Mountain Bike Maintenance: How to fix spongy disc brakes
HTML-код
- Опубликовано: 11 сен 2024
- This is a quick and easy way to firm up your shimano brakes if they are feeling a little spongy.
Follow me on Instagram / thegoodsmtb
Here’s everything you need
Shimano mineral oil amzn.to/3d0mMSK
Funnel tool amzn.to/2A74aBO
Complete kit amzn.to/2zoD60U
My gear
FOX PROFRAME HELMET amzn.to/36yy12s
OAKLEY DRT 5 amzn.to/2WVznky
FIVE TEN FREE RIDERS amzn.to/2LWPeZH
GOPRO HERO 8 BLACK amzn.to/2ZyQUR5
HERO 8 WINDSLAYER amzn.to/2ZuhF9v
DAKINE HOT LAPS WAIST PACK amzn.to/2XwalaW
DEMON ENDURO KNEE PADS amzn.to/2LSyT8j
MUC OFF CHAIN LUBE amzn.to/3ebDKhd
WPL FORKBOOST amzn.to/2TC2vLH
MULTI TOOL amzn.to/2Twq2xh
FLAT PEDALS amzn.to/2LWxQUU
GRIPS amzn.to/2WXcLQu
MECHANICS STAND amzn.to/3d5sBhW
FRONT TIRE amzn.to/3bVuc8B
REAR TIRE amzn.to/2yyZKn6
TIRE SEALANT amzn.to/3d1VdbF
Maybe the best short vid on the subject I've seen, very helpful....thank you
I subscribed because: a) Very informative b) great quality c) great execution d) straight to the point - A +
I've had best results doing this with the bike on the ground. Lift the bike a couple of inches and let it drop to the ground whilst keeping everything upright, that really gets a lot more air pockets out of the hoses.
tapping your hoses gently from the rear derailleur all the way to the front helps as well
I searched like a dozen videos to get this. Thank you @thegoodsmtb I will follow and support. Much Love.
Me too
Love the last helmet to the right in the background. 👍🏼
It’s a good lid indeed
Despite multiple bleeds and top-off, mine is driving me bonkers. Gonna follow this advice.
Ended up having to get a replacement brake sent from the bike company. Original one just could not be made right.
@@VideoNOLA lol
Excellent little vid, I'm saving this for future reference as I don't think my bike shop has been doing this properly.
Now I've bought my self a brake bleed kit online and will do it my self. That way I can't complain at anyone but me.
Also thought I had mechanical brakes turns out no they are mineral oil 😂😂 so it was good I watched this video or I would have continued to look at incorrect videos.
Noice 👌
seemed to work really well for me. Riding tomorrow see how it holds up and report back!
Hopefully it did the trick!
Did it work ?
1year later no report (must have died)
@@hallacki he went 90kmph down a hill intro a red light before testing if they worked properly. He found out
You still alive bro?
Thanks you for using a tripod
Nothing worse then shakey one handed cell phone videos
Eugh eugh eugh facts
Thanks for informative video. I needed this info.
I am extremely grateful for this video dude. I appreciate you sharing somehing so smart and easy lol! Im glad for now i don't need to do a full bleed i can get those bubbles out safely. Thank YOU bro!
Thanks for the video, worked great on my spongy front brake.
Thank you man, this helped a lot, back brake is working again!
You need to put a brake pad block, or otherwise you will put too much oil in the system. Doing just the burp at the lever just advances the pistons due to over filling, making you think that lever travel is less.
Preesh! Your video got me set and riding quick!
Rad!
Awesome bud bro. Made it super easy to follow and adjust! 👊
I’ve tried the same thing with mine but every time I’m on a hill or do a wheelie it gets really spongy again. Any advice?
Re bleed them. It also might be the pads that are going out. If not, check your disk is straight
Thank you for the lesson
Very helpful video worked on my radius brakes
Thanks my front brakes went really spongy after I left my bike upside down
Same thing, brand new XT brakes, less than 10 rides. Left it upside down for 2 hours and the rear brake is spongy ...
@@asselinpower why
@@magnumllama400 that s because companies simply fill them with mineral oil without doing a proper bleed when they install the brakes.takes less time and costs less for them. Most of the time it creates small air bubbles that go up to the calliper when you turn the bike around.
@@asselinpower and what's the solution of that problem, also which companies are known for that mistake?
@@magnumllama400 a proper gravity bleed will solve this. They all do it unless the shop that sells you the bike bleeds it before delivery.
Just what i needed thanks!
Forget the brakes, teach me how to get those massive forearms
How to fix that clicking noise? I have the same problem. Also it's bleed and works but there's still a sponge feeling on it
Sir,i done all steps in this video,i flushed old fluid out then change it with new,but still,my brake leverage still so close to my hand,what do you think?,are the thickness of brake pads matter?,because im not changing the pads for a long time
you should make more vids, this was good
Thanks a lot, this video really helpful
Had no idea, thank you.
Do you know why when i put the oil in it leaks from somewhere near my brake pads
Cheers mate...👍
not help for me, still soft
Can anyone help me my breaks are doing the weirdest thing ever I have to pull in my breaks then pull it in again for it to work tight any help
Thanks for the video, solved my issue!
Great video thank you
Hey i just bleeded my back brakes , after the Level felt strong but after like 30min riding I could pull in laver completely and it was barely braking
You’ve either got a leak somewhere, or there’s more air in the hose that works it’s way up. You can try the funnel bleed a few more times but a full bleed would be quicker probably.
THE GOODS MTB okay thanks!
Im having similar problems a Giant Seek rear brake, Local GIANT shop Penang Malaysia I asked for Shimano mineral oil to bleed the brake. They "refused to sell" said they need for there use! Giant bikes are they that bad! 😱
Thanks for the help!
Was that a plunger or a plug?
Every time i changes my brake pads my levers start to get spongy is that normal ?
How does air get in? I did this protocol after brakes got spongey. It’s been hanging vertically all winter.
Hello, I’m new to your channel hope this will caught your attention.
I have problem with my Squeaky Sound when I brake (it’s at the back brake).
I have already cleaned the rotor , I have already changed brake pad, but still the same result. Still squeaky.
May I ask, does this has something to do with the Brake lever?
My left lever , it brakes smoothly and it’s bite on the rotor so good. Compared to my back , it’s still squeaky.
What causes the air to get in. I just did a bleed 3 months ago and my brakes are spongy again. Just replaced the rear pads. It's only my back brakes
Air can get in if fittings aren’t tight or 0 rings are missing, but it’s usually air from an incomplete bleed. The air could be trapped in the lever or somewhere and they feel fine until the air moves into the line where it causes sponginess.
With the rear wheel in too or can I use a bleed block
hamBRUHger you can use a bleed block if you’re wheel is out but as long as you’re wheel is in and the rotor is in the caliper you don’t have to do anything special.
I just did my rear with the weel in, no problems.
Thanks so much!
Thx for sharing nice and simple
Cool but I don't have that weird cup
Please do you have a vid how to fix the same problem but my back brakes like hard to press not easy 😕pls help
save me! Thank you. Its possible to "complete" the oil with other brand? I have a shimano system but i dont know which oil its on there, probabely its shimano aswell.
Diego Dneo if you have a shimano system it’s more than likely shimano mineral oil in there as well.
im pretty sure other oils will work just as well
Check your fluid reservoir, if is says mineral oil, you can use any brand as long as you use mineral oil!
i have old deore brakes, is it possible to upgrade only the levers to 2020 model but cable hose and calipers will retain?
thanks you so much
excuse my ignorance is this brake system any different from the steel wire system found on ordinary mountain bikes?
Yes. This uses hydraulic fluid to squeeze the calipers on to the rotors to stop the bike. Mechanical brakes use a cable that pulls the calipers on to the rotors.
Do you still get about 1 inch of freestroke before your brake bites? I'm trying to have just 1cm before it bites but don't know if that's possible...
That’s one of the problems with shimano breaks is inconsistent bite point. Haven’t measured my free stroke but there’s for sure some.
Nice bro!
Is it normal to have to do this every 2 weeks? It's so damn annoying
no matter what I do I get air bubbles and I have wasted enough oil bleeding my bike a couple of times
i'm starting to think the issue is the cheap chinese brakes it has
I got 8100s installed
Im in a position where if the brakes are close to my grip, and i one finger brake, it smushes my other finger.
I got the lever throw all the way out.
Do I need more oil in the line or something?
otherwise I had to scoot the brakes further away from the grip, but that also puts my shifters kinda far away.
What am I missing.
If I just 2 finger brake then Im fine but what the heck thanks?
I guess I can try this, I had them installed by shop.
Did you ever manage to fix it? I have the same issue
Nice!
what do you suggest if they're still spongey? I just installed a new set and the fronts are fine, no issues, but the rear is still soft.
Did you have to cut the rear? I just did the same thing and ended up doing a full bleed on the rear. You can try placing your bike vertical overnight and then doing this again. Sometimes that will move the trapped air. But chances are you need to do a full bleed.
THE GOODS MTB yeah, I had to cut the rear as well. Thanks for the info. I’ll try the vertical thing first. I ordered some Promax levers and calipers and I thought they were the same spec as Shimano but they’re just slightly larger and I don’t have the bleed kit I need. Matter of fact, I couldn’t find a bleed kit that fit at all. Calls for an M5 and M6 screw in syringe- no cups? If the vertical thing doesn’t work I’ll have to take it into the shop.
Thanks again- appreciate it.
@@cmculver I have the shimano and I'm having the same issue. I've bled them 2-3x and still no luck. My bike is currently sitting vertical and will burp it tomorrow.
Did that end up working for you or what was the issue?
OH IT'S A HARDTAIL not really- I’ve bled the brakes on both of my bikes here recently and everything is still spongy. I’m letting air in somewhere. I talked to my local bike shop and they just said that it’s tricky, to try it 2-3x so idk. Good luck.
@@cmculver damn that sucks. Hopefully you figured an maybe thos 2-3 more times help. Thanks you and likewise.
Hi mate I’ve had a new bike and had to take rear wheel off for transport, I’ve put it back on and rear brake seems spongey. Still works fully locking the wheel when it’s engaged but seems a lot less solid than before! Would this be the solution? Cheers
If you’ve tried squeezing the brake multiple times and it hasn’t improved then there’s a good chance there’s air in the line and this could help. Sometimes if you put your bike upside down trapped air will move around in the line causing the spongy feeling. If it’s a small amount of air this will work.
I had the same problem I’ll try this though
THE GOODS MTB I’ll give it a go, thanks for your reply bud
Hi mate my bled my brake on the rear as it didn't work it now. Works but goes spongy any ideas?
Daniel Watt were you getting air bubbles out of it when you did it? If it worked for a while then went spongy again, you either still have air in there, or you may have a leak somewhere.
Mine is always spongy when I wake up in the morning.
I just can't get my rear Magura MT8SL's to bleed properly. I've done it 9 times. All the Magura videos, non-Magura videos, etc. When I'm done, rock hard, then after about 10-15mins or riding it's spongy again. What I find is weird, is that I can simply stand my bike on the rear wheel, pump the brakes a few times and then they are good. 10-15mins later, same and I repeat. It will never get firm if I try to pump with it level on the ground. I don't think it's leaking, because I rode for a month using that re-firming technique and it always worked. I feel if air was coming in, then at some point, that would no longer stiffen up the brakes. Damn you air bubble.....how do I get you out!!!!
I think you either have a leak or significant air in the line. If in were in your shoes I would do a full bleed with a syringe at the caliper
I have a y flicker carver c5 and I want to fix the spongy brakes. Is this the vid for it? because I cant find a y flicker video for it
I have no clue what y flicker is
What if i put regular vegetable oil insted of mineral oil can i do that?
@@user-ff3cq7km2c I wouldn’t use vegetable oil……
So I just purchased a new bike was fine but on the way to work I pulled the brake it went spongey now I have to pump the brake to get pressure on the lever
You’ve got air or a leak in the system. If there’s fluid near your hose connection on the lever or caliper you have a leak. If not you have air and if this doesn’t work a full bleed will take care of it.
@@THEGOODSMTB thank you
Does this work for SRAM brakes
Can I do this with my sram guide brakes using the bleed syringe tool instead of the funnel? Or is the funnel universal?
The funnel won’t work on sram brakes.
Didnt work on mine...might need new pads
Yeah this won’t do much if there’s no material left on the pads
Can this just be done often and completely eliminate the need for a full bleed?
As long as your fluid isn’t dirty and there isn’t excessive amounts of air in the system, it does a pretty good job of making brakes feel good.
Niiiice bro 👍👍👍
💯
m8 do I need to take the tire off or put a bleed block in before doing this. Thanks
You don’t have to take the wheel off. But if you choose to, then for sure use a bleed block.
@@THEGOODSMTB 👍
Just got a brand new Giant Stance 1, rear brake is super weak and it doesnt offer much confidence going downhill... this a possible solution?
Does it have good bite on the rotor? It’s possible a new bike has air in the lines but probably not super likely. It’s also possible if it’s a brand new bike the pads and rotors aren’t bedded in yet/properly. Switching to metal brake pads can add power.
@@THEGOODSMTB Seems like the bite is good. Every once and a while I get great brake power. Other days I cant even lock them up on dirt. Almost like there is something on the rotor but I cleaned those as well. Ill try different pads first.. have considered dropping a couple hundred on new brakes though.
doesn't work for magura mt sport brakes
I just installed deore m6100 brakes and they feel... Weird. They're not spongy in a normal way: as you press the lever, it arrives at the biting point and you can hear the pads contacting the rotor. BUT if you put just a bit more force the lever will keep to go in, and quite a lot before becoming too hard. I don't know why and how but this seems to be affected by the reach adjuster too: with the reach fully out (wich is too far for my preferences) the lever feels a bit more solid. But with the reach that I like to use (2 turns and 1/4 from fully out) the problem intensifies. It doesn't seem to affect power that much, compared to a friend of mine's xt brakes mine have the same power, if not a touch more, but his lever feels a lot more solid. Oh btw the problem is a little bit worse on the rear brake. What could I do? I already quick bled them 2 times, and while some bubbles came out from only the rear brake, it's still far from perfect.
Did you have to cut the rear to install them? Might have too much air in there for a quick bleed and you may have to do a full bleed. But what you’re describing sounds like the free stroke. On XT brakes you can adjust the free stroke which is essentially the bite point in relation to lever pull. I don’t believe you can adjust it on Deore brakes.
@@THEGOODSMTB on new Shimano brakes the hose comes separated from the lever so you just cut it to the appropriate length, put the insert in and screw it in the lever. With the rear brake I forgot to put the rubber boot tho so I had to cut the hose again. I don't think I got that much air in it, but yeah probably that's the problem. But the front brake also has this problem, it's less noticeable but there still is. And yeah you can't adjust the free stroke on deore brakes, well you technically can by overbleeding/under bleeding the sistem but I didn't do any of that. Also my buddy doesn't even know what free stroke adjustment is so I bet he didn't m touch that neither
@@THEGOODSMTB probably a full bleed is the only solution. Unfortunately I can't do it myself and neither can my bike shop, since they refuse to work on whatever product you didn't buy from them.
A full bleed on Shimano brakes is pretty easy to do.
@@THEGOODSMTB I don't have the tools thought. I may buy them, but I still don't want to risk to mess things up. I could "practice" on my old brakes
I turned my bike upside down to install new brake pads now I have no pressure in the front brake lever? Any suggestions please? Thanks
Sounds like you have air in your brake line. When you flip it upside down the air moves and causes the sponginess. This method may help you but you might want to do a full bleed eventually.
@@THEGOODSMTB thanks for getting back to me,it was weird, the brake was working before only a little to harsh,then nothing!, there was minimal effort to achieve full pressure before,but the pads are squeaking terrible and loudly.any known causes for that? Thank you 👍
New pads generally have a break in period. Squeaking could also be caused by different materials in the pads, some are resin, some are metal, some have combos.
@@THEGOODSMTB thank you my friend, I will take a look over the weekend and will follow your video, they're old XT brakes so I have a feeling that the oil needs topping up for starters,plus the fact that 1 brake has a sweet amount of pressure before the wheel locks, the Dodgy lever before I got the air lock seemed too stop instant, thanks again for suggestions, I'll try and let you know, subscribed & liked 👍👊
Thanks bro!
Thats the front dude
Where can I get the Shimano hydraulic mineral oil?
Most bike shops and online stores including amazon carry it.
I’m enjoying the bike so far ruclips.net/user/postUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA My only real complaints are the brakes and the pedals. I feel like a bike designed for bigger people should have much larger pedals and more heavy duty brakes. I’ve only gotten two really good rides out of it, minimal downhill action, and the brakes feel like they’re already going out. A larger person has more momentum, so I think this wasn’t thought through very well. Also, I wear size 13-14 wide shoes. My feet cramp up on these pedals that are clearly made for smaller feet. Since I’m not a pro rider (and I don’t think many are who purchase this bike) I don’t think that the straps on the pedal are necessary at all. None of this takes away from the enjoyment I get from riding, however. I’ll just head to a bike shop to improve on a few things.
Can you do this with SRAM brakes as well?
tecknique171 sram bleeding is a little more involved. You need syringes and they use DOT brake fluid instead of mineral oil. Not as easy to work on but still doable.
Hello thank you for your video! I have the exact problem you describe but when I followed your instructions it didn't really change anything with the handle being spongy or it coming all the way down to the handle any other suggestions?
Bleed it at the wheels.
I don't have a bleed cup any tips
gotta have the cup they sell em on amazoon for 20
but where do we get that funnel n all?
You can get it at a bike shop or Amazon/eBay
@@THEGOODSMTB ookay thank u kindly good sir.
Do you remove your break pads while doing this ?
I don’t. Just be careful with the mineral oil. If you remove your break pads make sure to use a bleed block.
Will it not lock the brakes if you did not remove the pads?
Derick Macariola if you leave your wheel and pads in then no it won’t. No difference than normal brake use. If you remove you’re wheel then you need a bleed block.
i did this and after a day of riding, my brakes are spongy again
Sounds like you got a good amount of air in there. When you ride it will knock trapped air loose and into the system. You can either keep doing this or do a full bleed.
can ido this with tektro brakes ?
I’m not 100% positive but I think tektro May require the 2 syringe method similar to sram.
Does it still bit spongy when you done bleeding? Mine is bit spongy and I can pull it through the handle bar
Ive bled the ever-living crap out of my shimano brakes and cant seem to ever get a good feel from the rear brake. Ive tried a gravity bleed, bubble bleed, syringe with push/pull. Still feels like crap. getting ready to cut them off.
what can i use as a substitute for shimano oil, like something i have around the house
I’ve heard of people using normal mineral oil with docent results. Shimano mineral oil is cheap enough and that’s what i would recommend. You more than likely void any warranty by using anything other than Shimano mineral oil.
Aaaaaah
I still havnt found a mechanical one all of em is hydraulics
Here you go ruclips.net/video/NmqGeLNcVIg/видео.html
why ur shirt so hairy
Cause I turn in to a wolf on full moons
$200 at the shop for fixing it
can get done at mine for 25 lol you be paying them jews stupid money hahahahhahahahah
Wtf does spongy mean
This guy has a white cat.
do u have a dog or cat?
Yes
Thank you.
Thank you. Helped me massively.
Will this process wont lock the rear brake?
Derick Macariola no