Hey Guys The Weird Clunking noise your getting from your Suspension is your Sway bar end links, the stock ones can't handle the Drop.. You need aftermarket ones GodSpeed sells them for like $80-$90 bucks. The Clunking noise will stop, your stock end links the bushing's is where that weird sound is coming from its a 20 min Job really easy...!!!!!!! I have a 2019 Accord 2.0 Sport Same Color...........
Need to apply a thin layer of anti seize between the wheel spacers and brake rotor hubs or those two will bond together like glue making it hard to remove the spacers when trying to service the brake rotors. Looks good with the 25mm and 2in drop 👍🏾
What’s up bro. Question when you lowered it all you did was the lowering springs right. Didn’t have to add control arms or anything right. I took mine to a shop and they said if I lowered it I would have to get control arms and some other mess.
What up and no, I just added the lowering springs and the 25mm spacers. That’s honestly all you need, anything else would just be extra. I’ve had the car like this for over a month now and it’s been good
on the accord with a 2in drop or more youll need control arms unless you wanna buy tires like every 2-3 months because your only riding on lik 50%-60% of your tire not the whole tire
Accords need more love from the community, big is beautiful. But watch that turbo 2.0 and those gaskets. At least it isnt a 1.5 so you can go hard but anything after 9th gen Hondas have become Subaru levels of liability. That would be a wild DIY fix lol
@@badswagmasterx9863 He went 25mm all the way around. I feel 25mm on the front makes them poke out a little so I like the 20mm up front better. But if you go 20mm up front you have to trim the studs a little or they will hit on the back of the factory sport wheels. Don't have to trim the studs if you go 25mm.
@@borabora3055 I did the spacers and lowering springs at the same time so not sure which did more but the car definitely seems to corner much more level(less body roll). Not sure if that's the wider stance or the stiffer springs or both.
The car looks great! Perfect ride height for daily use. The accords down here in Florida are dragging frame 😭 I wouldn’t recommend for you to do that over there with them roads
KONIG Neoforms are enroute for me. Gives it a 7mm offset for my gloss black 22’ Hybid 2.0 Sport Accord. My OEM 19s looked good but got concrete rash. The Konigs are lighter, they increase acceleration and MPG..
So many of these videos never address this important part. I guess people are mostly doing this for the looks and not improving handling. I want to know what differences in cornering are they feeling and how flat is the car now in comparison to before the springs were changed.
@@marklatham1414 well yeah this was the installation video not the review on the springs. But I personally think the handling is a lot better just not as comfortable when driving due to the stiffness
I have seen a video from Honda mobile mechanic, said about some1 install 25mm spacers on the accord xgen , and thickness of spacer did not cleared the OEM studs, he is recommended 27mm or 30 mm spacer. Can you confirmed this please?
@@Naguaxity I live in NYC bro tell me about it . But It’s not that bad tbh I can still get over speed bumps , just have to angle leaving certain Parking lots 😭
Ohhh yeah so you already know lol. Did you have the same problem that it makes the crank noise on the springs too? Mine front right side makes a crank noise when I turn the wheel
@@bj10jgo we took quick look at it and we think it might be the rubber part in the spring. Hopefully this week we can actually take it off to check if we can fix it
@@rickcarrasco6716 coilovers you can adjust the height and springs you can’t. Springs are usually cheaper too, there are many differences tho depends on the brand
@@allanbui21 yeah so literally this week 2 weeks after the install, it started making a crank noise on the front right spring. I’m going to make a video on it to see how we can make it stop
Hey, so I need some advice. I have a 2018 Honda accord. I got some D2 Lowering springs. If I put 18 inch aftermarket rims, would it look low still or will there be a gap with the D2 Lowering springs. Or if I went with 20 inch rims will look low and good with the D2 springs or will they rub ? Or just stay with 19s? Any opinions any help from anybody thank you?
Tbh I’m not sure since I don’t have them myself however with the 19s that I have right now, the wheel to fender gap is really small. If you do 18s I think the car won’t look as low but it should still look good. But with the 20s, when you hit potholes it might rub the fender
Looks like you’ll need since spacers shown in the video. Also, adjust the camber so that your tires 🛞 won’t have uneven wear. I’m thinking of dropping it too but not myself. I’ll have a shop do this lol😅
@@Naguaxitynice Ive been thinking about installing these on my 17 accord coupe and i was wondering what ur long term review is, like the ride quality if u rub at all and things of that sort for daily driving
@@LionKing288 I do recommend it personally, still have them and I love the look and how it rides. The ride is just a little bouncier but I never had an issue rubbing at all. Also got the stock tires 235/40 R19
Hey Guys The Weird Clunking noise your getting from your Suspension is your Sway bar end links, the stock ones can't handle the Drop.. You need aftermarket ones GodSpeed sells them for like $80-$90 bucks. The Clunking noise will stop, your stock end links the bushing's is where that weird sound is coming from its a 20 min Job really easy...!!!!!!! I have a 2019 Accord 2.0 Sport Same Color...........
Good to know, did you do this and it stopped the noise?
Yes 🙌🏾 indeed… it’s a Easy job DIY Jack 2 Jack Stands…
@@joshuabeckham4100 perfect I might try that out then🙏🏼
Sorry bro I know am late do you have spacers on ?
@@premierlando6424 yes I have 25mm spacers
Solidified my decision on springs and spacers, 🤙🏼
Good to hear👍🏼🤝🏼
I just drop em in my Amazon cart😂
Need to apply a thin layer of anti seize between the wheel spacers and brake rotor hubs or those two will bond together like glue making it hard to remove the spacers when trying to service the brake rotors. Looks good with the 25mm and 2in drop 👍🏾
Thanks and will do🙏🏼
I like your video and your car! I'm done with high end luxury cars, think I'm omw back to Honda! Thank you, good video with a good mechanic and no bs.
Appreciate it fam
That man is a G, awesome job
That’s a fact, appreciate it🙏🏼
That's it! I'm lowering my 2021 2.0T 🔥
Great choice🔥
Awesome video. The car looks amazing. Did you keep the oem front endlinks or did you switch them out to aftermarket ones?
Thanks man, I kept the OEM end links but I heard the aftermarket help
What’s up bro. Question when you lowered it all you did was the lowering springs right. Didn’t have to add control arms or anything right. I took mine to a shop and they said if I lowered it I would have to get control arms and some other mess.
What up and no, I just added the lowering springs and the 25mm spacers. That’s honestly all you need, anything else would just be extra. I’ve had the car like this for over a month now and it’s been good
on the accord with a 2in drop or more youll need control arms unless you wanna buy tires like every 2-3 months because your only riding on lik 50%-60% of your tire not the whole tire
looks good man
Appreciate it
Love it! Way to represent!
Thank you🙏🏼
Perfect drop, bro!
Appreciate it fam🙏🏼
Fire set up... How low is low before the void your warranty?
Lmaooo I just did maintenance this week and I had no issues with it. They actually complement how good it looks lol👍🏼
Oh another question, with the spacer on. Does it eae your tires faster than norm?
Accords need more love from the community, big is beautiful. But watch that turbo 2.0 and those gaskets. At least it isnt a 1.5 so you can go hard but anything after 9th gen Hondas have become Subaru levels of liability. That would be a wild DIY fix lol
Appreciate it🙏🏼
Make sure u buy the rear camber mine ate the tires in less than 6 months
Damn, you had the same spacers too?
Looks good man! I have an 18 accord and went with a 1" drop with 20mm spacer up front and 25mm spacer in the rear. Love the oem look of these cars!
Appreciate it fam and yeah I love how it looks just by dropping it & adding spacers. It make it look so much better in my opinion
What spacers do you have on panda I want the same look you have
@@badswagmasterx9863 He went 25mm all the way around. I feel 25mm on the front makes them poke out a little so I like the 20mm up front better. But if you go 20mm up front you have to trim the studs a little or they will hit on the back of the factory sport wheels. Don't have to trim the studs if you go 25mm.
@@sirsmokin420hows the ride quality with spacers can you leave them on for x amount of miles and it would be ok or?
@@borabora3055 I did the spacers and lowering springs at the same time so not sure which did more but the car definitely seems to corner much more level(less body roll). Not sure if that's the wider stance or the stiffer springs or both.
The car looks great! Perfect ride height for daily use. The accords down here in Florida are dragging frame 😭 I wouldn’t recommend for you to do that over there with them roads
Excellent 🙌
Thank you🙏🏼
I’m definitely gonna be getting the D2 but are spacers necessary?
@@Tattedupjay3 spacers are not necessary but if you don’t get them, the wheels will be tucked inside the fender rather than having the flushed fitment
@@Naguaxityok sounds good. I will need to get 4 if I decided to go that route correct?
@@Tattedupjay3 yes you’ll have to get 4
Make a vid on fixing the clunk! Ive been wanting this spring but everyone has problems , i just want a clean oem look like this!
Got you, I’m literally getting ready to make the video right now so it should be up by next week
@@Naguaxityyou ever fix it?
@@c10bambino92 never got the chance to make the video. The noise went away after couple months
KONIG Neoforms are enroute for me. Gives it a 7mm offset for my gloss black 22’ Hybid 2.0 Sport Accord. My OEM 19s looked good but got concrete rash. The Konigs are lighter, they increase acceleration and MPG..
Where you get the vinyl wrap for the headlights??
Hey what’s up, I got the VViViD Bio Hex Headlight Smoke Micro Pattern on Amazon. I used the same thing on the reverse lights and rear reflectors too
@@Naguaxity FIRE ASFFFF BRO!!!
@@chapi1054 thanks fam🙏🏼🙏🏼
seen u had these on stock struts u still good in terms of wear and tear?
@@j35pharoah yes the only issue is the clunky noise it was making but that was about it
Have you done any performance mods… engine wise?
No I have not, wish I did😭
So, what's the ride like now? Is the handling more crisp? Did the comfort and cushioning take a hit?
The ride was always comfortable since the beginning, the only thing that changed was that it’s a lot more bouncier when hitting bumps
So many of these videos never address this important part. I guess people are mostly doing this for the looks and not improving handling. I want to know what differences in cornering are they feeling and how flat is the car now in comparison to before the springs were changed.
@@marklatham1414 well yeah this was the installation video not the review on the springs. But I personally think the handling is a lot better just not as comfortable when driving due to the stiffness
I gotta do this on my accord 😮
I would recommend it, it make the car look so much better
whats the link to your chrome delete in the front grill??
I got it on Amazon, it’s VViViD Gloss Black Vinyl Wrap Adhesive Film. Tell them I sent you lol
yo pa did this effect your warranty at all
Soon imma do mine like this
Do it, it makes such a huge difference on the look
I have the same spacers but the stock lug nuts broke on me, do you still have the stock lug nuts? And do you recommend other lug nuts?
Never had an issues with my stock lug nuts. Depending where you get your spacers, you can get their lug nuts as well
I have seen a video from Honda mobile mechanic, said about some1 install 25mm spacers on the accord xgen , and thickness of spacer did not cleared the OEM studs, he is recommended 27mm or 30 mm spacer. Can you confirmed this please?
The ones I got are the 25mm spacer from Titan Wheel accessories and I haven’t had any issues at all
25mm is perfect fit. I am not sure why the Honda Mech would say otherwise. I have 25mm on my car.
@@earlcruickshank9214 I agree, 25mm is perfect in my opinion
I was planning to lower mine, but i think best option for me is tein street basis coilovers. But this was a decent drop 🤙
Yeah the tein are good, I liked these cause of the affordable pricing and I like the 2in drop
Quick question? Has the snow affected you, I want to go with the same drop but I’m hesitant because of the snow here too??
Hey I dropped the car in the spring time so I haven't driving it in the snow yet. Hopefully is not too low, to the point that it affects me too much
Looks nice
Appreciate it
On the wheel spacer website for fitment it list Honda Accord 98-16 that's odd.
Do you have to lift the two front wheels to change it?
Yes you do, it not it’s hard to do
How did you blackout your headlights?
I used a vivvid overlay for it
Looks good brother!!!!! But if you bagged her just imagine!!!!
Thanks I appreciate it and yeah if I had the 💰I would mostly do it lol🙏🏼🤣
how did you get your mirror caps black?
They came light that with the black accent package that I got from the dealer. But can always do a vinyl wrap or get black covers for them
Any alignment issues and are they adjustable still?
No alignment issues at all and they are adjustable but not when it comes to the height drop
Halo buddy,, I got Accord 2018 ex-L 2.0 T,, this lowering spring good to go )?
They are for the price, just a little bouncy and has a clunky noise in the beginning
so.. what happen is when we dont cut those yellow rubber ?
got the same springs on my 21 accord . when it settles its so low lol. i scrape sometimes with my yofer lip
Yeah so I’ve had them for almost 3 weeks now and it’s super low now. I don’t think I’ll put a front lip because it’ll definitely scrape here in Jersey
@@Naguaxity I live in NYC bro tell me about it . But It’s not that bad tbh I can still get over speed bumps , just have to angle leaving certain Parking lots 😭
Ohhh yeah so you already know lol. Did you have the same problem that it makes the crank noise on the springs too? Mine front right side makes a crank noise when I turn the wheel
D2 has a good drop and super cheap but they are hella bouncy as hell and they will get all kinds of clunking sound later on.
Yeah right now, all I’m experiencing is the sound on the right front side but comfort wise is good
@@Naguaxity Yup, that is a known issues with D2 spring. DId your mechanic friend tell you it was the spring that was the cause?
@@bj10jgo we took quick look at it and we think it might be the rubber part in the spring. Hopefully this week we can actually take it off to check if we can fix it
What is the downside of springs vs coil overs ?
@@rickcarrasco6716 coilovers you can adjust the height and springs you can’t. Springs are usually cheaper too, there are many differences tho depends on the brand
Bro how did u go get alignment on the car
@@youngsavagedesautels8961 not in the beginning because I didn’t have an issue and the car was brand new but I would definitely recommend it
love it bro! hows the ride quality? planning on grabbing some as well
Thanks fam and the ride is really smooth & comfortable, which was what I was looking for. It’s very similar to the stock but lowered
@@Naguaxity thank you!
@@Naguaxity any noises? i heard some people say that
@@allanbui21 yeah so literally this week 2 weeks after the install, it started making a crank noise on the front right spring. I’m going to make a video on it to see how we can make it stop
@@Naguaxity Would love to hear more about this. Was thinking of ordering these springs, yet this is all I hear about.
If you wanted to get the car back raised, what would you have to do? I purchased a lowered 2018 honda accord
you would do the same steps in the video but with the stock springs or coilovers depending what your car is lowered with.
Hey, so I need some advice. I have a 2018 Honda accord. I got some D2 Lowering springs. If I put 18 inch aftermarket rims, would it look low still or will there be a gap with the D2 Lowering springs. Or if I went with 20 inch rims will look low and good with the D2 springs or will they rub ? Or just stay with 19s? Any opinions any help from anybody thank you?
Tbh I’m not sure since I don’t have them myself however with the 19s that I have right now, the wheel to fender gap is really small. If you do 18s I think the car won’t look as low but it should still look good. But with the 20s, when you hit potholes it might rub the fender
all depends on tire size... you go up on series on 18.. down on 20 to have same over all height
I have a 2022 Honda accord sport stock. All I need is D2 lowering springs to lower my car ? Nothing else just curious thank you
Looks like you’ll need since spacers shown in the video. Also, adjust the camber so that your tires 🛞 won’t have uneven wear. I’m thinking of dropping it too but not myself. I’ll have a shop do this lol😅
what percent tint do you have? Also on windshield
I have 20% all around and 35% on the windshield
Did you align the car king?
No I didn’t, never had an issue
My men how mush you pay for installation of the springs
Thankfully, my friend here is my pastor and he hooked it up for me for free .99🙏🏼🙌🏼
@@Naguaxity nice
You have any issues with rubbing the fenders?
Not at all, it’s been a month now and they have settle down even more but still no rubbing
what size are ur rims
They’re stock rims 19”
@@Naguaxitynice
Ive been thinking about installing these on my 17 accord coupe and i was wondering what ur long term review is, like the ride quality if u rub at all and things of that sort for daily driving
@@Naguaxitysorry also what size is ur tires, just wanna make sure i get the right sidewall so i dont rub
Thanks bro
@@LionKing288 I do recommend it personally, still have them and I love the look and how it rides. The ride is just a little bouncier but I never had an issue rubbing at all. Also got the stock tires 235/40 R19
What is yours rims name?
They’re the stock for the 10th gen accord sport
@@Naguaxity thanks bro
What tool is that u use to spread it lol
Is it verified that putting it on springs will effect the warranty?
I’m not sure yet, I’m hopping it doesn’t tho
Wish he was my mechanic
Yeah he’s honestly the best🙏🏼
🔥🔥🔥
Appreciate you my guy🤝🏼
Dude, I'm just gonna say one thing. That looks sexy af
Appreciate it fam🙏🏼🐼
Why
Pro tip...don't lower your car.
Lmaooo completely disagree, looks 100x better
@@Naguaxity No accounting for taste and disregard for the mechanics of a suspension.