Appreciate this man, i've been looking for something that i can on the fly adjust levels for personal audio & stream, just ordered myself one to possibly replace my goxlr Very in-depth review, much appreciated
Is there a way to upload mic effects? I bought this yesterday and the mic FX are meh and it would be cool if Roland had a store where you could buy certain voice files to upload into the software
I cant hear myself or anything i can see the music moving up and down also the mic moving up and down but i cant hear anything i do use a usb micrphone but i have a 3.5 jack plugged into bridgecast and my headset.
Very helpful. I just ordered this device. I currently have system sounds and my mic on a different source. I use filters on my mic, is that no longer needed with this mixer? How do you equalize your voice?
Would voicemeeter have any purpose at all if you had the bridge cast? reason im asking is I have Voicemeeter as my source of sound control and how I hear due to a capture card needing it in order to use the sound.
I'm about to lose my mind so please help me out! Is there a reason why when you separate Bridge Channels "MUSIC, GAME, etc" you are not able to manipulate the levels in OBS with the knobs? For example, I turn down volume on the system knob, it turns down the levels on the STREAM (bridge cast) but the levels on "MUSIC (bridge cast) don't change. I'm trying to separate the channels so that I can capture all sources individually and remove music from the Twitch VOD. So far nothing is working and the actual device doesn't adjust levels on the specific channels, only STREAM.
@@tabtaste my mistake, missed the lower part. Try adding the same source twice, except only put one one recording track, not stream track. So implement my solution twice basically.
how were the gaming EQ preset settings derived and for which headphone have they been made for? The headphone you wear will have an equally large effect on the sound as these EQ settings Without knowing the headphone that the sound is going to be reproduced over, there's no way of knowing whether a certain frequency range is overrepresented or underrepresented. The EQ settings shown on the bridge cast seem to imply that e.g. for Apex you need 3 dB more energy at 1.2 kHz, but the fact is that individual headphones differ by much more than 3 dB among each other, so you can not possibly make a statement like "every headphone needs 3 dB more". For some headphones you'll need 3 dB, for others you'll need 1 or 6 dB. For others you may even need -5 dB.
question is there a way to play the sound effects thru your mic, for situations where you want to hear the sound and your not streaming. Like the bleep sound for example if I wanted to play it on discord, is there anyway to configure that?
Talking as a musician with no more than an akai mpc and a mic connected to an audio interface , may we say we are at the same audio quality preamps / audio converter a/d and latency of a focusrite scarlett 4i4 3d gen for exemple (that i own now, but no dsp effects no mixer etc) ? Thank you in advance
Hey there. So i just got the Roland Bridge Cast X and a Shure SM7B. Now i set everything up correctly but for some reason i can't activate Phantom Power (48V). It just won't let me.. Any idea why?
I find the GO XLR (shure sm7b) Noise Gate can leave a weird hissing sound when it closes, I can hear it in recordings and in my mic monitoring. Does the Bridge Cast do anything like this? Drives me nuts!!
The Bridge Cast is ALMOST the perfect piece of gear for me. The one thing I wish it had was the ability to connect to two separate computers over USB. I am using a two PC streaming setup, and so currently I have mine hooked up to my gaming PC over USB so I can mix the audio, then use line out to record into my capture card. I still am able to mix the audio on the fly, but with respect to recording it only gives me the stereo mixdown to record. I suppose I could run Audacity or Reaper to record the multitrack audio on the gaming PC and then mix in post if needed, but it would be a nice QoL feature.
For dual pc setup, why not gone for Lewitt Connect if not go for Rode streamer X or Duo? Can´t understand why componies are not producing a device for dual setp. Another downside for me you can connect speakers only via ONE line out thats ridiculous in these days. how much gain does it have? Can´t find any information about. But as what I see its not even 60db I use a Presonus IO24, ok has no real knobs-faders but an awesome app on tablet for it and best half the price, decent speaker outputs for left and right! For the price I wouldn´t change to there are better option. The one and only really interesseting thing in the Bridge Cast is the extra EQ for game channel, thats cool features which I miss in any other device.
@@DieTabbi Admittedly I had never heard of the Lewitt Connect at the time. Maybe if I was shopping now I would have opted for it. Reading up for it, it seems to have the bulk of features I would want plus the key features I am really enjoying on the Bridge Cast, so maybe I should give that one a look. As for the Rode, I don't really need the video capture capabilities of it as I am running an ATEM Mini Pro, which offers me plenty of video capabilities. As for the gain on the XLR input of the Bridge Cast, I think it's either 72 or 75 dB. It can handle some pretty hungry mics and audio quality is fantastic.
Thanks for this one Prawn. I thought about making a vid but then my gig got too busy, lol. I am curious about finding the ideal gain. It can sound muffled on a condenser when the mic gain is over 42db. I did go out of my way to look for a software/firmware update two weeks ago and to Roland's credit they had a Jan update available.
Hi dude, extremely helpful video, you probably saved me hours of playing around with it, but on Discord (with Headset, not XLR Mic), the mic pics up on the discord mic test, but not in calls. Have you experienced this, or know a fix?
Thank you for this video, it helps a ton. I wonder if anyone can help me solve why my game audio isn't controllable, is there a system setting that I need to designate? I went into the game audio settings and Bridge cast was already selected but greyed out, any help would be great. and thanks again for this video.
@@kungpaotristan odd, I see SYSTEM, MUSIC, GAME, and CHAT in my Windows sound output options and I only have the PC USB cable plugged in. I made sure to toggle on the back. Did you need the 5V plugged in as well? Mine is not plugged in. @The Provoked Prawn I did install the standalone device driver form Roland US site, rebooted and then installed the software before using the device.
I'm also unable to see the Channels menu on the app, have tried reinstalling, rebooting, switching the PC and console mode and nothing seems to help...
use the quick button beside it as a "mute mic" for all button and press them both simultaneously. best solution i can offer you. or use a foot pedal switch for muting mic
setup bridgecast (stream) as an audio input source. it seems counter intuitive but I just fixed mine doing this. knobs control stream audio now as well.
Appreciate this man, i've been looking for something that i can on the fly adjust levels for personal audio & stream, just ordered myself one to possibly replace my goxlr
Very in-depth review, much appreciated
Did you get yours? How's it compare to the goxlr for you?
Thanks very helpful. The multi-track section was good.
👍
Is there a way to upload mic effects? I bought this yesterday and the mic FX are meh and it would be cool if Roland had a store where you could buy certain voice files to upload into the software
I cant hear myself or anything i can see the music moving up and down also the mic moving up and down but i cant hear anything i do use a usb micrphone but i have a 3.5 jack plugged into bridgecast and my headset.
Very helpful. I just ordered this device. I currently have system sounds and my mic on a different source. I use filters on my mic, is that no longer needed with this mixer? How do you equalize your voice?
2:40 Internal DSP for Mic Input
Would voicemeeter have any purpose at all if you had the bridge cast? reason im asking is I have Voicemeeter as my source of sound control and how I hear due to a capture card needing it in order to use the sound.
I'm about to lose my mind so please help me out! Is there a reason why when you separate Bridge Channels "MUSIC, GAME, etc" you are not able to manipulate the levels in OBS with the knobs? For example, I turn down volume on the system knob, it turns down the levels on the STREAM (bridge cast) but the levels on "MUSIC (bridge cast) don't change.
I'm trying to separate the channels so that I can capture all sources individually and remove music from the Twitch VOD. So far nothing is working and the actual device doesn't adjust levels on the specific channels, only STREAM.
Did you find a solution ?
set bridgecast (stream) as an audio input capture, don't use it for output capture like you think it would be for!
@@tabtaste check my reply to their comment
@@aquaticcactus9897 but this dont fix the question right ?
@@tabtaste my mistake, missed the lower part. Try adding the same source twice, except only put one one recording track, not stream track. So implement my solution twice basically.
how were the gaming EQ preset settings derived and for which headphone have they been made for? The headphone you wear will have an equally large effect on the sound as these EQ settings
Without knowing the headphone that the sound is going to be reproduced over, there's no way of knowing whether a certain frequency range is overrepresented or underrepresented.
The EQ settings shown on the bridge cast seem to imply that e.g. for Apex you need 3 dB more energy at 1.2 kHz, but the fact is that individual headphones differ by much more than 3 dB among each other, so you can not possibly make a statement like "every headphone needs 3 dB more".
For some headphones you'll need 3 dB, for others you'll need 1 or 6 dB.
For others you may even need -5 dB.
I don't have the "channels" menu on versions 3.01, has that been removed or am I missing something?
question is there a way to play the sound effects thru your mic, for situations where you want to hear the sound and your not streaming. Like the bleep sound for example if I wanted to play it on discord, is there anyway to configure that?
Talking as a musician with no more than an akai mpc and a mic connected to an audio interface , may we say we are at the same audio quality preamps / audio converter a/d and latency of a focusrite scarlett 4i4 3d gen for exemple (that i own now, but no dsp effects no mixer etc) ? Thank you in advance
Hey there. So i just got the Roland Bridge Cast X and a Shure SM7B.
Now i set everything up correctly but for some reason i can't activate Phantom Power (48V). It just won't let me.. Any idea why?
The shure SM7B doesn’t need phantom power because it’s a dynamic microphone.
I find the GO XLR (shure sm7b) Noise Gate can leave a weird hissing sound when it closes, I can hear it in recordings and in my mic monitoring. Does the Bridge Cast do anything like this? Drives me nuts!!
The Bridge Cast is ALMOST the perfect piece of gear for me. The one thing I wish it had was the ability to connect to two separate computers over USB. I am using a two PC streaming setup, and so currently I have mine hooked up to my gaming PC over USB so I can mix the audio, then use line out to record into my capture card. I still am able to mix the audio on the fly, but with respect to recording it only gives me the stereo mixdown to record. I suppose I could run Audacity or Reaper to record the multitrack audio on the gaming PC and then mix in post if needed, but it would be a nice QoL feature.
For dual pc setup, why not gone for Lewitt Connect if not go for Rode streamer X or Duo? Can´t understand why componies are not producing a device for dual setp.
Another downside for me you can connect speakers only via ONE line out thats ridiculous in these days.
how much gain does it have? Can´t find any information about. But as what I see its not even 60db
I use a Presonus IO24, ok has no real knobs-faders but an awesome app on tablet for it and best half the price, decent speaker outputs for left and right!
For the price I wouldn´t change to there are better option.
The one and only really interesseting thing in the Bridge Cast is the extra EQ for game channel, thats cool features which I miss in any other device.
@@DieTabbi Admittedly I had never heard of the Lewitt Connect at the time. Maybe if I was shopping now I would have opted for it. Reading up for it, it seems to have the bulk of features I would want plus the key features I am really enjoying on the Bridge Cast, so maybe I should give that one a look.
As for the Rode, I don't really need the video capture capabilities of it as I am running an ATEM Mini Pro, which offers me plenty of video capabilities.
As for the gain on the XLR input of the Bridge Cast, I think it's either 72 or 75 dB. It can handle some pretty hungry mics and audio quality is fantastic.
is there any clever way to add like a pspotify track that can be streamed to twitch but deleted off the vod?
Thanks for this one Prawn. I thought about making a vid but then my gig got too busy, lol. I am curious about finding the ideal gain. It can sound muffled on a condenser when the mic gain is over 42db. I did go out of my way to look for a software/firmware update two weeks ago and to Roland's credit they had a Jan update available.
Hi dude, extremely helpful video, you probably saved me hours of playing around with it, but on Discord (with Headset, not XLR Mic), the mic pics up on the discord mic test, but not in calls. Have you experienced this, or know a fix?
Thanks for the good video. Can I play background music from the same pc? If yes how? Through the aux in or how?
did you get this sorted? the answer is yes and it can all be done through windows audio settings with the bridgecast
Thank you for this video, it helps a ton. I wonder if anyone can help me solve why my game audio isn't controllable, is there a system setting that I need to designate? I went into the game audio settings and Bridge cast was already selected but greyed out, any help would be great. and thanks again for this video.
Does this work on Mac now ?
how come i hear a static noise coming through my headset when plugged into it
How do I turn of mic monitoring please prawn please.
How'd you get those different channels to show up in windows? The only bridge cast option for me is "Digital Audio Interface (BRIDGE CAST)"
I found that was an issue if you don't have both power and the usb connection plugged in
@@TheProvokedPrawn That did the trick! Thanks a ton my friend :) Odds you'll upload a recommended voice settings video next?
@@kungpaotristan odd, I see SYSTEM, MUSIC, GAME, and CHAT in my Windows sound output options and I only have the PC USB cable plugged in. I made sure to toggle on the back. Did you need the 5V plugged in as well? Mine is not plugged in. @The Provoked Prawn I did install the standalone device driver form Roland US site, rebooted and then installed the software before using the device.
@@DKTD23 Hey, for me changing the state of the switch from console to PC and then rebooting did the trick
I'm also unable to see the Channels menu on the app, have tried reinstalling, rebooting, switching the PC and console mode and nothing seems to help...
I've found that Beep SFX doesn't mute microphone input while it bleeps, making it essentially kinda useless for censoring swears
use the quick button beside it as a "mute mic" for all button and press them both simultaneously. best solution i can offer you. or use a foot pedal switch for muting mic
Hello, does this support Linux ?
Can you do this same thing for the Bridgecast X
Will be
@@TheProvokedPrawndid you do it?
still wonder how i lower or raise the volume for what they hear on my stream, isna't that why they have dual buses?
setup bridgecast (stream) as an audio input source. it seems counter intuitive but I just fixed mine doing this. knobs control stream audio now as well.
@@aquaticcactus9897 thx for the tip could u make a video of that so it is easier to se what to do?
@@spelworldstream yes, I can indeed.
@@aquaticcactus9897 thx
@@spelworldstream video is uploading to my channel as we speak. literally zero editing involved so mind the few minor slips :)