Outstanding! I've always wanted the 2nd gen MR2, but never dared to buy one back when they weren't too expensive. Regardless, well done - the swap looks fantastic.
Okay, I've got to ask: You hand-ported the intake manifold around the bungs for the bolts. Now that you've cut into the runner where the bolt runs, won't there be a vacuum leak for unfiltered air to be drawn into the runner directly from the outside? Gasket won't seal that part.
Hi, are they sharing the same engine mounting? Or need some modification on it ? And how about the engine wiring setup ? It would be very awesome if I can rebuild on here in Malaysia
It’s actually almost a direct swap: reason being is that the V6 family uses the stock 5sfe tranny from a non turbo mr2 (S54) where the three of the four engine mounts are already on, the engine mount on the right side needs an adapter that are very easily obtained and boom! V6 swaps are going to be the new norms as 3SGTE’s are less and less plentiful (I used to pick up usdm ones all day long for under a $1,000 back in the 2000’s and mid 2010’s) also, keep in mind you will have to oval the flywheel holes on the MR2’s clutch assembly to mate it to the crank, hope this helps!
To any asking Frankenstein Motorworks makes/sells everything from motor mounts to custom headers for this swap.
can we buy everything from Frankenstein Motorworks to have all the parts needed to swap a 2gr?
or there are parts or we have to look elsewhere?
Frankenstein motorsworks has everything u need. Include wiring
Outstanding! I've always wanted the 2nd gen MR2, but never dared to buy one back when they weren't too expensive. Regardless, well done - the swap looks fantastic.
T pipe vibes 🔥
I have a Fiero, always liked the mr2 as well, this is a sick swap
I have a 1986 Fiero SE....I love that car!
Great! now get a set of Berk Technology header with Berk Technology exhaust that is made for the MR2 V6 swaps it makes the engine sound like a F1 V6 !
Has to feel like a rocket ship now 😮
WOW that sounds insane. Congrats on the swap
that s54 is going to cry.
Hell yea man...gotta love cars
Huge W
You guys are awesome!
Sehr schön.. sehr geil
I have a Rav4 with this engine. The thing scoots!
Sweet ride
Might as well fix the timing cover leak while the motor is out
Nice project!
What axle carrier bracket works for your S trans? Im considering using a S53 😅
@@finkthreely7089 Hello! It is a single piece axle no carrier bracket. Need to go custom for that
looks like fun :)
not the dunks 🫣
How's your transmission holding up?
Mr. 2
Now to put it back in the Sienna 😅
Okay, I've got to ask: You hand-ported the intake manifold around the bungs for the bolts. Now that you've cut into the runner where the bolt runs, won't there be a vacuum leak for unfiltered air to be drawn into the runner directly from the outside? Gasket won't seal that part.
i ported where the injectors go, and there’s o rings up top. I actually went too deep and touched the o ring a bit, which is why i had to jb weld it
How tall is the 2gr-fe. I cant find that number anywhere
What electrical components were used in this swap ?
Wow amazing. What wiring harness did you use
camry harness which i converted to use the sienna ecu. I actually messed it up which caused my codes
Hi, are they sharing the same engine mounting? Or need some modification on it ? And how about the engine wiring setup ? It would be very awesome if I can rebuild on here in Malaysia
you'll need to buy new engine mounts built specifically for this swap. couple modifications needed but a lot of the parts are available.
It’s actually almost a direct swap: reason being is that the V6 family uses the stock 5sfe tranny from a non turbo mr2 (S54) where the three of the four engine mounts are already on, the engine mount on the right side needs an adapter that are very easily obtained and boom! V6 swaps are going to be the new norms as 3SGTE’s are less and less plentiful (I used to pick up usdm ones all day long for under a $1,000 back in the 2000’s and mid 2010’s) also, keep in mind you will have to oval the flywheel holes on the MR2’s clutch assembly to mate it to the crank, hope this helps!
@@restart426 thank you for your reply, it gonna be insane if I do or in Malaysia 🇲🇾 haha because no one here actually done this mod yet
Hey, I used 1 custom passenger mount, it was only $165. For wiring its easier to use a 3rd gen sienna harness and buy a custom flashed stock ecu
🔥🔥🔥💯
What Manual Transmissions bolts up to the 2GR-FE I can't seem to find any information. I'm wanting to do this swap on my Camry.
since you’re doing it on a camry and it’s a fwd car you should strip the transmission from a solara, i think its the e351 transmission
@@nauxah My Camry is Manual from the factory.
How did you convert the wiring harness?
I figured out my codes, ended up switching to a sienna harness and its running good now. So i guess the answer to your question is: wrongly
Hey man what tool are you using to diagnose the codes and make certain ones permanent?
Ever figure out you're code issue's?
Yo Oscar Anthony Stark Clark invente la pluma para sacar motores los amo
Nice! Super clean motor. Where did you source it from? And who did your harness?
@trev.mr2 did you use the same mr2 transmission ?
where did you get the emblem for the steering wheel?
What transmission did you use
How many hours would you say it took you for this swap?
Aren't fe engines economy versions of toyota engines?
yes they are tune for economy, the GE are for performance the head are develop by yamaha
@jeffreygarcia8597 I know, that's why I was suprised by the engine he used....
@@AJVAN_ the 2gr-fe can make up to 400whp NA pretty easily... Plenty of power and torque
Hey whats that app that you used for the code reader ??
OBDLink
Was that the original transmission??
yes, the s54
@@2grmr2 Are you going to upgrade to an e153?
@@jraddd3477 if it every breaks, im going e351
@@2grmr2 noice do lsd
@@2grmr2i have n/a transmission as well, have u ran into any problems so far?
2 many cams
😍😍😍😍😍
How much did it cost ?
$4k, 3k after selling my old engine and exhaust
sell me the axleback of the 5sfe!
sorry bro i sold it a few months ago
Can yall give a parts list to do the swap ?
Don’t think that took 5 minutes 😂
Let me know
Ayy I’m doing the same swap and if you don’t mind could i get your Instagram or a way to contact and ask questions on how u did your swap lol