New Whirlpool Washer Diagnostics.
HTML-код
- Опубликовано: 1 окт 2024
- This video will show you a little bit about the washer diagnostic on a new whirlpool top load washer. You can run an auto test, individual comments and other things in diagnostic. I show what I use and mention little detail about it.
Enjoy!
Worst washer ever invented.
agree, we have a nails salon and this thing broke down within 1 year
True!!!
I agree
Yep. Never worked right from day one
@@bennyjallenI can’t even get mine to dispense fabric softener 😭 I have only had it for a week
Just never EVER buy one of these pieces of trash. It will totally ruin your LIFE!
I’ve had mine not even 6 mos and it don’t want to work anymore it’s just crazy how expensive they are and to fix .
Mines too
Made in USA quality!!
Agreed, ours lasted just over a year until we got the code today. Our old washer lasted over 15 years with zero issues.
Me too. Just few months and stop working 😢
Got one 2.5 years old for free. No one would come repair it so the owners got a refund.
I wish that worked for mine. Nothing will make it light up. I have that same model and it just won't work. Could it be the whole control board?
Were you able to get an answer on this issue?
How would you reset it or recalibrate it after you have worked on it?
The HMI (Human Machine Interface) is essentially your control panel. You can test things like the buttons, the display, the LEDs, etc
Finally a video that’s actually helpful! Thank You!
Why are people saying these new washers are so bad they’re meant to be better for new washers
How can I unlock the door.. this is the only video I can find with the same washer model.. I keep getting a drain clogged message but I can’t even open the washer door… please help
Did you ever figure out what was going on? My washer is showing an error code F9E1. Any help is appreciated.
F9e1 means bad drain pump
You have to drain all the water out first by taking out the drain hose and lowering it into a bucket and let it drain into the water is completely gone then the door should unlock after pressing things like Spin and drain or something. Or you can do the Diagnostics in this video he showed how to unlock the door.
Man I owe you big time! Thank you. Was able to pump detergent into the tub to prime it. Was scratching my head buying dispenser tank and detergent flow pump. Regular quick cycles wouldn’t pump enough detergent through the line. Only out a few bucks, works like a charm. I appreciate you giving up this secret.
Out of nowhere, mine won’t turn on. Not sure how to get this issue fixed. Whirlpool won’t help. And I see this question has been asked many times, any help?
I have the same washer and just moved to a new house down the road. Now washer won’t power on at all. No buttons or codes just nothing. Outlets have power and breaker isn’t tripped
i hate this washer
HELP- I have this washer but the power button doesnt work. It worked one day and now it doesnt power on. Is the panel bad?
Did you figure out what was wrong with yours?
I hate mine too. I got it during COVID
Lol, I just bought this set of a guy who got it during the vid….. and he said he called the warranty countless times to fix lots of things till he got fed up and bought a whole new other diff set…. Got these fixed and sold them to me and their working fine for me….
Said that parts were quickly put together that failed since whirlpool rushed them out to sell quickly since the world was scared and bought everything off the shelves lol
Great for me when people went broke and sold them off for cheap, i was that buyer lol😂
$800 washer lasted 50 cycles. Would have been lower cost to go to a laundromat. Whirlpool ain't what ot used to be...
Mine wont even come on but i know has powrr for few seconds says power failure
Just got saved from a headache...thank you
Thank you! Glad I found your video! My washer would start the sensing cycle and go straight into spin/drain mode. I followed your steps and did a factory reset. I just threw in a load and it seems to be working right now….fingers crossed. This machine is only 3yrs old. They don’t make them like they used to. 🫤
How did he say to factory reset??
This is some nice bits of information, too bad my washer doesn’t initiate any of the diagnostic tests and therefor won’t drain the water in it. Lol. It just stopped mid cycle and said it’s putting in its 2 week notice.
I tried to get into receive the fault code, but no luck. Same model washer. My washer lid is locked and will not power on. Any advice?
Same
Mine ended up being a bad control panel!
@@kaylahoffman1539 thank you! I am experiencing a similar issue. Screen won’t power on and the lid locks
Mine is locked and can’t opened it🥺
Same here how can i unlock it?
Thank you for great tips. I need help with this same model. The spinning diagnostic didn’t work. Do you think I should change the synchronous motor?
Worse machine ever don’t buy
We own this machine = pretty much still new...Haven't even started taking it apart yet, but last night we smelled an electrical smoky smell, so I am guessing the control board burned up! Does not show any signs of life when plugged in now. 🤣🤣🤣🤣 Send me a pointer or two if you have time Brother. Like do we know which board to order or maybe it is the capacitor? Thanks man!
My washer just stopped working and flooded my floor. Any one experienced that before?
Any chance you might know what might be causing mine to spin but not agitate. Whirlpool wtw7120
Do you know how to calibrate this washer after oscillator is replaced?
Piece of sh$#*&. Hate I bought it.
Mine won’t even turn on , any fixes for that?
My washer just shut off and nothing turns on. What is this model number? Can you please post it so I can order the part? My lid is locked closed right now.
Why does my washer going to drain mode way before starting to wash I'll put clothes close lid it will sense then goes strait to drain and I'll show finish washing see if you can help me bro
We just got ours a few months ago, and just stopped working out of no where…. Hopefully this helps out
Yep they’re garbage
This washer sucks. Keep a 6 pack of main control boards in stock if you have one. Spoed queen- next stop
Another great video! HMI is Human Machine Interface
Pure junk!! 🤬
Great video! Mine came from a ding & dent place and had no owners manual or ppwk, so it’s been a struggle to figure out. All the instructions are in Spanish. I do not speak or read Spanish. Is there a way to change it back to English?
My whirlpool.will only work ok heavy cycle help
I have the same model and I’m having troubles with it. I just tried testing some of these and nothings responding. Do you have any suggestions what might be the problem?
Worst washers I've had mine changed twice in less than a year
I was washing a load snd our block lost power during a cycle. It now says I need to contact service to fix it. How do I reset it without having to call someone to come fix it.
Thank you very much bro, you helped me with a team that I also have here.
Brand new washer, on it's maiden run, during the spin, going fast and trips breaker on the main panel, then shuts off, locking the lid. Sad, very sad.... Calling Whirlpool, waiting about 45 minutes before real human answers. Scheduled warranty appointment online, waited all day, no one showed up ....
that is the story.
were they able to fix it?
Got any info on the matching dryer? We have one that's just about the same as yours washer dryer set & it's coding f7e1 no not sure how to fix it, but out dryer needs a heating element & we can't figure out how to open it up to find it
Mine says f5e3 but i checked the latch and everything works fine any tips
So your video was very informative. I have a door lock code was wondering on how I can reset that?
You ever get that info ?
@@larryellis433me 2
Hmi is human machine interface. So touch pad.
Thank you for that info! I had no clue jaha
My machine won't even power on can you help me?
How do you bypass the lid lock? My lid is closed but washer says close lid.
This video is pretty much useless.
Whirlpool sucks. Actually they all suck, no one makes anything that lasts anymore.
All on purpose. There are not enough boomers to consume anymore so corporations have moved to an expiring product model of profits and economic growth. Known as planned obsolescence, corporations have colluded for over a hundred years to limit product life. The lightbulb cartel is an example of this as lightbulbs can be made to last 100 years, but there's no profit in that.
Thank you. Your contents are great, however your narration is not in sync with what your action, and it gets confusing.
I have the same washer. Washer was OFF when we had a five minute power outage. Now the washer will not turn on at all. Does anyone have any help or advice with this problem?
Unplug for a few minutes.
I’m having the same problem it won’t turn on what can we do ??
Mine sucks 18 months later it sounds like a ford tempo
F9E1 code. Pump is fine, drain is fine. Third time same problem, diagnostics did not help. Had to unhook the wires to the pump under the washer to unlock the lid! Less then a year old and have had nothing but trouble!
Got the same code
Few months old
I have that same cold right now
How did you unhook the wires
Any updates on how this was fixed? I am experiencing the same problem.
mine broke down withon a year and its been stuck on f6e1 error
Mine is locked and wont open. fried burnt circuit board
I got them on Tuesday last week so today. I had my first wash of clothes and I sure did not like the way the washer machine worked. The water was to low and did not wash my clothes right I still had my perfume on my clothes still. I went today back to the store to return them back and got my front loader. I will never change my front loader machines to a regular top load machine there are no good at all. I have seen a lot of bad comments on the top load machines.
This is my EXACT issue to the T. Had mine less than 48 hrs. Taking it back this Friday.
Mine just broke down. It’s full of water and I can’t get the door open to remove the clothes. Starting to smell up the house…
Same here
If you can, go to service mode, and in the service functions, run the drain pump. And while you’re at it, there should be a function to toggle the lock. Toggle it and it should unlock. If not, I guess depending on how badly you need your clothes, maybe pry it open with a crowbar or something lol.
This washer is junk I replaced the flow valve then the lid lock went. I replaced that now the damn start switch is out.
SPEED QUEED ALL DAY
I just got mine. Wouldn't start kept saying add garment, then completely stopped turning on all together idk what to do now. Any advice?
Did you ever figure out why?
Same problem...were you able to figure it out?
No power
did you ever get the power fixed?
I own this exact washer and it works great in all cycles except in Bulky item setting. The items are soaking wet after cycle ends. It worked great for a year, now not spinning all water out, only in this cycle. Any advice?
My clients have a similar issue…. Did you get it?
If I could only express how bad I hate this washer!!!! Peter and the chicken for all you family guy watchers… 😅
The pump is draining and won’t cut off…any ideas?
Same here
Any tips on how to make it actually wash the clothes ?? Mines just says socking then drains an is done it don’t really wash them 😑🤦🏻♀️😭
Mine is making such a horrible squealing noise and I’ve looked underneath it and it doesn’t have a belt I have wasted so many hours of my life with this stupid washer ☹️
Thanks for sharing the info.
You got it!
F9E1 code. Third time and have to wait weeks for service tech each time. How can I unlock the lid?!
I have the same problem what did you do can you help please!
Looking for help with the same issue. Any advice?
Thanks for sharing the information
Begging anyone to answer My washer fills full force during the test but when I run a load I get a stream of water …. It errors out and will not fill . I factory reset and it didn’t fix the problem
Thank you, thank you, thank you!!! My washer was stuck in sensor mode and I thought I was going to have to shell out a couple hundred bucks to the appliance repair person. One quick diagnostic cycle and the issue fixed itself!
thank you for this video. very very helpful. do you happen to know where i can get the wiring schematics?
Same model the door lock will not engage WTW7120HW0 , close lid to start message
We purchased our washer about 7 months ago the load and go does not work. We had a repair person out and he replaced a part but it is still not working. I have removed the detergent cleaned it. Set it back to the factory reset, It will show when it is empty or full but doesn’t dispense
Thank you! I've had this for about 2 years and I had to troubleshoot a problem. I went to fault history and saw a FOE7. Easy remedy. This helped me get back to my favorite thing to do...laundry...NOT!
What did you do to resolve the F0E7 issue? We are getting that on our now. It's thinks we are trying to run a Washer Clean Cycle and says too unload the laundry. We are not running a clean cycle.. so very confused.
I have a wtw8120h and it just quit today mid cycle. I have unplugged it and there is power to the breaker. I can't get the diagnostic screen to come up or anything?
I will bet you money the belt is still squealing or the washer has since been discarded. What a disgrace to the whirlpool name
My machine is all mixed up!! It starts to spin then stops and fills again. I need to pause and start for it to wash properly cause sometimes is won't wash and hardly turn. Sometimes it starts spinning in a weird way that all the clothes bundles up on the agitator and I need to replace. Sooooo many issues. How can I try to calibrate it back to the initial factory settings?
i have this washer and it is dead in the water! no display turning on or anything. 😭 not even 2 years old. anybody have this happen? tips?
my drum doesnt seem to move when it agitates, only the bottom piece really spins. How did you determine if it was the belt?
I have this same washer. It is stuck in drain without any clothing or any water in it. I have unplugged for time and plugged back in and it goes right back to it. Help!
My washer the screen doesn’t work just show the time that’s it🤦♀️
How do i start iy
How can bypass lid lock.mine is saying close lid to start cycle
I have this washer and I can't get anything to happen on the LCD after touching those buttons 3 times each, its just dead. Is there something else I can do?
I keep having power failure issues with this same model
I have same washer and it works great for a while and then won’t turn on for day or two and then randomly I press the button and starts
I keep getting a f9e1 error
My washing machine says add garnish and then it’s a wash and complete it don’t even wash the clothes
What if it won't work at all the screen just flickers no display then goes black
Mine seems to not engage m the timer and head unit seem fine but as the timer goes it senses but doesn't fill or run a cycle. WTH
The fabric softener doesn’t dispense since I got it last week any idea why
Me puedes ayudar mi lavadoras es de estas y ya no me encendio gracias
My mother just bought one and I am on here looking up how to use it for her instructions over the phone .
Water is not draining it’s keeping water
Will it show code it something is wrong after you do exicute I did the diagnostic and nothing showed but I keep getting unbalanced code in cycle no matter what I wash
I have the kenmore model of this washer & it is sensing loads for like 5 minutes and then shows "wash complete" and stops.
Any idea what could be the issue?
What if the F1 code is on and the lid wont open?
Mine is making a very loud noise when it spins.....like the bearings need to be replaced and its not even 2 yrs old when i got it..
I can’t get mine to turn on.
Mine the load and go won’t work
I got this exact one brand new back in April of 2021 and tonight I was trying to get the whites done and all of a sufden I get an error F7E1. But when I did the diagnostics everything seemed to work perfectly fine! So what should I do here?