Farm-house Table Design 2

I designed and built this custom dining room set. The table is hand-built and very sturdy. In this video, I'll build, paint and stain this table. Please check out the other related videos below. The items and tools that I used in the video can be found through the links below. Let me know your feedback in the comment section below. Send me an email to receive these plans.
If you would like the plans to this project, please visit my website www.engineeredwoodworking.com
If you are interested in buying any of my wooden crafts, check out my Etsy store:
www.etsy.com/shop/EngWoodworking
Other related videos:
[✓] Farmhouse Table Design 1 - • Farm-house Table Desig...
[✓] Matching Bench - • Farm-House Bench
[✓] Chair build - • International Concepts...
Try Amazon Prime Free for 30 days: goo.gl/z1SWKR
Items used in the video:
[✓] Unfinished Chair - amzn.to/2eJ9oFa
[✓] Gluebot Glue Applicator - amzn.to/2dEorTc
[✓] Dewalt Miter Saw - amzn.to/2eeyvAr
[✓] Skil Saw - amzn.to/2ewyMBU
[✓] Spax Structural Screws - amzn.to/2eYdlcZ
[✓] Prestain Wood Conditioner - amzn.to/2e2n6BT
[✓] Kona Stain - amzn.to/2eeyigD
[✓] Satin Polyurethane - amzn.to/2eeyoF1
[✓] Pencil holder - amzn.to/2emqE7z
[✓] Kreg Pocket Jig - amzn.to/2eIBJdq
[✓] Kreg Pocket hole table top - amzn.to/2e2pYP2
[✓] 2.5" Pocket Screws - amzn.to/2eIy4we
[✓] Kreg Pocket hole plugs - amzn.to/2emsKUT
[✓] Japanese flush cut saw - amzn.to/2eYescI

[@CoMmOdUss]

This is just the design i was looking for! Thanks for sharing this one!

[@billvirgie]

Awesome job Travis !

[@EngineeredWoodworkingandDIY]

Thank you for watching.

[@logandolph1232]

great video!

[@adrianvaldez4795]

Ok thank you

[@12345mike6789]

Nice
\

[@rickrenacci1717]

@Jim Here are some great woodworking plans if you're interested - WoodSun.xyz

[@matto.1074]

Nicely done! I like this and your epoxy table. Question... what did you do with the epoxy table? Keep it? Use it elsewhere? I am considering an epoxy finish on a bar top I am goin got make. Never done it before. Curious as to your experience with it.

[@mpurtilar]

Where can i find all of the dimensions? It only shows the 20" 4x4 riser. Thanks

[@projectpossible70]

The table looks great. Did you use kiln dried lumber? I didn't hear you mention it, people are going to see this video and think you can build with any construction lumber.

[@EngineeredWoodworkingandDIY]

Very good point. Yes, all the tables that I build are constructed from kiln-dried lumber.

[@jasonpower7154]

Question..did you seal the bottom or just the top and edges

[@EngineeredWoodworkingandDIY]

Jason Power I only applied polyurethane to the top and sides.

[@domeslacker]

Did you cut the edges (lengthwise) of the table top boards, or did you leave them with their original edges?

[@EngineeredWoodworkingandDIY]

The boards already have a rounded edge lengthwise, so no need to route that edge. I did not rip any of the top boards.

[@domeslacker]

Engineered Woodworking and DIY thank you for your quick response. I’m torn between wanting to rip them or leave this sort of eased edge it came with.

[@LudysRocks]

How did you do the white

[@EngineeredWoodworkingandDIY]

Ludys Torres it was Behr pure white enamel.

[@adrianvaldez4795]

where did you go the wood Home Depot doesn't have it the only have 2x4 the is dry and something else but they don't have thick legs and they're not dry their wet well this is the question of the day if you buy wet wood how long do I have to wait to use it can you even use it?

[@EngineeredWoodworkingandDIY]

Adrian, My Home Depot sells them.
www.homedepot.com/p/2-in-x-4-in-x-96-in-Premium-Kiln-Dried-Whitewood-Stud-161640/202091220
www.homedepot.com/p/4-in-x-4-in-x-8-ft-2-and-Better-Kiln-Dry-Doug-Fir-Lumber-16714/205329065

[@dec1designs247]

Nice build. Catchy music. What is the music title?

[@EngineeredWoodworkingandDIY]

The intro is Lucky Day. The main part is Lonely Nights both from RUclips Commons.

[@adamsizemore71]

Did you route all the cut edges?

[@EngineeredWoodworkingandDIY]

I believe so

[@brandonmag57]

What’s the height of the table?

[@richardthoming3418]

What is the name of the chair on Amazon?

[@adkinsmikkelsen4980]

I've found great handbook on woodprix website. Good solutions for everyone I think.

[@patrickcrist9586]

will you be sharing a pattern or dimensions?

[@jakespeakman6991]

Engineered Woodworking do u have the pattern or dimensions yet

[@projectpossible70]

Patrick Crist be careful if you are going to build a table from construction lumber it MUST be kiln dried, if you use green (wet) construction lumber your table especially the top will pretty much explode on you a few weeks or months after construction.

[@EngineeredWoodworkingandDIY]

This was built with Kiln-dried lumber

[@patrickcrist9586]

Travis I appreciate it, but I've actually already built a table but thanks anyway

[@noeltravis7731]

Engineered Woodworking and DIY Since you used a pocket hole jig how is it holding up. Hearing mixed reviews about them

[@pinosoto77]

I just paid for the plans through PayPal but didn't get them. Can I get some help with this situation?

[@EngineeredWoodworkingandDIY]

Ire-emailed them. Let me know if you don't receive them