Fractal vices are super-cool tools to have but smooth jaws have their limitations, as opposed to the diagonally-knurled, serrated jaws that most bench vices come with and those fractal jaws will only grip an object from moving up and down, as well as any smooth metal surface can and when you multiply the verticle facets to better grip the object horizontally, the jaws just become 'rails' in a vertical sense, due to less gripping surface. I would suggest putting multiple metal blocks if nessasary underneath the object to support downward pressure.
I have an idea that i believe solves a problem for people and would be a hot ticket item if we could make it affordable. it would involve metal however and I really only work with wood so I need Help.
The chain drive on the vintage saw makes perfect sense. It keeps the blade in the same orientation along its entire length as you follow a scrolling pattern. You have to swing the frame around to keep it outside the wood as the blade changes directions. You can't "just twist your arm and the entire saw" if there is wood in the way!
Also if you want to cut a long strip greater than the depth of the saw, you can then offset the frame to one side and still cut parallel to the straight edge. I have a cheap draper piercing saw where I have bent the top part of the frame so that I can cut 12" parallel strips.
Spot on, I was thinking the exact same thing. Up a ladder cutting fretwork you can't push the spine of the saw through the timber no matter how far your wrist will go ...
I guess these guys have never been up a ladder trying to something intricate with a HOUSE in the way and you CAN'T just come in from any angle you want...
Knew Concepts tools are great. I have/had the honor to be a friend of Lee and Brian along with being an occasional tester of prototype tools. They always do their best to make well engineered tools for the metalsmith and wood worker. Thanks so much for bringing Brian in for some show and tell.
OK, Adam, please read this : I have a tiny little appartment, and it's like a mancave. But I struggle with my neighbours in two ways: 1) I have 3D printers, but they are to noisy and not moveable for say, and b) everything is everywhere, so the dream of having a smallspace-shop has always been my to-get-to goals, where I never seem to arrive at. Thinking more recently I need a big shop somewhere, but it is expensive an not for a home-maker. So, about 17:14 in this video, you were talking about doing videos about and for the small maker and in small spaces? Well, I could need all the advise you can give, and strongly vote for those kind of videos. Except, I'm small and probably quite alone. So yeah, keep up the good work!
Dear Adam Savage, I have longed for a woodworking shop since I was about 10. My Grandpa built his house and an art studio for my grandma, who was a semi famous artist in Salt Lake, Utah. He was a very good woodworker and built many things my family still thinks of as heirlooms (including toy building blocks for his grand-kids). They inspired me to want to do woodworking and art from a young age. I'm only saying this because I do live in a small apartment with my wife and 2 cats. I've always loved Mythbusters and I think what you're doing by showing everyone that you don't need a lot to have fun is a great idea. Just need an imagination and patience to make anything fun.
Mr Finner was asking 'Can my wrist hurt less at the end of the day?' The cast iron frame hangs while working at height so you're not contending with the weight of the frame wanting to twist the saw. Also you're working on the bottom adge of a fixed workpiece so the frame is always out of the way. You would cut in situ for reasons of symetry, cutting detail after fitting would achieve this better than the other way round. He was trying to fix a pain-point.
I would so pay for a show like Adam describes. "Home maker rescue". It's a brilliant idea and if it's not adam doing it but instead being the director/production and someoen else I think that is an amazing idea to add to tested's channel. heck even as a subscription only.
Wow what a saw , they are fantastic , Adam i love your enthusiasm for not only your work but the work of others , you have always been on my very small list of people i would love to talk to , brilliant video . thank you both .
I first bought the 5” aluminum frame saw, and although it does provide greater linear strength than legacy jewelers/coping/fret saws, just as he said, the torsional strength was about the same. So, I bought the titanium cage saw and man it’s been great. It is ~3x the price, but the others will break blades after 1cm. Also, anyone looking for blades, even though Knew Concepts suggests the pegas brand skip blades, if you’re cutting mild steel or metals then I’d suggest the Herkules White Label blades. They also have sizes up to 14 which are about 1/8” thick, non-skip toothed and case hardened. They cost $60 for 144 blades, but they will last you a decade. Just don’t over tighten any blade, find the correct tension by plucking the blade, aiming for a nice resonance tone; ‘singing’
We recommend the skip blades for dovetail work. In wood. For metal, you definitely want jeweler's blades of one stripe or another. We stock (and recommend) the Herkules white labels, but any of the name brands will work well.
I finally figured out why I keep bingeing your videos. It's not just that I'm terminally fascinated with tools and their uses - it's that you make me feel unjustifiably young in spirit. Thank you!
As a guy that works in my "dining shop" in an apartment, can't wait to see your small space setup video(s). Can always use more ideas! Though honestly pretty happy with what I've created.
17:04 Adam....that show of making small maker spaces? I'd watch tf out of that show & tested be a great vehicle for it. I'd buy cable or another service for that show.
I'm lucky enough to own a Knew Concepts Ti birdcage saw. Piercing work has been one of my favourite things since the day I started training to be a jeweller - but the birdcage saw just made it several orders of magnitude more enjoyable and satisfying. My non-jeweller friends do think I'm stone-cold crazy to spend that much on one (in their eyes) rather unassuming tool but what do they know? Nothin', that's what!
Nesting is a surprisingly complex topic, really interesting to hear how it affects design. I do some CNC work, and deepnest is a great software tool to look at nesting options.
I have an RBI Hawk fret saw that is modeled after many of the concepts but is motorized. What a good looking tool displayed in this context. I am also wowed and blown away! Touché!
Cool as heck. I'm sure Lee is watching and enjoying all of this ! The first RT saw I made from scratch was sort of like that, and was good until Lee's old saw guide, and the prototype motor saw he made that I still use. This is amazing !!!
I looked at that fancy scroll saw machine with the same awe that Adam did. It really is a WOW! The unfortunate fact is that you still need the artistic talent to go with it. That I do not have. Following a line with a blade is a skill that many lack and as the scrollwork gets smaller, the mistakes and mid course corrections are amplified and it doesn’t take long to make a piece unusable. So, faor the artsy people, here is a product to make the sawing part effortless. For those of us with the hands of a blacksmith, the bestest, elaboratist, expensivist tool won’t overcome our other problem. But from the point of a mechanical wonder, I love what you’ve created. 🥸👍👀✅
Amazing saws, firstly! But secondly, I love the back-and-forth of each man wanting the saws in their hands :) "NO, I want to hold this magnificent object!"
Huge wow! And, the engineering isn't the only great thing about the saws - the price is actually affordable. It makes me so happy just to know this exists.
I've owned a cabinet shop since 2011 and do we do all types of woodworking. I have a great fondness for cool/ well-made tools from American manufacturers. So I ordered a few of their saws just to have. But I could never see me using that large one. The tech now let's me do that type of stuff so much easier. I can even pull off the angles using v-bits. I used to be all for doing everything by hand, but hands make mistakes. Cnc tools rarely do lol
Having people like this on your channel is one of the myriad reasons why I'm always drawn in when watching Adam. I absolutely need one of these for various reasons so now I know it exists. 😂 I didn't even think I child find this kind of tool so... Thank you Adam for being the quintessential maker.
No joke, i used fret saws for years and years. Then saw adams video 10 years ago, bought one and absolutely loved it. Seriously a well made and worth it tool
@jaxistheman1 a fretsaw? Or that massive deep throat (hehe) marquetry saw? Because that saw it used to do precision work, such as cutting out parts used in fancy woodworking inlay work caled marquetry. Or even. Metal inlay work as well. A fretsaw can do similar work, but is also good for cutting out the waste between dovetail joints. It's also used to cut the slots in the neck of guitars that frets are installed into (thus the name). Some call it a jewelers saw (how I best know it from my former trade). We used the. Ofte. To cut small metal parts such as tbe shanks of rings.
I just recently bought one of their Mk.IV fret saws with swivel blade clamps and am really impressed how much better it works than my swiss made Grobet fret saw
I don't think I will ever have a need for a Marquetry Saw but I want one just to stare at it longingly and show it off to people. LOL What a beautiful piece of engineering.
Yep, I think is brain is bigger than his shop. Clickspring is so inspiring yet also depressing "I will never be that good...." So I spend a lot of time thinking about making CNC machines that will do that for me.
Manual scroll saw, I could see this being useful for intricate medal work like jewelry, not so much for woodwork. I could see a fairly large learning curve in order to operate this saw correctly. Definitely a neat idea and cool to see.
I currently do all of my woodworking on a 3'x5' balcony, with as much flat pack workspace as I can. I am seriously looking forward to you putting out a small workspace series, even if it's more of a TedTalk.
I have no immediate use for a precision saw at this time but I greatly appreciate the genius and engineering that went into solving the tool design problem.
Super cool. I actually have one car garage I’m using as my own workshop. That’d be super cool if you did a show on helping people make their own workshops. I’d love to pick your brain on how I could utilize my space. Great video again!!!
People saying the chain drive cast iron coping saw has an answer: have never actually used it. If it was useful, there would be more of them around. The fact there aren't more examples shows the people at the time it was made saw no need for it. If Christopher Schwarz couldn't find a reason to have one, it is just a curiosity from the past. It is a tool shaped object.
We now demand that Adam show tiny shops around the country, he can start here in surprise, AZ at my house and my work shop we help transform from a 30 municipality fleet to a shop for parks and recreation maintenance. We build all sorts of things that would “make” Adam happy look forward to seeing everyone here in AZ ! Come on tested
The chain drive keeps the saw blade from twisting when you change the blade angle (each end of the blade move together angularly). You spin the blade to get the frame out of the the way of your work.
Somewhere I have a photograph of my Grandfather as part of a crew building a 2 story house here in Victoria, BC. Now, in modern times we have pre cut 4x8 sheets of plywood and the studs in houses are placed to make it easy to just slap those suckers into place. This photo I have is from the 1920s, or maybe early 30s. They had no power tools or air nailers. Here they were, on ladders running a SINGLE piece of plywood, on the angle from ground to roof line, holding it in place and hammering nails into it. So while you may think no one would do that gingerbread cutting while up a ladder - you may be surprised. It was probably better to put the solid wood in place then cut to reduce the risk of breakage.
If the bench pin is set at a slight angle to make tightly fitting marquetry, then rotating the blade to cut backwards would also invert the tilt angle of the cut. Does the saw have a mechanism for moving one end of the sawblade off the rotational axis to create a consistent tilt for any cutting direction?
I would think you would need to rotate the work piece along with the blade to maintain the angle needed in the work piece but the angle of the saw is fixed
We didn't really get into that, and worse, the bench pin you see in the video isn't the normal one for that saw. The normal one doesn't tilt. But it somehow didn't get loaded when I packed the truck. So I winged it with the pin we did have. The way the marquetry saw normally does angles is that the entire guide tower tilts, rather than the bench pin. (There's a protractor built into the pivot mechanism.) There is also a system to lock the blade swivels into 'straight-ahead' mode when cutting like that. Because you're correct: if the saw's tilted, and you try to cut in a direction other than perpendicular to the tilt, your angles will get fouled up.
@@KnewConcepts a foot pedal that would actuate the saw blade like an old foot powered sewing machine would probably be popular too. Awesome tools, keep on being awesome
NeilSedlak is exactly correct. That old saw is really cool and amazingly functional. Knew concepts does make cool saws. Check out Patrick Edwards at the San Diego school of french marquetry. He uses a chevolet saw that is really. Cool. The fine detail work he does is incredible. I really enjoy your show and your book. Thank you.
I saw that huge saw at Handworks this summer, and right next to them was a young kid with a large wooden marquetry saw. It was really interesting to see the two side by side. It was Christopher Schwarz from Lost Art Press that he mentioned, right?
Adam, please make the TV show happen to bring maker shops to people's tiny apartments! I know that you don't want the effort associated will filming a show, so I'd be happy to see you provide remote guidance at the beginning and reaction at the end of an episode.
The idea of showcasing small workshops in improbable places is an idea that obviously strikes a chord with many of your viewers, as evidenced by the comments below. I belong to a Pen Turning organization and I met a man at a show. He was retired and he and his wife lived in a one bedroom apartment, giving him no work area at all. He convinced his wife to give him the hall closet. He then built in a workspace where he could bring out his lathe and turn pens to sell. His wife said ok but when you’re done with each and every work session, the tools get put away out of sight and the mess gets cleaned up. Immediately. He loved her for her strict rules because it made him be as neat and efficient as possible. He got out of the habit of laying any tool down on his work table but into the habit of placing everything back on its hook or in its box. He knew he had to have a place for everything and kept everything in in its place. It made the breakdown, put away, clean up process a breeze. He made beautiful pens and derived a good income stream for his efforts.
17:00 - When I lived in an apartment, and constantly wanted to do woodworking, I had this dream idea for a soundproof saw box big enough to put an 8' long plank of wood in, line up the cut, then close it, and it would make the cut for me in completely silence, or at least no louder than a quiet television, because I'm also a night owl, and wanted to cut lumber at 3AM without annoying any of my neighbors. I wondered if there was a way to close over the plank, so it could be a smaller thing, with the lumber sticking out the sides, with some kind of baffles that pressed around the wood to block the sound, but I think there'd be no way to get around the parts sticking out acting like big speakers, transferring the sound to the air outside the box. I daydreamed about it so often - could it double as furniture, like a couch that flipped open, because apartments aren't that big? I also wondered about a very slow system, like 3D printer slow, where I could at least get a cut done over the course of an hour (or several), where it was more like hydraulic force, and a very well sharpened saw that acted like a bunch of chisels, akin to a broach cutter. Then I rented a house with a garage, and the dream evaporated, and then I bought a house with a big garage, so... I'd still love to see some solution for apartment dweller makers.
I'm alittle confused at Brians lack of understanding what a coping saw does, Ive used Coping saws for all kinds of projects for the past 45 years, the ones i use have swivel ends but you have to swivel them yourself both independently and try to match them up, so to have a coping saw that rotates both ends together is genius, i could think of numerous reasons for needing to rotate the blade
Knew Concepts saws and tools: www.knewconcepts.com/
Fractal vices are super-cool tools to have but smooth jaws have their limitations, as opposed to the diagonally-knurled, serrated jaws that most bench vices come with and those fractal jaws will only grip an object from moving up and down, as well as any smooth metal surface can and when you multiply the verticle facets to better grip the object horizontally, the jaws just become 'rails' in a vertical sense, due to less gripping surface. I would suggest putting multiple metal blocks if nessasary underneath the object to support downward pressure.
I have an idea that i believe solves a problem for people and would be a hot ticket item if we could make it affordable. it would involve metal however and I really only work with wood so I need Help.
The chain drive on the vintage saw makes perfect sense. It keeps the blade in the same orientation along its entire length as you follow a scrolling pattern. You have to swing the frame around to keep it outside the wood as the blade changes directions. You can't "just twist your arm and the entire saw" if there is wood in the way!
Yeah exactly. It's not hard to get.
Also if you want to cut a long strip greater than the depth of the saw, you can then offset the frame to one side and still cut parallel to the straight edge. I have a cheap draper piercing saw where I have bent the top part of the frame so that I can cut 12" parallel strips.
Yeah, it was pretty weird they both didn't think it was necessary....then immediately moved to their own product using the same idea...lol.
Spot on, I was thinking the exact same thing. Up a ladder cutting fretwork you can't push the spine of the saw through the timber no matter how far your wrist will go ...
I guess these guys have never been up a ladder trying to something intricate with a HOUSE in the way and you CAN'T just come in from any angle you want...
I love the no nonsense attitude of this guy. No fancy marketing lingo, just honest reasoning and the product sells itself
I would watch Adam Savage building random people workshops in their homes until the end of time!
I have been drooling over their saws for years, especially that big one he was showing off. Glad to see them doing so well.
There is SO MUCH to love about this video!!
Great to see him back again with the finished saw, and what a thing it is.
I don't have a use for one myself, but I really, REALLY want one.
You have an engineer's soul my friend. Same as Adam wanting an object just because of the sheer brilliance of the engineering.
Knew Concepts tools are great. I have/had the honor to be a friend of Lee and Brian along with being an occasional tester of prototype tools. They always do their best to make well engineered tools for the metalsmith and wood worker. Thanks so much for bringing Brian in for some show and tell.
OK, Adam, please read this : I have a tiny little appartment, and it's like a mancave. But I struggle with my neighbours in two ways: 1) I have 3D printers, but they are to noisy and not moveable for say, and b) everything is everywhere, so the dream of having a smallspace-shop has always been my to-get-to goals, where I never seem to arrive at. Thinking more recently I need a big shop somewhere, but it is expensive an not for a home-maker. So, about 17:14 in this video, you were talking about doing videos about and for the small maker and in small spaces? Well, I could need all the advise you can give, and strongly vote for those kind of videos. Except, I'm small and probably quite alone. So yeah, keep up the good work!
As a DIY person in a tiny NYC apartment, I'd love for you to do that show, Adam.
Dear Adam Savage, I have longed for a woodworking shop since I was about 10. My Grandpa built his house and an art studio for my grandma, who was a semi famous artist in Salt Lake, Utah. He was a very good woodworker and built many things my family still thinks of as heirlooms (including toy building blocks for his grand-kids). They inspired me to want to do woodworking and art from a young age. I'm only saying this because I do live in a small apartment with my wife and 2 cats. I've always loved Mythbusters and I think what you're doing by showing everyone that you don't need a lot to have fun is a great idea. Just need an imagination and patience to make anything fun.
Mr Finner was asking 'Can my wrist hurt less at the end of the day?'
The cast iron frame hangs while working at height so you're not contending with the weight of the frame wanting to twist the saw. Also you're working on the bottom adge of a fixed workpiece so the frame is always out of the way. You would cut in situ for reasons of symetry, cutting detail after fitting would achieve this better than the other way round. He was trying to fix a pain-point.
I would so pay for a show like Adam describes. "Home maker rescue". It's a brilliant idea and if it's not adam doing it but instead being the director/production and someoen else I think that is an amazing idea to add to tested's channel. heck even as a subscription only.
Wow what a saw , they are fantastic , Adam i love your enthusiasm for not only your work but the work of others , you have always been on my very small list of people i would love to talk to , brilliant video . thank you both .
This was a great video. I have briefly touched on things you can do to help but I enjoyed the breakdown of each. Awesome job 😊
I first bought the 5” aluminum frame saw, and although it does provide greater linear strength than legacy jewelers/coping/fret saws, just as he said, the torsional strength was about the same. So, I bought the titanium cage saw and man it’s been great. It is ~3x the price, but the others will break blades after 1cm.
Also, anyone looking for blades, even though Knew Concepts suggests the pegas brand skip blades, if you’re cutting mild steel or metals then I’d suggest the Herkules White Label blades. They also have sizes up to 14 which are about 1/8” thick, non-skip toothed and case hardened. They cost $60 for 144 blades, but they will last you a decade. Just don’t over tighten any blade, find the correct tension by plucking the blade, aiming for a nice resonance tone; ‘singing’
We recommend the skip blades for dovetail work. In wood. For metal, you definitely want jeweler's blades of one stripe or another. We stock (and recommend) the Herkules white labels, but any of the name brands will work well.
I'm a finish carpenter used to be a goldsmith I like this saw but really couldn't justify the buy
I finally figured out why I keep bingeing your videos. It's not just that I'm terminally fascinated with tools and their uses - it's that you make me feel unjustifiably young in spirit. Thank you!
this has to be some of the most beautiful engineering of a tool that i have ever seen.
I deeply enjoyed this! I have no need for tools but I love learning about cool engineering. How awesome.
As a guy that works in my "dining shop" in an apartment, can't wait to see your small space setup video(s). Can always use more ideas! Though honestly pretty happy with what I've created.
17:04 Adam....that show of making small maker spaces?
I'd watch tf out of that show & tested be a great vehicle for it.
I'd buy cable or another service for that show.
love videos like this! wouldn't mind tons more
Really great Video, thanks. Loved listening to you guys, also... need one of those mounted saws.
I would LOVE more tips for setting up shop/makerspace in my apartment.
Maybe it's because I just woke up and looked at my phone...why did I watch Adam introduce his twin!?!
Wake up earlier child
@@pete_smack 🤣🤣🤣
I'm lucky enough to own a Knew Concepts Ti birdcage saw. Piercing work has been one of my favourite things since the day I started training to be a jeweller - but the birdcage saw just made it several orders of magnitude more enjoyable and satisfying. My non-jeweller friends do think I'm stone-cold crazy to spend that much on one (in their eyes) rather unassuming tool but what do they know? Nothin', that's what!
The dime blew my mind!!
What a wonderful saw!
Nesting is a surprisingly complex topic, really interesting to hear how it affects design. I do some CNC work, and deepnest is a great software tool to look at nesting options.
I have an RBI Hawk fret saw that is modeled after many of the concepts but is motorized. What a good looking tool displayed in this context. I am also wowed and blown away!
Touché!
Simple and amazing
Cool as heck. I'm sure Lee is watching and enjoying all of this ! The first RT saw I made from scratch was sort of like that, and was good until Lee's old saw guide, and the prototype motor saw he made that I still use. This is amazing !!!
I looked at that fancy scroll saw machine with the same awe that Adam did. It really is a WOW! The unfortunate fact is that you still need the artistic talent to go with it. That I do not have. Following a line with a blade is a skill that many lack and as the scrollwork gets smaller, the mistakes and mid course corrections are amplified and it doesn’t take long to make a piece unusable. So, faor the artsy people, here is a product to make the sawing part effortless. For those of us with the hands of a blacksmith, the bestest, elaboratist, expensivist tool won’t overcome our other problem. But from the point of a mechanical wonder, I love what you’ve created. 🥸👍👀✅
Nice job. Thank you 😊
Adam, you should look at the ships saw used during the Tally Ho boat restoration.
Twinsied!
Two brothers from different mothers!
Fantastic saws.
Awesome concept!
As a product dev engineer I feel the butterflies in my belly seeing such a cool KNEW concept like this. 🦋
Amazing saws, firstly! But secondly, I love the back-and-forth of each man wanting the saws in their hands :) "NO, I want to hold this magnificent object!"
Brian is too cool! I loved this.
Huge wow! And, the engineering isn't the only great thing about the saws - the price is actually affordable. It makes me so happy just to know this exists.
Beautiful piece of machinery ;) And very practical - especially jeweler's models.
Brian is fantastic! What a cool idea
Wow that is impressively awesome!
Jeez! It's been ten years! OMG! I REMEMBER WATCHING THE FIRST VIDEO!
I've owned a cabinet shop since 2011 and do we do all types of woodworking. I have a great fondness for cool/ well-made tools from American manufacturers. So I ordered a few of their saws just to have. But I could never see me using that large one. The tech now let's me do that type of stuff so much easier. I can even pull off the angles using v-bits.
I used to be all for doing everything by hand, but hands make mistakes. Cnc tools rarely do lol
Having people like this on your channel is one of the myriad reasons why I'm always drawn in when watching Adam.
I absolutely need one of these for various reasons so now I know it exists. 😂 I didn't even think I child find this kind of tool so...
Thank you Adam for being the quintessential maker.
Amazing! Wish I could afford one, it truly is a work of art.
Great video Adam sir 😊
Wow! Amazing, I Neves seu it. Thankyou.
No joke, i used fret saws for years and years. Then saw adams video 10 years ago, bought one and absolutely loved it. Seriously a well made and worth it tool
What do you do with this saw? Not just you, but in general?
@jaxistheman1 a fretsaw? Or that massive deep throat (hehe) marquetry saw? Because that saw it used to do precision work, such as cutting out parts used in fancy woodworking inlay work caled marquetry. Or even. Metal inlay work as well.
A fretsaw can do similar work, but is also good for cutting out the waste between dovetail joints. It's also used to cut the slots in the neck of guitars that frets are installed into (thus the name). Some call it a jewelers saw (how I best know it from my former trade). We used the. Ofte. To cut small metal parts such as tbe shanks of rings.
That thing is mind blowing and such beautiful engineering
I just recently bought one of their Mk.IV fret saws with swivel blade clamps and am really impressed how much better it works than my swiss made Grobet fret saw
I don't think I will ever have a need for a Marquetry Saw but I want one just to stare at it longingly and show it off to people. LOL What a beautiful piece of engineering.
OG Tested subscribers will remember Adam saying...
"I can't wait to see that."
10 years later it finally pays off.
I do Marquetry for Urns and I do it mostly just with a jewelers fret saw by hand. I might have to get one of those someday.
Please @Tested, more of this!
"Can we see this go?" Peak Adam Savage right there.
Making miniature maker spaces, a show I'd watch that. Clickspring's space is amazingly small.
Yep, I think is brain is bigger than his shop. Clickspring is so inspiring yet also depressing "I will never be that good...." So I spend a lot of time thinking about making CNC machines that will do that for me.
Good to see Adam and his older brother working together
Manual scroll saw, I could see this being useful for intricate medal work like jewelry, not so much for woodwork. I could see a fairly large learning curve in order to operate this saw correctly. Definitely a neat idea and cool to see.
Awesome guest!
THAT'S MY BROTHER-IN-LAW! HI, BRIAN!! :) (Oh, and the saws are the GOAT!)
I currently do all of my woodworking on a 3'x5' balcony, with as much flat pack workspace as I can. I am seriously looking forward to you putting out a small workspace series, even if it's more of a TedTalk.
I'd love to see Adam watch or even better visit My Mechanics. I've been watching his videos for years and I know Adam would love that.
I have no immediate use for a precision saw at this time but I greatly appreciate the genius and engineering that went into solving the tool design problem.
So its basically a hand powered scroll saw that's way more accurate. I want one.
For only $2400, you can own one.
@@halfstep67 700 for the smaller one which is not bad really
I own one of their Fret saws and love the thing that beast would be awesome if i had a place for it.
i love my scroll saw wish i had one this nice
That be a very fun specialty scroll saw.
Dude! I had a design for a nearly identical saw a couple years ago. I think I'm gonna have to buy one of these.
Super cool. I actually have one car garage I’m using as my own workshop. That’d be super cool if you did a show on helping people make their own workshops. I’d love to pick your brain on how I could utilize my space. Great video again!!!
People saying the chain drive cast iron coping saw has an answer: have never actually used it. If it was useful, there would be more of them around. The fact there aren't more examples shows the people at the time it was made saw no need for it. If Christopher Schwarz couldn't find a reason to have one, it is just a curiosity from the past. It is a tool shaped object.
17:21 chicken soup 🍲
We now demand that Adam show tiny shops around the country, he can start here in surprise, AZ at my house and my work shop we help transform from a 30 municipality fleet to a shop for parks and recreation maintenance. We build all sorts of things that would “make” Adam happy look forward to seeing everyone here in AZ ! Come on tested
Forget Tiny Homes, I want a Tiny Shop but if I had one I would need a bed in there because I would never leave.
that saw is awesome
Great stuff. I have two Knew Concepts saws and love them. I’ve thought about doing marquetry and if I do I’ll take a close look at that saw.
I love these, they look more like piece of art
That is one cool saw!
The chain drive keeps the saw blade from twisting when you change the blade angle (each end of the blade move together angularly). You spin the blade to get the frame out of the the way of your work.
that was most amazing ad for 19 minutes that I've enjoyed! oh if only all ads where like that ha ha
Good one ❤
I use your saws for coping trim. I love Knew conceots saws
You should also check out the Bridge City Joint Master Pro.
I have a scroll saw I use all the time, it is awesome to see one that isn't powered.
When I saw that "3D saw" structure the only thing that came to my mind was "hey, that looks like some part of the Death Star" xD
Somewhere I have a photograph of my Grandfather as part of a crew building a 2 story house here in Victoria, BC. Now, in modern times we have pre cut 4x8 sheets of plywood and the studs in houses are placed to make it easy to just slap those suckers into place. This photo I have is from the 1920s, or maybe early 30s. They had no power tools or air nailers. Here they were, on ladders running a SINGLE piece of plywood, on the angle from ground to roof line, holding it in place and hammering nails into it. So while you may think no one would do that gingerbread cutting while up a ladder - you may be surprised. It was probably better to put the solid wood in place then cut to reduce the risk of breakage.
I’m 2mins in and “they stopped screwing up so we ran out of it!” is already my new favourite quote
I'd kill for a 1 hour shop infrastructure build video. hint hint!!!!!!
If the bench pin is set at a slight angle to make tightly fitting marquetry, then rotating the blade to cut backwards would also invert the tilt angle of the cut. Does the saw have a mechanism for moving one end of the sawblade off the rotational axis to create a consistent tilt for any cutting direction?
I would think you would need to rotate the work piece along with the blade to maintain the angle needed in the work piece but the angle of the saw is fixed
Next up? A machine powered version, where you only have to control its direction.
We didn't really get into that, and worse, the bench pin you see in the video isn't the normal one for that saw. The normal one doesn't tilt. But it somehow didn't get loaded when I packed the truck. So I winged it with the pin we did have. The way the marquetry saw normally does angles is that the entire guide tower tilts, rather than the bench pin. (There's a protractor built into the pivot mechanism.) There is also a system to lock the blade swivels into 'straight-ahead' mode when cutting like that. Because you're correct: if the saw's tilted, and you try to cut in a direction other than perpendicular to the tilt, your angles will get fouled up.
@@KnewConcepts a foot pedal that would actuate the saw blade like an old foot powered sewing machine would probably be popular too. Awesome tools, keep on being awesome
NeilSedlak is exactly correct. That old saw is really cool and amazingly functional. Knew concepts does make cool saws. Check out Patrick Edwards at the San Diego school of french marquetry. He uses a chevolet saw that is really. Cool. The fine detail work he does is incredible. I really enjoy your show and your book. Thank you.
I saw that huge saw at Handworks this summer, and right next to them was a young kid with a large wooden marquetry saw. It was really interesting to see the two side by side. It was Christopher Schwarz from Lost Art Press that he mentioned, right?
So cool
MAKE THAT SHOW!
7:20 - SNAP!
TITANIUM!!
Adam, please make the TV show happen to bring maker shops to people's tiny apartments! I know that you don't want the effort associated will filming a show, so I'd be happy to see you provide remote guidance at the beginning and reaction at the end of an episode.
The idea of showcasing small workshops in improbable places is an idea that obviously strikes a chord with many of your viewers, as evidenced by the comments below. I belong to a Pen Turning organization and I met a man at a show. He was retired and he and his wife lived in a one bedroom apartment, giving him no work area at all. He convinced his wife to give him the hall closet. He then built in a workspace where he could bring out his lathe and turn pens to sell. His wife said ok but when you’re done with each and every work session, the tools get put away out of sight and the mess gets cleaned up. Immediately. He loved her for her strict rules because it made him be as neat and efficient as possible. He got out of the habit of laying any tool down on his work table but into the habit of placing everything back on its hook or in its box. He knew he had to have a place for everything and kept everything in in its place. It made the breakdown, put away, clean up process a breeze. He made beautiful pens and derived a good income stream for his efforts.
Please make that TV show, Adam!!!
17:00 - When I lived in an apartment, and constantly wanted to do woodworking, I had this dream idea for a soundproof saw box big enough to put an 8' long plank of wood in, line up the cut, then close it, and it would make the cut for me in completely silence, or at least no louder than a quiet television, because I'm also a night owl, and wanted to cut lumber at 3AM without annoying any of my neighbors. I wondered if there was a way to close over the plank, so it could be a smaller thing, with the lumber sticking out the sides, with some kind of baffles that pressed around the wood to block the sound, but I think there'd be no way to get around the parts sticking out acting like big speakers, transferring the sound to the air outside the box. I daydreamed about it so often - could it double as furniture, like a couch that flipped open, because apartments aren't that big? I also wondered about a very slow system, like 3D printer slow, where I could at least get a cut done over the course of an hour (or several), where it was more like hydraulic force, and a very well sharpened saw that acted like a bunch of chisels, akin to a broach cutter. Then I rented a house with a garage, and the dream evaporated, and then I bought a house with a big garage, so... I'd still love to see some solution for apartment dweller makers.
I'm alittle confused at Brians lack of understanding what a coping saw does,
Ive used Coping saws for all kinds of projects for the past 45 years, the ones i use have swivel ends but you have to swivel them yourself both independently and try to match them up, so to have a coping saw that rotates both ends together is genius, i could think of numerous reasons for needing to rotate the blade