Vauxhall/Opel Zafira 2.0 CDTi DPF faults, no power... Fault finding and repair.

Поделиться
HTML-код
  • Опубликовано: 28 ноя 2024

Комментарии • 64

  • @matejanosvarga4478
    @matejanosvarga4478 Год назад +2

    Good Job Luis. Sometimes it is refreshing when this "just cruising along" type of repair is all what's needed, rather than chasing wires and taking things into bits to access awkwardly located parts 😉

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +1

      Absolutely...
      Unfortunately it not always like this...😋
      👍👍👍

  • @miketherefurbisher8000
    @miketherefurbisher8000 Год назад +2

    Always a great video from you Luis (I learn all the time watching you) Thank you 😀👍

  • @neilmurphy845
    @neilmurphy845 Год назад +2

    That glow plug came out very easy

  • @zodiatti1825
    @zodiatti1825 7 месяцев назад +1

    Hi Luis I have a diesel Swift 1.3 DDis with DPF, one glow plug is broken and I have noticed that DPF regeneration now takes much longer and happens more often. I am not sure the DPF regeneration and soot accumulation occurrence have anything to do with faulty glow plug but I thing yes. At least based on this video and I guess glow plug operates during acceleration as well not only before engine start. So I can imagine a worse soot formation on that faulty cylinder that can cause more frequent DPF regen request. Am I wrong? No DPF related error code only faulty Glow plug and can be felt on uphill drive kind of not as quick as before feeling... very tiny power reduction almost non sensible one... Now I look a garage to replace it as I do not have mood to break my glow plug into the head :) I could buy a thin wall 10mm wrench but no thanks :)

    • @LMAutoRepairs
      @LMAutoRepairs  7 месяцев назад

      Most modern diesel engines will need the glow plugs not just to start when cold...
      Yes, they are used during regenerations, when the engine us running "cooler", etc...
      It all depends on the engine strategy...
      I would focus to have that glow plug sorted before anything else...
      👍👍👍

  • @neildean7515
    @neildean7515 Год назад +1

    Good morning. A great video, but, how did you know it was doibg a DPF Regeneration??? Was there a light or was it the data on your scan Tool. Crazy that the garage changed those parts, but didnt notice the Glow plug issue..

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +1

      You can monitor on the scan tool when a regen is happening...
      👍👍👍

  • @user-jg6vw3em9f
    @user-jg6vw3em9f Год назад +2

    Hey Luis,
    Great video as always! Superb talent for diagnosing car problems.
    I'm no car mechanic but wouldn't have been advisable to change the whole set of glow plugs? Would be cheaper and far cost
    effective in preventative car maintenance?
    Cheers
    😀

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +1

      Well, normal glow plugs, I would definitely advise... these they cost over £100 each...
      So, I would say to replace them when they fail... who knows the others might last another few years...
      That said, the owner could well get me all 4... but he didn't, I guess after he realised how much they cost...😋
      Hope it makes sense...
      👍👍👍

  • @giorkar2116
    @giorkar2116 Год назад +3

    Hello sir!! Can you please inform me about the pressure milibars in the dpf are in a good healthy diesel car?at Idle and with load when we accelerate? You say at idle below 10?10 is the max at idle? And on acceleration? I want to have a base in my mind to compare in a healthy diesel engine. Thank you very much!

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +2

      Each car is slightly different...
      But yes, idling I would look at below 10... under load close high rev, let's say 4k rpm I would not like see more than 100 or so...
      But again, each car is slightly different... this is just a starting point...
      👍👍👍

  • @tonykollar6870
    @tonykollar6870 Год назад +1

    Im experiencing loos of power after 2500 rev....new turbo fitted bh mechanic ...is there something these engines are prone known for?

  • @dannythackray4898
    @dannythackray4898 Год назад +1

    How much do you charge for vauxhall corsa d flight air bag light and to fit please I know I got a broken wiring under drive seat I fit that but no still staying on

  • @temokortava9703
    @temokortava9703 7 месяцев назад +1

    Hi, have same problem on 1.6 cdti, mileage is 190k km. 4 glow plug malfunction, after engine start dpf appears and 5-10 min from cold start limp mode, last regen 1600 km before.
    thinking new glow plug is solution, Although all mechanics in my country says thats no way glow plug impact on regeneration.
    thanks for video :)

    • @LMAutoRepairs
      @LMAutoRepairs  7 месяцев назад

      Glow plugs are important for the regenerations... though it all depends on the car strategy...
      I would sort the glow plugs and would go from there...
      👍👍👍

  • @MattyEngland
    @MattyEngland Год назад +1

    Thanks for another great video Luis.

  • @clueless6559
    @clueless6559 Год назад +1

    Worth mentioning these psg glow plugs are easily damaged if not removed with the correct tools as i am sure were used here by Luis,👍

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +1

      ☺️
      👍👍👍

    • @mbz4652
      @mbz4652 Год назад +1

      What are the appropriate glow plugs tools for these particular glow plugs?

  • @mattshifu
    @mattshifu 6 месяцев назад +1

    I have a 54 plate 1.6 cdti.. Occasional cuts out when I come to junction when I put my foot on clutch. If I gonon motor way for a bit sorts it but regent does not come up unless I leave it then it does and do regent and all good but this keeps happening

    • @LMAutoRepairs
      @LMAutoRepairs  6 месяцев назад

      Have you scanned the car?
      👍👍👍

  • @craighopkins868
    @craighopkins868 Год назад +1

    Hi there, havong the same issue. Have the P2458 fault code. Regen duration fault. Jist wondering how you clear this fault.

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +1

      Check that all the parameters for a successful regeneration are being reached and met... if one or multiple are not, the regeneration might takes longer than it should, and might be aborted causing that fault...
      Check live data during the regeneration... make sure you have no faults that can affect the dpf system...
      👍👍👍

    • @craighopkins868
      @craighopkins868 Год назад +1

      @@LMAutoRepairs thanjs for your speedy reply. Only problem i have now is the car has gone i to limp mode and cant get any decent speed. Every time i go to clesr fault code comes back in a matter of seconds.

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +1

      @@craighopkins868
      Again.... check live data etc... something else if making that to happen... your answer most likely will be on that live data...

  • @electronic7979
    @electronic7979 Год назад +2

    👏👏👏

  • @jackiemay9471
    @jackiemay9471 Год назад +1

    good morning luis swaptronjcs for the win

  • @walideamine9540
    @walideamine9540 Год назад +1

    Hello I want to buy autel which one you advise me to buy and thank you so much ❤️

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +1

      Depends on your budget...
      They have a tool for most tastes and budgets...
      Have a quick look at their website...
      👍👍👍

  • @neilmurphy845
    @neilmurphy845 Год назад +1

    What's the point on using fancy glow plugs the old ones seem ok

    • @timbo19751975
      @timbo19751975 Год назад +2

      Used for cylinder balance, timing advance (quietness) and also limiting fuelling under certain conditions.

  • @clive3076
    @clive3076 Год назад +1

    And thank you for another great video

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      And thank you for watching!...
      👍👍👍

  • @atbou6400
    @atbou6400 9 месяцев назад +1

    Thanks

  • @wackey3455
    @wackey3455 Год назад +1

    thanks you so much for a great video

  • @Wilksey37
    @Wilksey37 Год назад +5

    Fuel needle is broken, shows over half a tank, we all know you only accept cars running on fumes 🤣🤣

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +3

      Those are the best ones...
      😅
      👍👍👍

  • @marcelh2341
    @marcelh2341 Год назад

    19:44 16-17 kPa are just 0,16-0,17 bar! 1 bar = 10^5 Pa.

  • @mothanagharbe513
    @mothanagharbe513 Год назад +1

    Good morning bro
    You are awesome

  • @joaomachado4056
    @joaomachado4056 Год назад +1

    Tks for the vídeo.

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      Thank you for watching!
      Obrigado!
      👍👍👍

  • @mantaskozikis6276
    @mantaskozikis6276 Год назад +1

    Great video 💪👍

  • @anapaulapereira3255
    @anapaulapereira3255 Год назад +2

    👌👍

  • @tomnone8378
    @tomnone8378 Год назад +1

    Another perfect job :)) keep going...

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      ☺️
      Thanks!
      👍👍👍

    • @tomnone8378
      @tomnone8378 Год назад +2

      @@LMAutoRepairs when you starting selling tools for the cars :)) no bloody phones covers even test light will be nice with ur logo:))

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      😅
      Never thought about that... lol

    • @tomnone8378
      @tomnone8378 Год назад +1

      @@LMAutoRepairs r u fixing the cars or phones??!!! Haga

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      🤪

  • @mrgrumpy5116
    @mrgrumpy5116 Год назад +1

    😊👍

  • @walideamine9540
    @walideamine9540 Год назад +1

    Hello I hope to reply when subscription expired can I do online coding mk908pro