Exciting presentation! Wonderful work! Wasn't exactly what I was expecting, but in a very good way! This ended up being a masterful work of art as it turns out! Very well done! Great job! Can not wait until your next one! 👍
Ha ha. Just laughing at the dust extraction fitting. That’s exactly what I did. Had to take all the bolts off again to get it on. Should have read the book 😝
Got this table yesterday and wish I had seen this video earlier: the instructions for assembly are really terrible as you pointed out 😂Also some of the screws for the metal frame just were not long enough to use the front hook or even a washer. Anyway, so far I really like this table and got it for a very good price, so there is no need for me to make one on my own. The edge planing feature is nice, too. Anna
I’m really surprised by all the comments about trends products being so bad. I’ve used trend stuff for 20 plus years and always found it very good. The wrt booklet literally shows a break down of what parts you get and how many of each. Then tells you which bit and how many of them you need for each stage of the assembly. 🤷♂️🤷♂️ really not sure what they could do to make it easier. It’s like a Lego building I’ve always thought🤷♂️🤷♂️
I have that Trend Insert on order and intend making my own table to sit in my Tip Over Assemble Table. Thanks for the review, i will base my new table on the Trend one... Subscribed and liked..
paultay23 Many thanks for subscribing. I’ve used the router and table a lot by now and I like it. The insert with the T11 router is awesome. I think you will be happy with that setup 😊
Just got a little excited when I seen you were working on a fly net would love to see a video of you making that something I’ve always fancied doing myself but I’ve never got round to it
Great video. The instruction booklet is awful, I agree- in fact all of Trend’s documentation is poor I think. I’m new to their equipment- their tools feel quality, I wonder why they didn’t spend much on instructions! It would help get more from their tools...
Thank you Magnus I was thinking of making a router table for quite a while, but I realized that buying all the parts I needed wouldn’t spare me any money in the end. So I decided to save me som time and got this table instead. The router is really awesome. It is both smooth and powerful. It takes 8mm, 12mm and 1/2” bits. And the height adjustment in level with the table top makes it ideal for a router table 😊👍
Great table, but says it fits all trend routers. I bought a Trend T7 Router to fit it, and holes do not match. Having to drill my own is disappointing.
Hej Emil Ja jag är väldigt nöjd med bordet. Det är egentligen inget som jag upptäckt att jag stör mig på. Det är lite skrymmande, men har man platsen så är bordet toppen. På sikt kommer jag nog bygga någon utdragslåda under bordet för lite förvaring av tillbehören :)
@@dscraft6358 toppen, det blev faktiskt att jag beställde den lite mindre bänk varianten och så skall jag bygga en väggmonterad hylla till den. Jag har inte världens största snickarrum så jag insåg att det större blev lite för stort.
I am setting up my new shop now and this time I finally have room for a dedicated router table. So I’m just wondering where you got the router table from? They’re not that easy to come by in Sweden. Or maybe I’m just looking at the wrong places. Thanks for a good show! /En till hobbysnickare
The router is compatible with the WRT and CRT Mk3 tables ( since they use the same aluminium insert plates. You will however need to re drill the holes in the insert plate to match the holes on the router. Hope this helps
Hate the music and far too fast. Why not talk us though it as the instruction book is hopeless Trend are no help at all, so I had my hopes on this. Bugger!
Exciting presentation! Wonderful work! Wasn't exactly what I was expecting, but in a very good way! This ended up being a masterful work of art as it turns out! Very well done! Great job! Can not wait until your next one! 👍
Thanks mate 😊
Ha ha. Just laughing at the dust extraction fitting. That’s exactly what I did. Had to take all the bolts off again to get it on. Should have read the book 😝
Got this table yesterday and wish I had seen this video earlier: the instructions for assembly are really terrible as you pointed out 😂Also some of the screws for the metal frame just were not long enough to use the front hook or even a washer. Anyway, so far I really like this table and got it for a very good price, so there is no need for me to make one on my own. The edge planing feature is nice, too. Anna
great review this helped me a lot. Thanks my friend!
Thank you! Glad you liked it :)
@@dscraft6358 i realy do! i just hit that red button for you because i think you have a great channel and i can learn a lot from you
@@christofix And I did the same for you mate, thanks a lot. You got a really nice channel
@@dscraft6358 thank you so much man! i realy appreciate it
You are right - the instruction manual to assemble it is terrible!! In fact some instructions are wrong... Your video helped a lot. Thanks
Charles Fraser I’m glad that you found my video useful 😊
I’m really surprised by all the comments about trends products being so bad. I’ve used trend stuff for 20 plus years and always found it very good. The wrt booklet literally shows a break down of what parts you get and how many of each. Then tells you which bit and how many of them you need for each stage of the assembly. 🤷♂️🤷♂️ really not sure what they could do to make it easier. It’s like a Lego building I’ve always thought🤷♂️🤷♂️
The Trend products are not bad at all. I really like my Trend router and the table. It's just the assembly instructions with this table that sucks 😀
I have that Trend Insert on order and intend making my own table to sit in my Tip Over Assemble Table. Thanks for the review, i will base my new table on the Trend one... Subscribed and liked..
paultay23 Many thanks for subscribing. I’ve used the router and table a lot by now and I like it. The insert with the T11 router is awesome. I think you will be happy with that setup 😊
Just got a little excited when I seen you were working on a fly net would love to see a video of you making that something I’ve always fancied doing myself but I’ve never got round to it
Thanks for your comment. I can do that, that’s a great idea 💡👍
Brilliant looking forward to it👍
Great video. The instruction booklet is awful, I agree- in fact all of Trend’s documentation is poor I think. I’m new to their equipment- their tools feel quality, I wonder why they didn’t spend much on instructions! It would help get more from their tools...
It sure is awful. But the tools are great. The T11 router is a monster, it handles every thing I throw at it 😀
Hey Matey…
I have the same router table, where did you get the 100mm to 60mm reducer for the dust extraction???
Cheers
Nice! I've been thinking of making a router table for a long time now, but this would be a good alternative. Are you happy with the router?
Thank you Magnus
I was thinking of making a router table for quite a while, but I realized that buying all the parts I needed wouldn’t spare me any money in the end. So I decided to save me som time and got this table instead. The router is really awesome. It is both smooth and powerful. It takes 8mm, 12mm and 1/2” bits. And the height adjustment in level with the table top makes it ideal for a router table 😊👍
No making a table would be the alternative . Buying a proper one is better i have this trend table its brill after i modified it
Bonjour J'ai une défonceuse TRITON TRA001 peux t on la mettre sous cette table ?
Great table, but says it fits all trend routers. I bought a Trend T7 Router to fit it, and holes do not match. Having to drill my own is disappointing.
I did the same, disappointing to say the least.
Hi do you have a link to the type of table & also make of router you are using
Thanks
Bri
Snyggt. Vad gav du för den?
what kind of tools are needed - metric or imperial?
Trend CRT/MK3 240v CraftPro Router Table MK3
Does anyone know if Hitachi M12VE is compatibile with this router table please?
Hi, thanks for your review, does the table and insert plate come with the height adjustment mechanism.
Hi and thank you
The table has no height mechanism but the Trend router does, a built in fine adjustment that works superb
Hej, efter att ha haft fräsbordet nästan ett år är du fortfarande nöjd med det. Funderar på att köpa ett lika dant.
Hej Emil
Ja jag är väldigt nöjd med bordet. Det är egentligen inget som jag upptäckt att jag stör mig på. Det är lite skrymmande, men har man platsen så är bordet toppen. På sikt kommer jag nog bygga någon utdragslåda under bordet för lite förvaring av tillbehören :)
@@dscraft6358 toppen, det blev faktiskt att jag beställde den lite mindre bänk varianten och så skall jag bygga en väggmonterad hylla till den. Jag har inte världens största snickarrum så jag insåg att det större blev lite för stort.
@@emilwilleson4538 Härligt. Jag tror du kommer bli nöjd :)
I am setting up my new shop now and this time I finally have room for a dedicated router table. So I’m just wondering where you got the router table from? They’re not that easy to come by in Sweden. Or maybe I’m just looking at the wrong places. Thanks for a good show! /En till hobbysnickare
Hi, I bought mine from ffx.co.uk. Hyvlar.se are selling Trend in Sweden but it was almost half the price to order it from England
Tack så mycket för tipset!
OTWW Det var så lite så 😊
hi there, do you think this router table/insert plate will be ok for the triton routers? MOf001
The router is compatible with the WRT and CRT Mk3 tables ( since they use the same aluminium insert plates. You will however need to re drill the holes in the insert plate to match the holes on the router. Hope this helps
Hi. I think it will work. But you might have to drill new holes that matches the Triton router 🙂
Hate the music and far too fast. Why not talk us though it as the instruction book is hopeless Trend are no help at all, so I had my hopes on this. Bugger!
You can always mute the music and slow down the speed by clicking on the gear symbol. Any part in particular your struggling with?