I added some 3M automotive grade double sided tape on my clips. I lost BOTH sides between the front bumper and the front wheel, and I installed the replacements with double sided tape. They never fell off as long as I owned my Cutlass.
Hey can you make a video showing how to remove the chrome panel on the bottom of the door correctly? and also showing how to put the chrome back on correctly. If you can it would help me so much
Awesome video bro I had messaged you a few weeks ago on Instagram about how to install or remove the rockers to give a good idea of how to do it properly so they dnt get damaged or bent in the process. Thanks good video 👌🏽
Great advice and video, just one comment is that those lower body moldings are not "chrome" plated, they're polished "Stainless Steel" to my knowledge. The wheel opening moldings are SS as well, which is nice for two reasons, you can usually find them used in excellent shape (no rust, tho sometimes with minor dings/dents), and they polish to a "chrome" like shine very easily with some polish and elbow grease. Wish all the upper body moldings were stainless (like older cars) instead of the crappy anodized aluminum that pits, oxidizes and looks all chalky over time.
Hey Brian I was trying to apply the big chrome on my drivers side door and I broke a couple clips. do you have any tips on how to apply it correctly? Or can you possible make a video showing how to do so? thank you so much
Looking for a link to the video on how to remove and install the new clips and replace the chrome. I'll double check my book as it might be in there as well, but videos are so much more informative sometimes as we get to see it done.
I have a 86 regal and want to put chrome rocker panels on the front fenders and the back. It has the original ones in the middle. Do you think the panels of a cutlass would fit the front fenders and the back of a regal???
GM 14005390 is the part number for the one on the doors. I found them for 13 bucks per 4 clips...my mc ls needs 7 or 8 per door...i think I found the ones for the front fender also.
nice vid buddy one thing the chrome thats behide the door that have lil circle clips thats made out off metal they dont fall off like talking abt it just thought i sure that with you
Brian, Thanks for this. My front piece is loose on my 1988 Cutlass Supreme Classic. Can you please provide more information on where to buy the plastic clips.
I wish I saw this video 2 years ago. Yep I'm missing chrome pieces one of them fell off when we went to Walmart and we picked it up on the way back. It's dented. I'm still missing 1 piece for sure
i have an 84 monte carlo and i want to remove my chrome rockers is there a video on that? or is it just like this, you just slide them out? also with the clips are they screwed in or is it glue
hey Brian I was interested of purchasing those front fender chrome's, if you have them available how can I get in touch with you to buy this chromes...
Thank you for the video. I have looked everywhere and cannot find these plastic fastener clips. Any other suggestions on where to look? Thank you, David
I am going to start doing short 1min how to vids on my Instagram page. Please follow @classicgbodygarage they simply slide over the nub in the window channel.
Do happen to have any trim for sale. I need the front pieces between the front bumper and tire and also the passenger side piece from between the door tire
I have the smaller passenger side piece between the tire and door, sold the front most fender piece on both sides. As mentioned in my video, first to get sold. email me olds7980@yahoo.com
The fronts were sold right after this video, I have the other pieces for the most part. Email olds7980@yahoo.com they are in driver condition, not mint condition.
yea if it don't fall off he never sead he broke the clips on till after he glued it on if it falls of he sighed a paper he ads to paint the ohul car over and fix it right lol
Follow Classic Gbody Garage for the latest project updates! Thanks everyone!
Subscribe: ruclips.net/user/classicgbodygarage
FaceBook: facebook.com/groups/classicgbodygarage/
Instagram: instagram.com/classicgbodygarage/
I added some 3M automotive grade double sided tape on my clips. I lost BOTH sides between the front bumper and the front wheel, and I installed the replacements with double sided tape. They never fell off as long as I owned my Cutlass.
Hey can you make a video showing how to remove the chrome panel on the bottom of the door correctly? and also showing how to put the chrome back on correctly. If you can it would help me so much
I can work on that. Thanks for watching and for the suggestion.
@@ClassicGBodyGarage Did you ever make a video showing those procedures?
I have an 86 monte Ls I would like to take off the molding but not sure how any advice please would be a great help.
Any updates?
@@ClassicGBodyGarage I need this too
Awesome video bro I had messaged you a few weeks ago on Instagram about how to install or remove the rockers to give a good idea of how to do it properly so they dnt get damaged or bent in the process. Thanks good video 👌🏽
Glad I could help
Great advice and video, just one comment is that those lower body moldings are not "chrome" plated, they're polished "Stainless Steel" to my knowledge. The wheel opening moldings are SS as well, which is nice for two reasons, you can usually find them used in excellent shape (no rust, tho sometimes with minor dings/dents), and they polish to a "chrome" like shine very easily with some polish and elbow grease. Wish all the upper body moldings were stainless (like older cars) instead of the crappy anodized aluminum that pits, oxidizes and looks all chalky over time.
flat chrome is stainless, wheel arch is alum in this era
im so glad and relieved i found your channel. ive been stressing about my 86 cutlass but you have helped A LOT. thanks.
Thanks for watching! Glad you found me too.
Helpful videos. I have been able to make several repairs and upgrades to my G bodies watching your videos
Awesome! Thank you!
Hey Brian I was trying to apply the big chrome on my drivers side door and I broke a couple clips. do you have any tips on how to apply it correctly? Or can you possible make a video showing how to do so? thank you so much
Looking for a link to the video on how to remove and install the new clips and replace the chrome. I'll double check my book as it might be in there as well, but videos are so much more informative sometimes as we get to see it done.
I don't have a video on removing and installing clips. I am sure you have it handled by now but the clips snap onto studs on the body.
Do you have video of how to remove and install the clips for the chrome and where can I buy some for my 1980 monte carlo?Thanks
i always grab those plastic "squid" clips when i see em in good shape at the junkyard
In search of a 86 cutlass supreme front passanger chrome piece, exactly like you showed.
Great how to Brian.
I have a 86 regal and want to put chrome rocker panels on the front fenders and the back. It has the original ones in the middle. Do you think the panels of a cutlass would fit the front fenders and the back of a regal???
All different.
Trailering them and wind hitting it in the front portion n breaks clips n flies off going down the road
GM 14005390 is the part number for the one on the doors. I found them for 13 bucks per 4 clips...my mc ls needs 7 or 8 per door...i think I found the ones for the front fender also.
I have a 87 Monte Carlo Ls and I need those same clips Where did you order the clips from?
Are the trim parts actually “chrome” plated or polished and clear coated? Can they be wet sanded and rouged/buffed?
*Polished stainless steel*
I don't know of you're still out there but, do you have any tips on how to fix the passenger vanity mirror lights??
Need to make sure you have power and the visor is grounded to the body. Its just a switch when you open the mirror and the switch might be bad.
keep them coming great video
How about a video about replacing rear speaker shelf
Remove the rear seat, upper interior panels and it comes out.
nice vid buddy one thing the chrome thats behide the door that have lil circle clips thats made out off metal they dont fall off like talking abt it just thought i sure that with you
MR_getinthere what do the clips behind the door look like and how many r needed for one side
will you please do a video of very descriptive timing chain video of sbc
Do u have a video putting the chrome back on
do not
can you do a video about getting rid of you ac and wirings completey
im rewiring an 85.monte carlo ss you have videos for re wiring g bodys
Brian, Thanks for this. My front piece is loose on my 1988 Cutlass Supreme Classic. Can you please provide more information on where to buy the plastic clips.
Can you show how to reattach chrome back on a cutlass on door buttom
Attached the new clips to the door and snap the chrome to the clips.
I wish I saw this video 2 years ago. Yep I'm missing chrome pieces one of them fell off when we went to Walmart and we picked it up on the way back. It's dented. I'm still missing 1 piece for sure
Glue them on.
i have an 84 monte carlo and i want to remove my chrome rockers is there a video on that? or is it just like this, you just slide them out? also with the clips are they screwed in or is it glue
Trying to install a rear lower window molding I replaced the clips 1985 Oldsmobile cutlass 442
hey Brian I was interested of purchasing those front fender chrome's, if you have them available how can I get in touch with you to buy this chromes...
They were sold a while back.
thanks Brian
Thank you for the video. I have looked everywhere and cannot find these plastic fastener clips. Any other suggestions on where to look? Thank you, David
They got em on ebay for 13 dollars per 4 clips....i needed them for my monte carlo ls. PN GM 14005390
Thank you!!
Bought some today!!
I have a 78 malibu g body and I wanted to know how to replace the turn signal switch. ...
Have to pull the steering wheel off and the turn signal guts out. I plan to do a video on that soon. Stay tuned!
Anyone have a link to where I can purchase these clips for a 1980 Cutlass?
Try your local fastener store.
I need that lower fender chrome!!😩
Sold
I'm looking for the chrome for the quarter window For a Monte Carlo LS or is the a way to make a temporary one
can u upload a video how to install window windshield molding clips
I am going to start doing short 1min how to vids on my Instagram page. Please follow @classicgbodygarage they simply slide over the nub in the window channel.
How do you remove the window chrome that is beside the side mirrors? On the 84 cutlass supreme 2 door.
Have to pull the door panel off and remove the bottom window stopper. The glass then drops below the molding to access the phillips screws.
What's the description under Ebay for these clips??
Cutlass fender trim clips
What year g body is this I have a 88 wonder if I have the same clips
88 Cutlass
Can I put a hurst header panel emblem on a 1983 calias ?
Do happen to have any trim for sale. I need the front pieces between the front bumper and tire and also the passenger side piece from between the door tire
I have the smaller passenger side piece between the tire and door, sold the front most fender piece on both sides. As mentioned in my video, first to get sold. email me olds7980@yahoo.com
thanks
Great now I know how to steal the chrome of gbodys!! Thanks great video!!!
Thieves suck.
Fuego
Do you have any of the front (wheel to bumper) chrome trim pieces in stock? Or the top of the fender chrome for driver side?
I sold both of those items off this car already. They are always the first chrome pieces to get sold off.
Classic G-Body Garage if you get any please let me know.
Hey Brian I wanted to purchase the front and back smaller chrome trims for the left side of my 82 cutlass. how can I reach you to do so?
The fronts were sold right after this video, I have the other pieces for the most part. Email olds7980@yahoo.com they are in driver condition, not mint condition.
How to put new clips on
How to contact you about parts?
Just FYI....these rocker pieces are actually stainless steel....not chrome
Yes I know that but the majority refers to these pieces as "chrome"
Bro i want those tail lights with the rocket emblem. Though i need the entire lenses with bezel assembly
Hey does the rocker panel trim off a regal fit onto a cutlass.
It does not.
Do you have a website listing parts you have for sale? I have an '87 Olds 442
I will at some point. for now please email me olds7980@yahoo.com
Where can I get some clips for my cutlass to hold the chrome on?
Stanley Thompson ebay Or Gbodyparts
What about the door panel it shake ever time I close the door 84 gp
Inner door panel? Clips are broken then.
Please Help!! I'm looking for the plastic clips for lower wide chrome mouldings for 79 Monte Carlo? Thanks
gbodyparts.com
how do you remove the clips?
They slide off the tabs
I need all the lower chrome for the entire car...
email me olds7980@yahoo.com
will do thanks
New subscriberr here...where can I buy the chrome wheel fendee
Thanks for subscribing! You can join Classic Gbody Garage on Facebook and ask within the group for your parts needs.
or let me know when you come across a set of this chromes
how much u want for all them bottom chrome trim
$200 plus shipping for the set. The two very front fender pieces have been sold but have the rest. email if interested olds7980@yahoo.com
Do you have an 88 for sale
Not right now
1st. comment & like.
strip that car to the bone.. like a chicken carcass.. selll everything and hoard the rest ... your barn can have things hanging from the rafters
I don't have that problem dum body shop glued it on
well thats one way to keep them on.
yea if it don't fall off he never sead he broke the clips on till after he glued it on if it falls of he sighed a paper he ads to paint the ohul car over and fix it right lol
How about no Chrome Chrome is thing of the past
A thing of the past for modern cars.
*It’s not chrome, it’s stainless steel*
Well this was a waste of time. Just check your car anyways right? Common sense?
Not common sense as most don't realize the chrome will just fall off...