Adam Savage Learns Precision Jewelry Cutting!
HTML-код
- Опубликовано: 2 янв 2025
- Thanks to IPVanish for supporting this video. Try it out at www.ipvanish.c...
After Adam runs into difficulty making precision cuts of brass for his latest Crown Jewels replica build, he invites Knew Concept's Brian Meek back to the cave to give him a lesson and demonstration of jewelry cutting techniques using Knew Concept's titanium fret saw. The improvements are almost immediate and Adam is blown away at the difference in his work!
Knew Concepts saws and tools: www.knewconcep...
Shot by Josh Self and edited by Norman Chan
Music by Jinglepunks
Additional media courtesy of Knew Concepts
Subscribe for more videos (and click the bell for notifications): www.youtube.com...
Join this channel to support Tested and get access to perks:
/ @tested
Tested and Adam Savage Ts, stickers, (de) merit badges and more: tested-store.com
About Tested: www.tested.com...
TikTok: / testedcom
Instagram: / testedcom
Twitter: / testedcom
Facebook: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/...
Intro bumper by Abe Dieckman
Thanks for watching!
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Thanks to IPVanish for supporting this video. Try it out at www.ipvanish.com/tested
Knew Concepts saws and tools: www.knewconcepts.com/
I hate these knockoff vpn companies. Your IP doesn't vanish. Your connection can be tracked by variables other than the ip, but the remote side needs your ip Otherwise you don't get replies.
The solution to the ads and tracking is a firewall. Block connections too and from ad and analytics sites before it leaves your device. But of course Google/Apple blocks users from using an on device application obtained through the store for these functions because they depend on those forms of data feed.
You are paying a third party and they get to see all of your traffic. They can use a certificate within their app which allows them to decrypt all of your traffic and any 'encryption' they use is only valid between your endpoint and their service. It gives anyone who wants to listen an aggregate data stream to monitor and there is no way to validate that any particular country is backending their service.
VPNs are designed to link 2 secure locations not you and an intermediary. End to end, not end to middle.
Brian has that calm knowledgability in his tone that you only get by experience teaching people for years and watching them make mistakes. It's almost instructive to watch him guide Adam through this because he has a finesse to how much he lets Adam wander off the path before gently guiding him back with advice that getting a little off-path has prepared Adam in real-time to see the value in the advice.
I thought the exact same thing, he would redirect Adam away from a mistake before Adam realized he was making a mistake and before there were consequences. It was wonderful to watch.
The nature of learning jewelry techniques and concepts lends itself to this mode, and in my experience most of the best instructors will teach exactly this way. It's a deeply intuitive way of making.
Beautifully written, @Merennulli. I 100% agree.
More Brian please, he's both hilarious and knowledgable 😂
"Trust me, I grok" lol
My favorite part about this channel is the numerous tips and tricks for makers, explained in layman's terms while teaching professional jargon.
I'll never be a maker of this caliber, but it Adam and friends have drastically improved my construction and repair skills by helping me think differently. Plus I have a passion for sewing now.
"You are more than just eyeballs with feet" is a really great quote for encouraging people to use more of their senses, to listen and touch, in order to learn about the world
I was a customer service person at a weaving shop for years, handling all the highly technical issues. The day I took a call from JPL and was able to help them out was a really good day for me, too.
I LOVE LEARNING FROM EXPERTS!!! What makes it even better is that Adam is insatiably curious and is great at asking questions and creating situations for the expert to demonstrate their knowledge and proficiency.
Man, how did I not know about this channel! 2024 is gonna be awesome 😎
Welcome to the insanity! Glad to have you!🎉
It's up there with Tom Scott as one of the best RUclips channels for geeks and nerds who like to learn :)
Welcome to all things good
Welcome to the family! There's lots to enjoy!
I remember my first time...
Appreciate the video! I'm a jewelery-specific maker and metalsmithing instructor so can really appreciate the instruction Brian has given. Sawing and piercing can be meditative practices if you just let the saw do the work. Blade lubrication helps, but just listen to the sound of the blade, hold it perpendicular to the work, and just like with any metal working firmly stabilize the piece with your grip - that will cut down on the chatter.
What lubricant?
@@cholulahotsauce6166 there are several industry sold products like, Bur-life, Blade Butter, etc. but beeswax or candle wax can work as well.
@@cholulahotsauce6166 The commercially produced option of choice is BurLife (sold by Rio Grande) or something like it. Many small shops traditionally use a bar of Ivory soap or a hunk of beeswax. I find the cheap options to be just fine for my level of work. You run your blade through it once before you begin, and occasionally as you're cutting - it extends the life of the blade and the maker (by reducing your stress level).
One neat trick I learned as a jeweler is that it can be difficult to cut into sharp triangle corners with these saw blades, so what I do is use a diamond lap to make the cutting edge of the blade into a narrow angle. It works incredibly well when you have to cut super intricate patterns in thin material.
My approach is slightly different, I would cut down one side of the triangle into the corner, then back up the cut by a few millimetres, e.g. 5 mm then cut across the waste material to the other side of the triangle and cut into the corner approaching from the other side. Once the little triangle waste falls out you can then carry on with the rest of the outline. If the triangle corner has to be a clear V shape I would finish off with a suitable needle file.
Adam, you’re tilting the saw forward which causes the blade to dig in instead of drawing straight down and letting the saw do the work. If you rewatch your video and look at how Brian holds the saw and how you hold it you will see the difference.
Agree - that's the trick, hold it vertical the hand is just pushing the blade up and down and steering, the forward motion just happens as the blade cuts. The only time I would tilt it slightly is for really thin sheet, e.g. sometimes end up cutting 5 thou nickel-silver sheet as it effectively makes the sheet slightly thicker.
Brian fixed that by having him hold the saw differently. He never said stop tilting the saw, but the change in grip fixed the problem immediately.
@@PatrickPoet I never saw Adam correct the angle of attack on the cutting stroke. My hobby for the last 50 years has been making and repairing Intarsia inlays and Marquetry for wood furniture and I’m not embarrassed to say I’m good at it. So you may want to rewatch the video and see if you can spot the difference between Brian’s and Adam’s technique.
@@PatrickPoet When learning to use the piercing saw holding it vertical is the best advice IMHO as you practice just moving the blade up and down and not applying any forward pressure, the cutting action allows the blade to move forward of it's own volition. Having the blade vertical makes cutting corners or any change in direction much easier. Once you have the feel of the cut and comfortable with the saw then there are circumstances where tilting the blade helps. I'll cut 5 thou nickel silver sheet with a 6/0 blade, tilting helps because it effectively increases the thickness of the material.
When teaching folks who have any previous making experience, I always refer to a scroll saw. "Imagine you're the machine" gives people a great reminder to use right angles and stop pushing.
It's so fun seeing someone learn stuff. Especially when they are having a good time!
We blacksmiths have been cutting 14 ga and 18 ga sheet steel with the #6 and #7 blades for years. I even sawed out a 1/4" thick sear for a pistol out of 4140 with one. Had similar experience as you when I first started. Getting about one inch per blade. Now, even in steel, 6 to 8 inches, then dull, not broken.
I bought one of their saws after seeing your original video with Brian, I'm a modelmaker in the UK (its a piercing saw here) and usually cut Nickel Silver sheet with mine, using either 5/0 or 8/0 blades, dependent on sheet thickness..
Its SO much better than my old cheap saw frame. I also have one of their steel bench pins.
Take your time to learn how to use it and it will be the best tool you own.
Thoroughly recommended
20 years ago I had freshly graduated from violin making school and took a summer violin bow making course with Michael Vann. Never used a jewelers saw before and broke all of Vann’s jewelers blades the first day making a template. 20 years later, he still calls me “blade”. Now a jewelers saw has many uses in the shop. The trick really is to let the saw sit in your hand and only move the saw without holding it. Cut the final shape, use the force, you are a Jedi
It's my favourite brother-in-law again! Hi, Brian! See? I DO watch these!
Possibly one of the most vital videos ever made on Tested. I have one of these Knew Concepts blade handles. I bought it when Adam first had Brian as a guest. Learned tons today!!
i took one jewelry class in college and am now an apprentice jeweler, it’s very reassuring to see adam making similar mistakes as i have done. also that saw is so much better than mine, i might have to get one…
Knew concepts make awesome saws but don't undersell an old german saw frame. It'll get you by for as long as you're in the business for all of $5.
They're gorgeous and manly but way overengineered... I use a student model from Rio that was like $5, 20 years ago
This was so wonderful to watch. I have not spent a lot of time trying to learn but I could see myself making those same mistakes. This guest is a wonderful teacher who is able to explain things in a very understandable way without overwhelming us with useless information. I feel like I really got something from this video that is rare these days. And Adam’s newfound enthusiasm is infectious.
I love Adam’s enthusiasm for learning new stuff. It’s contagious
Yes, this guy knows in his bones what he's doing.
Extremely refreshing from the normal frantic content and manic personalities normally associated with 'making'.
I had a welding instructor in highschool that was similar in his nonchalant bone knowledge of the subject. It's surprising how fast you can begin intuiting processes with the right teachers. I know aptitude and working knowledge are big factors too.
I agree, i love how confident he is and yet so reserved and casual about his skills.
Some pieces that Adam might've struggled with for days, he'd probably go: "Oh yeah, i can do that in an hour or two. All i need is a steady surface and a cup of coffee", without making it sound like a brag.
And i do like his approach, practice first, explanation later.
It helps for me as well, once you 'get' how it works, once the basics click, you'll recognize the different steps and approaches, instead of doing it the other way around, as i feel that the labeling and compartmentalizing of things messes with the natural flow of learning, at least, in my experience.
As a long time professional jeweler I use 8/0 and 4/0 every day. If you want to get really good at using a jeweler's saw, cut some 2" copper or brass squares from thin sheet, draw intricate designs on them, and then cut them out. Now drop the cut squares into a slide projector and blow up the image on a wall and look for defects. Keep working at it until you can get really clean, smooth cuts. After some practice, you'll find it's amazing just how fine and accurate a line you can cut.
When I was an apprentice jeweller, the first thing my boss taught me was sawing and saw piercing. We only had a normal frame that you'd press into your sternum to flex the saw frame to fit the blade (we used 2/0's exclusively). Move the frame away and it would spread apart and tightening the blade.
He told me (this is 1982 btw) to let the saw do the work. We used bees wax as a lubricant. But long gentle strokes. A lot of the time, we would be holding the work in our fingers , leaning against the bench peg. But sheet, it was on the say peg.
I'm actually suprised Adam hadn't used these before. Glad he is onto it now though !
I got one of those saws last Christmas after seeing Adam use one. One of the best and most useful tools that I have! These instructions are very useful!!!
Hi Adam! Hope you snd the team are doing great! Thanks for all you guys do! Always fun to watch you make these cool projects
Finally! A fret saw and a jewellers saw are the same thing.
Thank you!❤
A couple things I noticed here: Brian keeps the saw perpendicular to the floor, and his arm is on the outside of the work, where it seems Adam was fighting with an angled saw, and his arm inside the work (towards the table instead of having room to work outside the table). Just observations of things I'd probably do myself without thinking, but can be noticed on reviewing video. Cool to see the "tech" that goes into something as fine as jewelry making.
What a fantastic teacher. Insightful, observant and patient!
Love this video
Adam should really consider coming to Adepticon in March. Registration opens Jan 7th, but a class would be really cool.
Adam learning is my favourite type of video
Adam, I really do love watching you learn and discover new processes. Rather it was a self-taught lesson or learned from an expert, you are the personification of having fun learning and making mistakes.
Running the blade across some candle wax helps make the strokes smoother. It also keeps the teeth from packing up.
little video error i hear something on 22:53 like an outro or intro sound
"you'll know when you need it" is such good advice. I say it all the time in photography land about some of the more wild equipment out there
Amazing! Also, use some sort of blade lubricant, like Rio Grande's Bur Life, basically a wax you cut into to coat the blade for each cut.
I’ve cut with an #8 00 blade and the kerf they made on my jump rings were negligible and good enough for soldering.
haha then I'm over here using flush cuts and reversing the cutters to make two flat sections and pushing them together
Such a great lesson! My earliest memory of getting good cutting with these blades was when my father handed me one blade and a penny with some holes drilled in it, and I used it to cut out almost all the empty space around Lincoln's head before needed a second blade.
For anyone trying to learn to get good with this, I'd say to just buy a gross of blades and keep at it until your arm and fingers learn what they need to do. I go with a loose grip, kind of like you see on a fencing foil, because white-knuckling the handle is a sure way to snap blades quickly.
Adam,the scrollblades are very usefull when your part is to big to rotate inside your sawhandle. The swiss blade brand is Pegas.
Buying a Knew Concepts saw was one of the best tool purchases I ever made as a jeweller, the weight difference alone has saved my wrist hours of pain. Side note, as someone who has been introduced to so many tools through this channel, it's a weird feeling seeing Adam learning to use a tool that is such a mundane part of my life 😅
that was so cool:) I've used their stuff for years and how nice seeing a face. He hit the magic things, relax, don't push, march in place, how to get the right tension, how to tell which way the blade cuts. It's so strange how HARD it seems to learn this stuff because you're trying too hard. As soon as you relax it's magic. Thank you, thank you, thank you. I also contacted their service dept??? once to say that turning a knob took the screw out instead of unscrewing the knob from the screw. I told them I'd already fixed it with loctite and that I didn't need _anything_ from them, I just thought they'd want to know for quality control. They sent me new parts anyway which I never used and still have because my jewelry tools got stolen and I don't have the saw anymore. Sigh.
Really interesting, thanks Adam and the Tested team.
Those McMaster-Carr double-magnifier safety glasses are item 5116T11 (1.5 diopter), 5116T12 (2.0 diopter) and 5116T13 (2.5 diopter).
Great video, and Yes please have Brian back more often.
I love grobet, they make the best fine fìles and saw blades, hi from switzerland.
My favourite make of both!
Keep the blade vertical ! Love what you are doing , so cool , lg hans
Adam is a life long learner and it's very encouraging for us mere mortal makers. :)
This was so fun to watch. I’m a metalsmith and the Knew Concepts saw is my absolute favorite to use.
Absolutely loved using the Knew saws at work in England. Something that I severely miss and NEEEED in my own workshop now.
21:00 seeing bits of arcane knowledge passed along in real time is absolutely incredible
This is incredibly useful! I've been using a Knew Concept fret saw (one of the red body models) for a few years now, and they are indeed a bit tricky when it comes to properly loading the blade. This is an excellent demonstration!
Wow, great advice! Thanks guys!
Love the tips, especially about using all your senses. My jewellers saw is rapidly becoming one of my favourite tools.
Love listening to someone that knows their stuff!
@15:00 -- the guest remarks a few times 'this is the "kissing cousins" of the saw' ... what does that mean??
From the context, I think he's basically saying they are related or very similar, but he doesn't say cousins, he specifically says "kissing cousins" several times. So I'm kinda confused as to what he's trying to say 🤔🤷♀️🤔🤷♀️
a "Kissing Cousin" is one you are related to, but so distantly that you won't get in trouble for 'kissing' them...(wink, wink, nod, know what I mean?)
@@VAXHeadroom -- aaaah, ok. Got ya! Thank you 😃
My friend is a goldsmith, and she gave me a very similar lesson last year when I needed to cut out some brass I acid etched.
Worked in the jewellery trade for a number of years and the best tip for piercing work I ever got is to run the blade through some candle wax, it works as a less messy lubricant than oil and whatever else you may want to use, and it's dirt cheap.
I literally did not understand a single word of this, but I loved every second!
Well well well I need to cut some fine detail in a piece of Brass ADAM You've just helped me so much. Thank You both!
I've been a production bench jeweler for almost ten years now, mostly working with Sterling (.925) and Fine (.999) silver, followed by 14K yellow, rose, and white gold, and copper. I rarely have a need to do fine jewelry work such as what Adam was/is trying to do, because we have a production time of three to five business days. That said, I still use a 0000 blade in my saw. I've found it's a good balance of cutting vs. the rare turns I need to make, as opposed to the 000 blades I used when I started out.
My boss, on the other hand, can cut circles around me. She also started making jewelry when she was 15, so has been doing this for 31 years now.
This guy is one of my favorites! Reminds me of an old friend.
I have no idea how to do any of this and I love this vid. I hope someone who gets it can learn and hone their craft with this content. Cheers to you, would be a very cool trade to learn and be able to create. Thanks Tested team, super cool
I always enjoy watching you Adam, because your enthusiasm is as great as mine is with arts and crafts. It’s nice to see a fellow creator, having so much fun.😊❤
Just watched this, learned a lot about working with my coping saws (mostly for woodworking), already looked up the McMASTER-CARR safety glasses with magnifiers, & bought a pair. 😊
Let the tool do the work , best advice ever !!
Thank you for making this video. I'm a guitar builder and it took me a lot of blades and tears to pull of decent pearl and shell inlays.
IPVanish reminds me of relieving myself in the snow with a thick snowsuite
Awesome video! I wish Tested did more instructional stuff... I've learned much from Adam's builds, but this is concentrated goodness.
My jewelers saw has been my most used saw for 10 years, I only very recently bought a rotary tool with any kind of cutting wheel, so any time I've been crafting it has been the same combination of fine saw blade and a set of needle files.
I can't speak highly enough of them.
Hey Adam. Glad to see you moving onto more indepth metal handsawing. its a great way to relax...once you get some practice. Before the practice its even more frustrating. I find a 4/0 is my go to for most ornate sawing. I've got a new concepts aluminum model and I do like to use. But if you can find a good vintage saw with a narrow throat I find it a bit more accurate mostly due to having less material hanging behind the blade. I also have an antique 18 inch deep one... and as Brian said, don't use something like that unless you know you need it.
Some of these tips cross over from pool. A precise up and down from the elbow... Like the hanging pivot from the elbow in pool... Cool video. Thanks
Adam is happy!
Lots of good stuff!!!
I had the same problem using spiral blades.
I especially like the, “Keep marching in place…”
Sawing at a 90 degree angle will help tons!
Cheers Brian!
Brilliant video , Brian is a master , everyone could learn from him .
Adam's arm movement at 4:10 is ripe for giffing
You won my heart at "I grock" :) understanding on a deeper level indeed.
I actually just started with this myself. I wanted to learn how to make historically accurate trade jewelry and trade goods from the Colonial era for reenactors and how intricate it can be with the jeweler saws and also how and the way to use the saw so that you don't bind or break the blades.
Great job guys. Thank you 😊
I just refurbished 43 old fretsaws, all of which are now hanging from the ceiling of my shop. And now Adam is making a video about these saws. I can't see any more for now.
One very simple thing, which I often forgot at the beginning because it looks trivial, is to use the whole blade. Make the whole motion from one end of the blade to the other.
I really appreciate your technique includes bringing in other experts.
Brian Meek ROCKS!! 🤘🏻♥️
learned how to use these from a master jeweler when I was in art school, used them in a Delta walking beam scroll saw also, as long as they are tensioned properly
Great work sir 👏 👍
I wish you show some macro shots close up for the blades/saws :(
"Slow is smooth. Smooth is fast."
What a difference an expert makes!
Another very interesting person and discussion. Much learned in such a short interview. Thanks
I never knew I needed this this much
This was amazing. I have a hard time in many cases to do precision cuts in modelling. Now I have to dig into jewelers tools :D
I've been using one of these for just over two years making brass cuttings. I have posted some on my Facebook page and sell them. Made to order
Was not expecting a space science angle, awesome!
For those who didn't catch it and are looking for blades, the Manufacturers are called NIQUA and Pégas.
Good info
Today I learned, you have the same vision as myself. I baffle many by taking my glasses off and seeing better at close range.
Jakarta Diecast project used the jewelers file on RUclips to modify Hot Wheels cars. I bought a handle, grobet files and went to heaven !! The most used tool on my bench. Cutting brass tubes, cutting plastic and of course cutting open the doors of trunks of die cast cars:)
Great video! I didn't see that anyone mentioned using beeswax to lubricate the blade. They tend to last longer if you keep q small block nearby to drag them into occasionally.
🥰 i can't wait to work with jewelry again someday
Great lesson - never knew this until now - Thanks!
Straight up and down movements help smooth your cuts and lubricating the blade with bees wax helps them last longer