right now. I would suggest trying to incorporate an .ESP32 Micro controller. If you know how to use it it's pretty easy. There's lots of RUclips videos for it. And then download on application called, I think it's w. Light or something like that. Then just a little bit of soldering, wires and hook it up to your micro controller, and you'd be amazed at what you can do. I went a little overboard and have enough lighting in my room to light the neighborhood.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
I love this! I painted my walls blending paint from light to dark blues with white clouds. The ceiling is painted black blue to simulate space. I'm photo transferring galaxies and such on the ceiling I was trying to paint the clouds, but I'm loving what you're doing here. So, guess how I'm spending my afternoon today? I already have all of the stuff and I am So excited! I'm using the clouds to transition the ceiling in the sleep areas darkness to the sitting areas lightness. We have a very, very large man cave/bedroom. Adding the 3 D clouds is so awesome! I can't wait to get it done! Ok, concern for safety altered my designs. I've decided on a dedicated work of art... Made of aluminum foil with a little insulation before the foil as well as shiny asbestos fabric, cut in strips, dipped into liquid starch, shaped, frozen, then attach the frozen ridges like lightening bolts and glue/attach securely, the lights to the outside top of the ridges. Asbestos fabric, (ironing board cover silver fabric), Is something I just happen to have a whole bunch of right now... Dollar tree has foil... cheap foil is actually better for sculpting and shaping ... crunching... That's all part of the fun of it. Staples are silver, like the materials being used, so, I'm using my electric staple gun to install the lights, as well as cable clips... The clouds don't associate with the lights. I couldn't get comfortable with the idea of that. I also have yardage of a gorgeous metallic gold shiny, slightly stretchy, very sexy fabric I intend to cut thin strips of, starch, freeze, then install... Such a fun project!
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Could be done with sequencing software like Xlights. There are a ton of different program's for led light's. Just hook them up to an audrino or raspberry pi and program them.
Hit all my need to knows in the first 1/4 of this. I don't want adhesive on my ceiling.. would spray adhesive wor... BAM you're on it. Amazingly well done start to finish hit all the same concerns I'd have.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all. Also LEDS can cause heat, even ones that advertise "no heat" they CAN cause heat and fires. Many many people have had fires doing this project.
Omg this is so cool ! I’ll actually be moving into my new home soon and gonna use my middle room as a gaming / relaxation room and this is so inspiring. Great video my guy 👍🏽
Agh I forgot all about this comment but I haven’t done it yet ! Me and my lady actually just moved into our new home. It’s been about 3 weeks now I’m setting up things now so I will definitely come back with a update when i get it done 💯
Cool. My kid was asking me about doing this so I looked it up and found your video. Seems easy enough and looks like it won't ruin my ceiling. Guess I got plans to do this.
Fairy lights are not safe. No light is safe. Please do not put polyfill on your ceiling. Even without lights polyfil is very very flammable. Having it cover the ceiling is very dangerous. Lights advertised as "no heat" are a lie and can still get hot. Stay safe
this would be super cool with individually addressable leds and a rpi running sound matching software to wled controllers. You could make it listen for lightning to play a sequence in blue like lightning and a red all flash for explosons or something. Beautiful ceiling either way!
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
No wait, don't do this cause just imagine how much dust it's gonna collect and how much spiders can live there well aside these, if it somehow catches fire the house is done for
Everyone is talking about Spiders but how many spiders actually end up in your house? I see one legitimately every 3/4 months so you should notice during the day before it gets bad.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all. Also please don't put oils in the polyfil its really flammable.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all. Also LEDS can cause heat, even ones that advertise "no heat" they CAN cause heat and fires. Many many people have had fires doing this project.
This is really cool, looks amazing! Especially to turn a room into an art installation. What would you reccomend on cleaning these from dust to prevent allergens?
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Dude, I can't believe I found your channel again. I went off and stopped making projects stopped doing videos stopped working out and nearly died of boredom. So I'm back, and I'm doing this cloud set up in our podcast studio. 🎙️ Which, I'd love to do a video response to your work. FYI I've done my desks, my cabinet lights, my daughter's bedroom ceiling from the mosquito net bedroom project. Under Bed leds, and made my house into a led Manson. This is amazing 👍
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all. Also LEDS can cause heat, even ones that advertise "no heat" they CAN cause heat and fires. Many many people have had fires doing this project.
hey I know im late to this video ! but thank you so much for adding the links and stuff in description description I was having trouble trying to find the exact items I needed iv seen this all over tiktok and was wondering how to do it SO THANK YOU SO MUCH WES! also I subscribe I will be wacthing you when ever I have free time !
@@WesFisher hey! So I’m gonna be honest 😅 I told Rob to go watch your video and give you a like and he yells at me “he shouted us out honey!”. I somehow missed that! Thank you so much ♥️🎄 Hope you have a Merry Christmas !
Christmas lights get really hot for cotton to be on it. They had led lights that have plastic around it and the don't get hit. No matter how long they stay on.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
I wouldn’t worry about the Xmas lights man. Ppl put them in bottles and leave them on 24/7 and the bottle gets warm. That fluffy stuff is also non flammable it just melts before combustion
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Yes a lot of dust will build up that is NOT a joke! I make mine with Chinese lanterns this way it’s easy for me to just take it off the ceiling and throw a new one up.
Question.. how many of the 5lb bags of polyfill did you use for your project? Trying to determine how many I'll need. Sorry if that's already been answered.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Spiders in the Cotten be like: broo is this heaven😎
😮
@@Karen-ih2mt 😳
😳
LMAO IM DYING
Peppermint spray: I'm about to ruin this Arachnid's whole career
a safety tip: You can put the LED strip inside silicone tubing that is very clear and flexible. That will prevent the light strip from making direct contact with the cotton. Also LED produce no heat.
Yupp. They also make LED xmas lights!
Exactly im not sure how ppl manage to catch them on fire.
What about the Christmas lights?
And since they’re not hot they won’t make the poly fill toxic
not all led, some produce heat
Thanks for not being greedy and doin it all in one video. We appreciate it.
Im a electrician. Where the main light is going to be covered. I would have taken down the main light and wired the Christmas lights into the main section and wired a driver into the light switch as well to run the LED strip. So when I leave the room and hit the switch its all off. Cool set up!
Ha. Was thinking the exact same thing as a fellow electrician.
The main light has its own switch. The man clearly knows what he wants.
@@SaigaGameClips same as a fellow plumber lol
Ummm okay, but your average person doesn’t know how to do that without electrocuting themselves so that’s really not helpful.
Some people's houses aren't too dusty, I have an old house wirh lots of animals so mine is very dusty
I did this 3 years ago in my bedroom only around the corners. I love sleeping to rain sounds so I put lights that flashes like lightning, feels so good, I love how yours turn out.
Will spiders go in the clouds?
@@JGXX ew that would be so disgusting
@@JGXX No but it’s 3 years so the poly fill looks dusty , Not as white but it’s still good
Hi make sure you stay safe , polyfil is extremely flammable on its own and so are the lights
I love RUclipsrs like you… gets straight to the point while being informational
Imagine having like a bright led light pointing down from the middle looking like heavenly light shining down
I litterally thought the EXACT same thing
GOOD IDEAAA!!
I’m afraid god wouldn’t descend his light down for me
@@kay9111 wherever there is light there is shadows
Then, play the church choir "aaaaaaa" . The same sound when you open a case when it lit up from the inside. Like in the cartoon
I know that those leds don't get warm but a voice in the back of my head screams HOUSEFIRE!!!!
It wouldn't be screaming with all that soundproofing though 🤔😉
Poly-fill is non-flammable. It's used in childrens stuffed toys.
This is probably the most creative shit ever lol, i gotta do it
LANGUAGE!😅
@@liamdom1050 he can say whatever he wants
Lmfao true dawg I’m trying this shit as well
dont. when ur LED'S run out u take off the clouds and theres gonna be like dead bugs cause bugs are attracted to light
In Modern Living Room Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
The spiders living in there are having the best rave parties ever!!!
LMAO!!!
Probably all blind af lol 8 eyes with bright lights in there face
Spiders tend to prefer building their own webs so they wouldn’t be inclined to live there that’s not to say they are garenteed not go there
Every house in America is gonna have this.
Yesssir
Every house in America is gonna end up creating respiratory problems. (Polyfill decomposes with heat and emits hazardous gases of vinyl acetate & acetic acid.) 😳
And the rate of house fires could potentially rise. No doubt it looks nice though. I'm not trying to be a complete party pooper.
Not mines
@@gedionsamuel2256 just use cotton with an led light that poses really small risk of fire.
Thank you for posting the links to the items you used. I watched 5 videos before yours who didn't have them. Respect!
"Damn i wanna do that"
Ceiling fan - no.
I was literally bouta do this and yu just reminded me I have a fan💀💀
Do it on your wall, that's what I did. I am uploading a video on how I did it if you wanna check it out! (purely inspired by this creator)
Hahaha you just reminded me I have been me too 😅😅😅
😂😂fTrue
@@Meerapup_M hey
A few pointers.. use double sided adhesive straps for the poster board, not gorilla tape. For the christmas lights, use LED christmas light's, not the incandescent type. Furthermore if you would like to build amazing lightshows, you could use programs like XLights, Vixen, or Lights-O-Rama to make LED sequences.
nerd 🤓
Great points
@@jesusbarajas6312 uno reverse card
I was laughing when he said don’t put glue on ceilings. Hence Gorilla Glue Tape 😂😂😂
@@MichaelAnderson-od8pz Just imagine having to fix that ceiling after he moves out!
This is going to change the game of home decor, if it hasn't already, too cool.
Thanks
@@WesFisher so dry
@@hotdog3392 ikr, he only says "thanks" and "lol"
@@its_erynns wtf is he supposed to say?
Lol 🔝
Dad: What’s the use of it?
Me:
*”So it won’t hurt when the house gets upside down”*
lol
🙃 ǝɯ suıoɾ oɥʍ ǝuoǝɯos ʎllɐuıɟ
But the bed will fall onto you lol
I’m not even worried about spiders, I’d be more concerned about the sheer amount of dust that poly-fil can hold
Must be wonderful to breathe in that room after a while. The clouds would be alive with all the dust gathering on them, and grow by themselves. Very immersive.
@@tkkologne4230 Ever since dust particles can move i guess. And it's not ceiling, it's that fluffy material that dust particles will stick onto. Try sticking a ball of that onto your ceiling, leave it for a week and then slap it with your hand. Be sure to put your face really close to it and take a deep breath. Come here and share your experience afterwards.
@@DoctorStrange01 😂😂😂😂😂😂😂
@@DoctorStrange01 been a week you think he tried It? Lol
@@cornfarts I think he did and died from lung failure from all the dust he inhaled.
When he started yelling “ayy ayy ayyyyy”😂😂
Got me scared thought I was getting in trouble 😰
I was so excited for this and then my girlfriend hit me with the fear card and told me that spiders will hide in them. Ruined. In 5 seconds.
@Brandon Allen those leds aren’t a fire hazard they’re safe
@@casey5628 No but the cotton and spray adhesive are
No spiders hateeee peppermint. U can buy an all natural peppermint spray to spray in the clouds and it will smell good and repel the bugs.
Thanks for being a party pooper lol
@@oliviaaltizer1408 Thanks 😊
Never mind the spiders but u have to admit it does give that room a whole different feeling and creates a wonderful affect great job
This is pretty awesome. My wife loves glowing things on the ceiling. We don't have a ceiling light in our bedroom and she would love this. I may try the "3M" sticky things for hanging because they have different weights. Plus find a way to incorporate stars, moons and planets.
Omg i wanna seeee if u made it, that’s so sweet to do for ur wife btw😍🥺
Make part of the ceiling cover with the clouds and the other free. Like the night sky before the storm. Good luck ^^ (cof cof your wife has a good taste for sure). U can also make the lamp looks like the moon and the clouds kinda covering it, that would be cool
It looks awesome, I want to do it, but my question please, did you use plane cotton or it's like cotton for construction? 🤔
I would not recommend 3M. From personal experience it’s way too strong. It will rip your paint off your wall when you try to remove it, even if you use a heat gun.
What a fantastic job! Tip: You can use LED fairy lights that don’t get hot (instead of the Christmas lights)
Last time I went shopping for Christmas lights they were mostly led.
That was my biggest concern tbh
Led lights don’t get hot so they should be okay. Christmas lights tend to be bigger then fairy lights which are sold all over Amazon
Yeah and combine with that fabric if they get hot enough it can start a fire
You saved me a comment, thanks!
" Homeless people usually have a better setup than this because they sleep beneath the stars."
lol
With a lots of mosquitoes yeah
Well...
@@TORNES1998 the mosquitoes are just relaxing sleep sounds lol
💀😂
Yours look cleaner, like the lights are more disbursed. Great ambiance.
Yes, thanks
This is a perfectly laid out video. Nice results, seems easy enough for anyone to do! Great job! :)
Untill you try to do that
It's basically sleeping under the clouds inside your home everyday, lol!!!
Black nerds are super cool dudes -
Great job on the clouds
This is still super unique. I bet the different scenes are meant for things like this. Especially when you consider how well a custom starry ceiling works which ive seen in another video. Its hard to find unique videos like this.
Pro Tip: that tape is going to be hell on the ceiling you should try command strips.
More of a pro tip. You’re probably going to paint before you move out anyways, which will fill the holes, just use a staple gun….
I’m going to use command strips it will be expensive but worth it my whole house has command strips.
@john curtin. thats what i was thinking, gorila tape does the job but it may lift cheap paint. Im using command strips hoping for a good result but my expectations are low 👍
@@King-of-The-World i see your point ... nice idea 💡
What tape won’t ruin the paint on my walls anyone know
Imma wake up thinking heaven is trying to take me lol😂😂
😂😂😂
😂😂😂😂😂
I was going to say "great video", but you're a Cleveland fan, so I dont know if I can take this seriously.
Jokes aside, thanks for this. I saw something like it on social media and I really want to do this in my house, but it looked pretty involved. Your video makes it look (relatively) easy. I'm inspired, my friend. My next weekend project has just presented itself. Thanks Doc.
so we did this as kids in 70s in bedrooms with pillow stuffing and christmas lights and a black light that strobed. you can also play movies in the clouds with a projector we atched starwars every night in clouds. you can do this all on ground much easier then put whole thing up
That’s exactly what I thought. Why don’t you put the clouds on first and then put it up
This is the best one I've seen because of the bloopers....and the goat. Lol. As I was watching this video, I said to myself, all of that cotton is about to hit the deck. When you opened that door!....lol...thumbs up
Just to add to the immersion, use one of those sleep, meditating apps and run the thunder and rain selection and let it sync to the sound to really get the full effect... it's like VR without the heavy headgear.😜
Ngl that concept and build are amazing. Might do this to my office. Thumbs up
It’s sick af but you would have to replace atleast every 3 months to prevent a spider colony ceiling
Just spray some peppermint, natural bug repellent
@@imnfewirose876 but are u sure it will work??? Bc if i see some spiders in my clouds I’m gonna burn the house down
@@lillyl761 fax yo😂😂
@@lillyl761 faxxx
You want spiders in your house, they eat bugs and eggs that you actually don't want in your house
Awesome bro I can’t wait to do this I’m doing it on Monday though already got the sound LED lights just got to get posterboard and adhesive And the cotton
That would be pretty neat for a Phillips hue type of technology
I'm about to start the same project right now. I would suggest trying to incorporate an .ESP32 Micro controller. If you know how to use it it's pretty easy. There's lots of RUclips videos for it. And then download on application called, I think it's w. Light or something like that. Then just a little bit of soldering, wires and hook it up to your micro controller, and you'd be amazed at what you can do. I went a little overboard and have enough lighting in my room to light the neighborhood.
I bought a cloud like this for my baby when it was born this just took it to a whole next level
it
when it was born hahahah
@@BigDymz “it” is not the right word
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
I’m actually doing this next week but I’m adding ‘icicle’ lights to make it look like it’s raining as well~
That sounds awesome. Consider staying with the glue stick. They seem to hold up better then the spray. Update video coming soon!
that sounds awesome omg!
Broo if you film it ill watch and subscribe
Could you possibly make its video and upload it on RUclips ? I'll subscribe to your channel
That’s crazy I was gonna do that
I love this! I painted my walls blending paint from light to dark blues with white clouds. The ceiling is painted black blue to simulate space. I'm photo transferring galaxies and such on the ceiling I was trying to paint the clouds, but I'm loving what you're doing here. So, guess how I'm spending my afternoon today? I already have all of the stuff and I am So excited! I'm using the clouds to transition the ceiling in the sleep areas darkness to the sitting areas lightness. We have a very, very large man cave/bedroom. Adding the 3 D clouds is so awesome! I can't wait to get it done!
Ok, concern for safety altered my designs. I've decided on a dedicated work of art... Made of aluminum foil with a little insulation before the foil as well as shiny asbestos fabric, cut in strips, dipped into liquid starch, shaped, frozen, then attach the frozen ridges like lightening bolts and glue/attach securely, the lights to the outside top of the ridges. Asbestos fabric, (ironing board cover silver fabric), Is something I just happen to have a whole bunch of right now... Dollar tree has foil... cheap foil is actually better for sculpting and shaping ... crunching... That's all part of the fun of it.
Staples are silver, like the materials being used, so, I'm using my electric staple gun to install the lights, as well as cable clips... The clouds don't associate with the lights.
I couldn't get comfortable with the idea of that.
I also have yardage of a gorgeous metallic gold shiny, slightly stretchy, very sexy fabric I intend to cut thin strips of, starch, freeze, then install... Such a fun project!
That sounds amazing!
How did this turn out please share with me!
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
I'm setting up my music studio. Definitely doing this. Thanx my dude.
Have fun!
That's amazing, now if you can get those clouds to rotate like a vortex, that woulf be phenomenal!
Someone mentioned not doing the clouds because of a ceiling fan in the room-- I feel like there's a fix here but not sure how safe it would be lol.
@@skandalousbytch as long as the the rotation stays on the lowest setting, might be ok 👌
that’s actually so dope
Do you think if you put the LED to go with the music it would flash when you play sounds of thunder? To go along with each other
Yes it will
Could be done with sequencing software like Xlights. There are a ton of different program's for led light's. Just hook them up to an audrino or raspberry pi and program them.
Hit all my need to knows in the first 1/4 of this. I don't want adhesive on my ceiling.. would spray adhesive wor... BAM you're on it. Amazingly well done start to finish hit all the same concerns I'd have.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Also LEDS can cause heat, even ones that advertise "no heat" they CAN cause heat and fires. Many many people have had fires doing this project.
Omg this is so cool ! I’ll actually be moving into my new home soon and gonna use my middle room as a gaming / relaxation room and this is so inspiring. Great video my guy 👍🏽
Awesome, let me know how it turns out.
Any update?
Update?
Agh I forgot all about this comment but I haven’t done it yet ! Me and my lady actually just moved into our new home. It’s been about 3 weeks now I’m setting up things now so I will definitely come back with a update when i get it done 💯
Sounds good!
If y’all scared to do this just get a star projector. Looks like smoke is moving around on the ceiling. Trippy but cool as fuck
I have that now and I want this cloud ceiling so much more!!
I have one and I love it!!
Fax
It looks great and realistic. Not a tik tok'er, so my first time seeing. Love the colors in the clouds, indoors! Cooool!😎
Thank you so much for filming this entire process!!!
Glad you found it helpful!
This reminds me of the Pink from P Valley
Quick tip buy a 10$ Amazon adapter for your ceiling light that gives u a socket in place of that light . Now u have no cables hanging
Whats it called?
Cool. My kid was asking me about doing this so I looked it up and found your video. Seems easy enough and looks like it won't ruin my ceiling. Guess I got plans to do this.
I know someone that did same thing. The whole house almost caught fire. After him doing it from TikTok so think twice
@@jenniferholland5785 LED lights produce no heat so if he used those there should be no issue
W dad
Fairy lights are not safe. No light is safe. Please do not put polyfill on your ceiling. Even without lights polyfil is very very flammable. Having it cover the ceiling is very dangerous. Lights advertised as "no heat" are a lie and can still get hot. Stay safe
this would be super cool with individually addressable leds and a rpi running sound matching software to wled controllers. You could make it listen for lightning to play a sequence in blue like lightning and a red all flash for explosons or something. Beautiful ceiling either way!
Cool idea!
I love the way creative ppl are not afraid of using space, fluffy stuff, lights etc I would feel overwhelmed! 🤔✨
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Hey Wes, get you a small model replica of "Cloud City" from Star wars, and hanging up there with them clouds. that would be badass man.
Quick tip, if you want to hide the wires you can buy a lightbulb to outlet adapted and plug in the leds to that so there are no visible wires
Wow😱😀 thanks i had no idea such a thing existed.. Awesome!!!!!!!
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Hello there ! The room is very clean , congratulations about it. Nice mustafar cloud mate ! Thanks for everything , and thank you for being you
My daughter wants a cosmic galaxy room, so doing this. Thank-you 😊
How cool of you!
@@ceasarsalad2055 thanks 😊
Omg thats so nice :)
No wait, don't do this cause just imagine how much dust it's gonna collect and how much spiders can live there well aside these, if it somehow catches fire the house is done for
@@peranbu9088 you have an excellent point. Itd be like a horror show 💀
Everyone is talking about Spiders but how many spiders actually end up in your house?
I see one legitimately every 3/4 months so you should notice during the day before it gets bad.
Lol that's because they sneaky
Ehh i had a spider infestation once..
Once they lay eggs you better be ready to move out 😂
Bruh come to India they be dining with you😂
I know that’s like saying there could be a spider hiding under the bed! So you get rid of the bed! Yes clear logic there right?!
I'm doing this for my 6y.o son's room. Thank you!!
For anyone cautious about spiders. PEPPERMINT OIL and a spray bottle. DON'T drench the clouds. Lol
What kind of peppermint oil ?
@@Jassupnextt I use MIGHTY Mint insect and rodent repellent or NOW peppermint oil. Any good essential oil will do.
Oil + potential heat source+ fibre = eminent fire 🔥🔥🔥!!!
@@momenashour no response, ha house must have burned down
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Also please don't put oils in the polyfil its really flammable.
It’s cool I was hoping this was for his son or daughter. Christmas present ideas dads!!! These kids are the future!!!
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Also LEDS can cause heat, even ones that advertise "no heat" they CAN cause heat and fires. Many many people have had fires doing this project.
It looks really good. I am worried if it's a fire hazard with a hot bulb and cotton
If your doing this with leds use high quality ones not cheap wish ones
I am so excited to do this holy crap
This is really cool, looks amazing! Especially to turn a room into an art installation. What would you reccomend on cleaning these from dust to prevent allergens?
I was thinking the same thing, how to keep white clouds from Becoming dirty , dusty looking clouds? I get it, pretend the clouds are storm cloud🙄
I was wondering same thing
Simple, use a air filter/ cleaner in the room to prevent dust from accumulating.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
easy to understand, list everything in the discription, this is what we need to see more of on youtube, thhis vid was amazing
Way easier than I thought as an artist I have all these things thanks so much! For short and to the point!!!
Use flat thumb tacks instead of tape. Tape eventually gives out and will rip your ceiling. 👌🏽
wow that ceiling is amazing. I haven’t taught of that. What a great idea
it looks cool, but theres a chance of it catching on fire
@@troythemakyr That’s also my concern. Because of the lights that can short circuit and ignite the cotton.
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Looks fab! A bugger to dust I imagine. Does look pretty though!
Fire is rubbing it’s hands on this project.
honestly 😂😂😂😂
Led lights don’t produce any heat so it’s fine but idk bout the Christmas lights
Can you imagine how much dust that fill on the ceiling would collect over time. Spiders and Silverfish.
Make it then let us know.
😒😠so nice but your right. Screw that
@@test-zg4hv Not true I spent a long time doing this and I always kept my room clean got infested with bugs took it all down
Its dope but dang might be hard to clean when it starts collecting dust
Keyboard cleaner should be fine
@@brandonmiller9155 wouldnt it malform the cotton?
Air purifier
Dude, I can't believe I found your channel again. I went off and stopped making projects stopped doing videos stopped working out and nearly died of boredom. So I'm back, and I'm doing this cloud set up in our podcast studio. 🎙️ Which, I'd love to do a video response to your work. FYI I've done my desks, my cabinet lights, my daughter's bedroom ceiling from the mosquito net bedroom project. Under Bed leds, and made my house into a led Manson. This is amazing 👍
Let me know when it's done, and let chat soon. Welcome BACK!
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Also LEDS can cause heat, even ones that advertise "no heat" they CAN cause heat and fires. Many many people have had fires doing this project.
hey I know im late to this video ! but thank you so much for adding the links and stuff in description description I was having trouble trying to find the exact items I needed iv seen this all over tiktok and was wondering how to do it SO THANK YOU SO MUCH WES! also I subscribe I will be wacthing you when ever I have free time !
In the description *
Thank you! more videos coming soon. I think you'll really like the Govee TV immersion light. It trending on tiktok as well. It's so cool!
This is so beautiful!! Thanks for the great instructions!
love this video !! well explained and beautifully done. can’t wait to do it for my gaming room too
I tried this with double tape and I'm not sure if it was my wrong doing but most of the clouds fell off, I think I will try your method this time
Good luck for second time around
I'm moving on my own in June and I'm definitely going to do this in my bedroom. I already have cloud lights in my roomm
Dude brought the Heaven in his room
Hey hey!!! 😄Awesome seeing you tried it ! Yours came out nice tho! 👍🏽
Thank you soo much! Your guys video helped a lot. Plus using the spray adhesive was clutch.
@@WesFisher we will probably do adhesive instead next time! Nice job tho! ♥️
@@WesFisher hey! So I’m gonna be honest 😅 I told Rob to go watch your video and give you a like and he yells at me “he shouted us out honey!”. I somehow missed that! Thank you so much ♥️🎄 Hope you have a Merry Christmas !
@@TheWesleys Of course, you guys taught me everything I know. Thank you so much! Merry Xmas to you and your family!
Christmas lights get really hot for cotton to be on it. They had led lights that have plastic around it and the don't get hit. No matter how long they stay on.
True
My dude this was done so well thank you for the detailed video on how to do it question roughly how much did it cost in total?
Roughly $100
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Thank you for putting all you need in the description
this dope af fareal.
Thanks for this. I'm about to do this in my room when I decorate it! Minus the Christmas lights though possibly.
Looks cool, but imagine the dust it collects after
and spiders :(
Lol, my same thoughts
It looks cool but I am thinking Fire Hazard......
Slowwwwwly turns into storm clouds
How do u get rid of the dust on it
I can’t wait to have this in my room once I can get the correct materials ❤❤❤
I wouldn’t worry about the Xmas lights man. Ppl put them in bottles and leave them on 24/7 and the bottle gets warm. That fluffy stuff is also non flammable it just melts before combustion
Use LED christmas lights. Those old ones get toasty
@@CJBuzzy nice shades!
Dang bro your video blew up, also thank you for the tutorial on how to put this stuff up :)
Your Welcome
Woah 🤯 I’m totally doing this asap! Thanks for the idea.
Have fun!
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
Tape on the ceiling: “Alrighty, let’s do this!”
Australian Summer Heat: “Not on my shift..”
That’s the “ P - Valley “ movie look 😂😂 Ok “ Game room “
That ceiling looks unreal. Wow.
Thanks!
Imagine the dust that would build up in that
Yes a lot of dust will build up that is NOT a joke! I make mine with Chinese lanterns this way it’s easy for me to just take it off the ceiling and throw a new one up.
Yas
A match would fix that, untreated cotton or synthetic without a flame retardant treatment poses an issue. A warning.. or a thought
That’s the reason I don’t want to have that type of ceiling
If you us an air purifier in the room no dust. Simple really.
Question.. how many of the 5lb bags of polyfill did you use for your project? Trying to determine how many I'll need. Sorry if that's already been answered.
It's all good, I bought 4 or 5, can't remember exactly
Hi I'm just letting you know this project is a safety hazard. The LEDs can actually get hot. Stay safe and be careful! I don't reccomend this project at all.
You had me at this is my house 👏🏾🥰
mad respect for not doing part one and two video type stuff
Thanks
Just imagine how much that would be in the store 😍🤣
A LOT; it's crazy how expensive they are.