What difference does it make by deleting the swirl flaps ? great video. I have a 2003 ml 270 cdi also . Do you have a list of the Parts & Numbers , I'm Old my eyes are not what they used to be . Cheers .
I heated the bolts with a blow torch and then twisted them into position without having to tap the hole. Trick is to heat the bolt and then screw turn into position and immediately screw turn out using cold water to cool the area.
THANK YOU BUT ONLY THIS IS HARDWARE YOU DELETE AND WHAT ABOUT SOFTWARE EGR OFF ?? HOW DID YOU DO IT PLEASE BECAUSE IN MOST CARS ITS NOT WORKS ONLY HARDWARE DELETE FLAPS
I did it on the om646 w203 2003, but the car still doesn't start, the engine is connected, the check lamp is not there, but there is a valve error, do I need to software solve the valves, I think I should turn them off?
Hello super top video I would like to know what is the point of making this modification and if I can do it on my clk 270 cdi w209 auto box. thank you in advance good luck have a nice day
Those plastic flaps are brittle and it's pressure and oil leaking point. So you can get black smoke, slow acceleration and in worst case scenario they could break off and cause serious engine damage. So definitely worth doing.
Thanks for the video... do you know if the 270 xdi installed in the 2012ssangyong Rexton built under license from Mercedes, will have the same flaps? what could be the symptoms thanks.
symptoms is rich running (lots of smoke), oil soaked left hand side of engine-block, and limp home mode, do this and erg shunt and you will have lots of power again and far better milage
What difference does it make by deleting the swirl flaps ? great video.
I have a 2003 ml 270 cdi also . Do you have a list of the Parts & Numbers , I'm Old my eyes are not what they used to be . Cheers .
Great video, thanks for taking the time to list required parts. Fuel cooler delete video would be interesting also.
Thanks. I will make one.
I heated the bolts with a blow torch and then twisted them into position without having to tap the hole. Trick is to heat the bolt and then screw turn into position and immediately screw turn out using cold water to cool the area.
bless you friend you saved me 200 eur
THANK YOU BUT ONLY THIS IS HARDWARE YOU DELETE AND WHAT ABOUT SOFTWARE EGR OFF ?? HOW DID YOU DO IT PLEASE BECAUSE IN MOST CARS ITS NOT WORKS ONLY HARDWARE DELETE FLAPS
It is not needed to edit software as long as you keep servo motor connected.
@@f0llower Thank you so much bro
What's the purpose of these damn flaps in the first place?
Hi f0llower..Superb video that you did... Would you please do a video for EGR deletion for ML270 ? Thanks in advance.
Thanks for the feedback. Yes I'll do.
Any faults or issues after deleting them ?
What about the actuator? Does it generate fault code for movement without the flaps?
No, keep it connected and it's fine.
I did it on the om646 w203 2003, but the car still doesn't start, the engine is connected, the check lamp is not there, but there is a valve error, do I need to software solve the valves, I think I should turn them off?
Hello super top video I would like to know what is the point of making this modification and if I can do it on my clk 270 cdi w209 auto box. thank you in advance good luck have a nice day
Those plastic flaps are brittle and it's pressure and oil leaking point. So you can get black smoke, slow acceleration and in worst case scenario they could break off and cause serious engine damage. So definitely worth doing.
Thanks for the video ...what bolt did you used is it M14 bolt or what kind is it ??
Hey man, it's noted in the very beginning, I've used M14 20mm long
asparagus thickness m14 ?@@f0llower
Thanks for the video... do you know if the 270 xdi installed in the 2012ssangyong Rexton built under license from Mercedes, will have the same flaps? what could be the symptoms thanks.
Take off engine cover and you will see on the right side of engine, if it's same
symptoms is rich running (lots of smoke), oil soaked left hand side of engine-block, and limp home mode,
do this and erg shunt and you will have lots of power again and far better milage
Can these leaking flaps cause limp mode ? My car is w203cdi 220 om 611 engine.
Of course.
what glue do you put on sundresses?
RTV Reinzosill is the black one and regular thread lock blue one.
How was the fuel consumption after that?
No difference. Still same consumption abt 10l/100km, ML, R19 AT tires
@@f0llower but at lower RPM it has more power
@@amdfan1974 that's debatable, it's always leaking boost and oil, that's why everyone is taking them out.
Trop d'air
Allen headed bolts would have looked nicer....but well done
Very magnanimous of you :>)
They are not visible from the top of the engine
i did this and drilled hole thought the socked part, then secured the bolt with a stailess steel wire so they cant turn loose