Love the look of this install. I also really like the ability to keep the black plastic trim and fender liner! It is such a clean look!! I really hope they get them into production soon.
The moment I saw the max terrain fenders i fell in love with it. I have it pre-ordered since 2 months now from your website. I HOPE Rugged Ridge will ship them faster to you guys because last time i check you expect them July. Thanks guys. All love from Saudi Arabia💚
Thanks for doing this video. I have the American Adventure Labs High line light kit and did a modified chop to leave the inner most part for added strength, and have been a bit frustrated with the finish on the edge, your suggestion of using a sanding wheel should really clean that edge up for me.
Hey Rob, did you need to get the vehicle flashed and set the fender light settings to led, or do these simply work as soon as you plug them in if you have the factory halogen option?
Awesome! Just need them to come to market. As Alfred Quick said, my only complaint is the light to fender trim fit. It looks like it wouldn't have taken RR too much effort to match the curve perfectly.
They may make some adjustments to the fitment for the final release. Remember, these were a pre-production version that Rugged Ridge wanted to get some feedback on and help gauge better interest for when they bring them to market.
Great Video. What I don't understand why is the fitments not so great, specially where the metal end thing meets the plastic fender? Why couldn't they make it round like the fender is? That's just strange.
Those are awesome! Curious though, since you had Halogen lights and switched out to the LED lights, did you have to get a programmer to eliminate the rapid flash on the turn signals? How did you address this issue?
This is a good install video except I'm confused when you installed the LED lights onto the brackets. Per my instructions, you installed yours upside down. My LEDs were labeled L for driver's side and R for passenger side. That puts my flat side of the LEDs up and the curve side down. I verified this ny looking at the install pics that Rugged Ridge includes on their website in their installation instructions. Not sure it really makes any difference though.
I'd sure like to see Rugged Ridge clean up the contours of the light bracket to hug the corresponding contour where the fender gets trimmed and along the vertical side of the grill. There's no excuse for those not matching. C'mon!
Love it. Gorgeous color of the jeep. Does anyone know if I can lift my front fenders on my glafiator sport like they are on tge rubicon? I love how rubicon has them higher. Please let me know.
Great high quality production👍, helpful information as I’m about to buy a rubi this week. Can you tell me what camera 📷 you are using to make your video. I also have a channel and I’m looking for the best video camera. Thanks john
Hello. Can you please tell me yellow fog light you installed. Part number, make. Also will they plug play into the std gladiator Mojave’s bumper ?thank you. James.
Fog light related question. I have a halogen version on my 21 JLUR. Am replacing it with a OEM LED fog lights. Do you know if the connectors are the same between the halogen and led version. Also, do I need to get the Jeep programmed to tell it that I am using the led version now? Thanks
@quadratec Is there a reason I couldn't do this to an 80th anniversary gladiator? My fenders are the painted ones and appear to be the same as the rubicon ones as far as I can tell.
Does anyone know if rubicon JT front fenders will fit a stock JT sport model. I would liKe to have the extra clearance the higher rubicon fenders give.
Liked them when Wayalife featured them a while back,, still waiting to see them for sale.
Looks great. Can't imagine why Jeep didn't go with that as standard feature on all JLs/JTs
Would like to see a better fitment on the corner where the light meets back up to the fender
Looks great! I can’t wait until they are available for purchase and shipment. Great job on the install!!
Nice Job. Adding that Nut-Sert was pretty slick idea. Looks great!
thanks Rob! Lovin this chopped look. Can’t wait until this comes to market.
Love the look of this install. I also really like the ability to keep the black plastic trim and fender liner! It is such a clean look!! I really hope they get them into production soon.
The moment I saw the max terrain fenders i fell in love with it. I have it pre-ordered since 2 months now from your website. I HOPE Rugged Ridge will ship them faster to you guys because last time i check you expect them July. Thanks guys. All love from Saudi Arabia💚
Paint matched bumper looks great. This thing looks like a sema build. Great attention to detail.
Thanks! I'm really glad I got the bumper painted before installing it.
It gives it a cleaner look 👍🏼👍🏼 Can’t wait to they come out.
Love them,,loved'um when you preveiwed them at the show
Fantastic video and retain the factory look. Thank you 😊
Glad you liked it!
The fender chop and updated light looks great. Can’t wait to see these available.
I have the AAL fender chops and kept the inner fender and black moulding on my JL. Love the chopped look.
Could you please send some photos of that? Sounds great, could be even better seeing it ;-)
@@antmrod5198 on my ig: snow_meow_outdoors
@@antmrod5198 here's a decent install video: ruclips.net/video/HWKV8MJg3rU/видео.html
Love it. I can't wait until they come out
amazing look!!! amazing build so far!!! Look forward to the next video
Thanks for doing this video. I have the American Adventure Labs High line light kit and did a modified chop to leave the inner most part for added strength, and have been a bit frustrated with the finish on the edge, your suggestion of using a sanding wheel should really clean that edge up for me.
That looks absolutely freaking fantastic!!! Great job Rob!
Thanks!
Look amazing!
Next mod on my JL.
This looks fantastic! Love the chopped fender and light combo.
They look Awesome can't wait to get a set !!!
Looks amazing! I will be ordering for my JL :)
Good choice!
Definitely an add for my ‘19 Rubicon.
Looks great. When they come out they are going to need VERY explicit instructions. Great video.
I love them. I hope they are available soon!
Awesome video as usual. I really like this look. It's on my to do list!
they look great...they will be on the build list for "Jake" ...my 2020 Gladiator
Looks great
Hey Rob, did you need to get the vehicle flashed and set the fender light settings to led, or do these simply work as soon as you plug them in if you have the factory halogen option?
This is deff something I would like on my truck. Been waiting and still waiting
That is an awesome setup you get 4" convert it led and it looks better than oem 👍👍
Looks good!
I love the look. A must have mod for me.
Looks great!! Good job installing them!!
Imagine showing this jeep to soldiers back in late 40’s
Your Gladiator looks awesome
Awesome look that is well thought out
was planning on purchasing this. But if the LED burns out, do i need to buy the whole set up again or is it an easy light bulb change?
You gladiated the gladiator. 👌
They look sweet but should have an amber version
They are switch back LED lights. They illuminate white for the DRL function, and change to amber for turn signals.
@@Quadratec the amber drive lights look way more awesome could you guys make an all amber version?
Nice
thx for doing this. I'll be doing mine for sure. Very helpful.
Awesome looking
Awesome! Just need them to come to market. As Alfred Quick said, my only complaint is the light to fender trim fit. It looks like it wouldn't have taken RR too much effort to match the curve perfectly.
They may make some adjustments to the fitment for the final release. Remember, these were a pre-production version that Rugged Ridge wanted to get some feedback on and help gauge better interest for when they bring them to market.
I am ready to order a set when they become available.
They look sweet!
Looks great ! Installs quiet hard .
Great Video. What I don't understand why is the fitments not so great, specially where the metal end thing meets the plastic fender? Why couldn't they make it round like the fender is? That's just strange.
Great video
The turn signal isn't sequential, correct? They do look great!
looks sick!
Not bad but hope the released ones will have a nice curve to fit in the black trim better like oem
Those are awesome! Curious though, since you had Halogen lights and switched out to the LED lights, did you have to get a programmer to eliminate the rapid flash on the turn signals? How did you address this issue?
I have the same question.
Looks so good!! Take my money
I like the work you are doing. Do you have a consolidated link for all of the mods you have added?
Of course! You can check out all the parts Rob's installed here - www.quadratec.com/c/build-up/robs-2020-gladiator-rubicon-jt
When are they going to make it in the market? We want to buy one of those LED, It looks very clean and high quality.
This is a good install video except I'm confused when you installed the LED lights onto the brackets. Per my instructions, you installed yours upside down. My LEDs were labeled L for driver's side and R for passenger side. That puts my flat side of the LEDs up and the curve side down. I verified this ny looking at the install pics that Rugged Ridge includes on their website in their installation instructions. Not sure it really makes any difference though.
They should have came with a sequential turn signal... would've been a homerun !
Ok this looks pretty easy. How easy is it really and how easy is it to screw up
this is BADASS!
Love it !
Great video. What front bumper and what size tires on your jeep . Tyvm
Get these out I’m still waiting, my only other choice is adventure labs but these are much nicer
Hey Rob, any update on when/if these will be available? Thanks for the help.
I'd sure like to see Rugged Ridge clean up the contours of the light bracket to hug the corresponding contour where the fender gets trimmed and along the vertical side of the grill. There's no excuse for those not matching. C'mon!
I would buy them right now if I could
Great kit.
do you have a stencil for the kit that way you cut out the flares with stencil?
Can you do a install/review on the Rugged Ridge Venator? There isn’t one on RUclips yet!
These are a must! When are they available for retail?
Man, these look great! But stilllll waiting on a release date? Looks like I’m just gonna have to go for the Quake or AAL
Yes please, I keep looking for these on their website but
no dice
Awesome!!! 👍👊
My drl won’t turn on unless the parking lights or head lights are on. Any advice?
I need this for my gladiator please
Looks badass Rob! Is there anyway we can put this on my overland?
I want them!!
It's been a few years. Can you provide a link now?
look awesome
I would like a better fit at the cut, actually i would rather not cut it at all and just have a new piece provided for a seamless look.
Love it. Gorgeous color of the jeep. Does anyone know if I can lift my front fenders on my glafiator sport like they are on tge rubicon? I love how rubicon has them higher. Please let me know.
Sweet
So, will those JL fenders fit the JT?
Amazing 💪💪
Thanks 🔥
I learned about these from you but have to order them elsewhere because you have no stock.
Does this only work on the rubicon?
You get more clearance too ?
What’s the number for the led lights By diode dynamics
Can you do the fender chop with the max tow fenders?
I just got an 80th anniversary edition. It has the painted flare as well. Would something like this be doable, or is this just a Rubicon thing?
What rims are on this build?
Do you know when is kit hitting the market?
When are these gonna be available!???
Hi what head light is that ?
Great high quality production👍, helpful information as I’m about to buy a rubi this week. Can you tell me what camera 📷 you are using to make your video. I also have a channel and I’m looking for the best video camera. Thanks john
We use Panasonic Gh5s cameras. Thanks for the compliments!
Hello. Can you please tell me yellow fog light you installed. Part number, make. Also will they plug play into the std gladiator Mojave’s bumper ?thank you. James.
so you can keep your factory inner fenders ? and when will they be selling these ?
Fog light related question. I have a halogen version on my 21 JLUR. Am replacing it with a OEM LED fog lights. Do you know if the connectors are the same between the halogen and led version. Also, do I need to get the Jeep programmed to tell it that I am using the led version now? Thanks
@quadratec Is there a reason I couldn't do this to an 80th anniversary gladiator? My fenders are the painted ones and appear to be the same as the rubicon ones as far as I can tell.
So when are these going to be available ??
Im afraid I might trade in my JL for a new Bronco before these end up bring available ???
Does anyone know if rubicon JT front fenders will fit a stock JT sport model. I would liKe to have the extra clearance the higher rubicon fenders give.