Toilet Install With Flange Sitting To Low Start To Finish
HTML-код
- Опубликовано: 2 май 2024
- Toilet Install With Flange Sitting To Low Start To Finish. The best way to install new toilet is to make sure there is not a low toilet flange. This toilet flange repair using extender rings works to prevent a leaking toilet how to raise toilet flange. Subscribe here :ruclips.net/user/ThatFixItGu...
Closet Flange spacer link: amzn.to/3FAwXxL
Mini Hacksaw link: amzn.to/3YzxcQc
Clear 100% Silicone Link: amzn.to/42mIlHa
Hollow shaft nut driver set link: amzn.to/3bEUzA2
12’’ Toilet supply line link: amzn.to/3lpw5oM
3 1/2 long toilet bolts link: amzn.to/3lmpmfa
Clear siliconized caulk link: amzn.to/2xAd9KN (For Base)
(Amazon Affiliate Links)
Follow us on Facebook: / ufix247
We love helping people and hope that we are doing that!
Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license
(creativecommons.org/licenses/...)
Artist: audionautix.com/
00:00 Introduction
00:20 add silicone to flange and spacers
01:23 secure with brass screws and long closet bolts
01:45 install wax ring
02:03 set toilet in place
02:50 secure toilet
03:18 saw closet bolts down so cover fits
03:51 install toilet tank
05:07 install water supply line
05:58 test the flush and for leaks
06:30 install toilet seat
06:53 siliconized acrylic caulk base 
Развлечения
![DRAGON BALL: Sparking! ZERO - Master and Apprentice Trailer [BUDOKAI TENKAICHI Series]](http://i.ytimg.com/vi/wNf7A4rHczc/mqdefault.jpg)
you got lucky that you could use a hose just the right length my new technique is turn valve to 90 degrees to right and put on longest hose so the extra goes behind toilet where it stays out of sight and clean. then i never have wrong length of hose LOL
That is a good call Greg. I will remember that. Thank you.
Great video, but don't add caulking at the floor. You want to see a flange leak if it happens.
Best video I have ever seen on this repair. Thank you!
I wish more people made videos like you too the point and easy to understand well done sir
easy to try
Question are u drilling in floor?? Not into pipe right??
Ok today i installed 2 of thoese homedepot ruber things that have a wax ring attach to them. My flange is aboit 1/4 to 1/2 below my floor since they added lvp over tile. Id i wanna add 1/2 flundge spacers do i need to rwinstall a new wax ring under thoese rubber thingys? Does it mater what silicone i use?
My existing closet flange is metal. Do I have to remove the screws and line it up with this spacer then screw it on (holes don’t line up)?
If I leave existing closet flange in place, how would the screws go through the metal flange?
When do you add more of the rings vs. getting the extra ring wax?
The flange should be sitting on the finished floor. About 1/4-3/8 above the finished floor. You could do either. Double wax it or add spacers. I say when you get past using 2 rings you should add spacers.
Every flange around here is installed on the sub floor.
This version is even better than the first one. More complete. I also liked how you left the hunt for the washer in the video. That is real life there. 😅 Were you standing in the tub? 😂 👍🏻
Lol. Yeah I shot from the tub. Not my favorite space, but it worked out great. It’s why I always try to preach knee pads. Such a life saver in the long run.
I’ve never had a video do what this did. I started laughing and said people had to think I was crazy putting that out. 😂
Just another suggestion: put the supply line on the valve before you put the tank onto the toilet because usually it's almost impossible to tighten it after the tank's installed .
Right on. I have never thought of that. Thank you.
seems like i have seen this before LOL do you ever use those foam rubber rings instead of the wax? the first one i tried kinda fell apart i am trying another brand now since i was only putting toilet down temporarily while fixing bathroom up then was going to pull toilet and put in a new floor.
I have wondered about the rubber foam gaskets, but just use wax. They seem to be quite expensive compared to wax. Another reason I have stuck to wax.
ran into a lop sided flange and in cement covering part of it , which flange do you use , how do you fix a lopsided flange ? (this is my own toilet) i had to chip the cement off the other toilet to get it back on.
I would chop that off and put a new one on for sure. If possible maybe use a twist in flange then screw it into the cement.
Did you use a regular standard size wax ring or did you use the extra thick wax ring ?
Regular size wax.
Is it a bad idea to grout around the flange to prevent leaks from messing up the subfloor? I'm guessing if you have to replace the bottom flange, that's gonna suck removing grout.
I'm leaning towards grouting it 'cause I'd rather hate my life removing grout than having a rotting subfloor lol
Grout it in bro. There is nothing wrong with that at all. Anything to keep it from leaking below and showing the leak above is always a great call.
👊😎
Thank you
Smh
This is a repeat.
It is but the other video was only have the job. It did not fully upload to RUclips. Very weird.
I like to take the nuts off after I cut the flange bolts. Just to recut the threads some.