This was informational and you're funny too....new to Silhouette Cameo 4....thanks! I'm an embroidery person mostly. Will be watching all your videos....NC girl.
if you warm your heat press briefly then lay your vinyl on it while you rub it & peel it helps release the stickiness. I will also use my stiletto tool to lift a small piece
Love it!! Yes, I'd wear it. Make a matching cap with the vinyl left over. Holy Heavens, you crack me up!! 😘 I was about to order my Cameo from another site. I scrapped that and ordering from your links. 😘😁
I was going to purchase that Sawgrass, but I started to read about some issues with the new software and printing issues. Hope your experience is better.
Easier method: Mirror your image prior to print (to print backwards) then weed extra material, place image on shirt with pattern on shirt place Teflon over do heat press then just remove plastic film.
Thank you Whit. I didn't know you could press that plastic film. Didn't dawn on me to try it. So in other words they just trying to sell us an extra transfer film that isnt really needed huh? isn't that something.
A-Dubb Productions Allan Wade your vinyl design side goes face down you do not need that clear transfer stuff I felt your pain though heat transfer vinyl already has a clear film, mirror your image then you actually peel access design off and weed, but I love that you do not take out you errors because some of us because of your videos will know what to do, thank you so much
Mayra rueda you have to use the transfer film with this material I’m using. The design is only on one side. Mirroring will not work. If i where to mirror it then press it into the shirt so that it can read properly that print would not be there. The other side of this material is blank. If probably wouldn’t even press.
When you get your GS500 you can print your own custom vinyl. I bought 2 of them one for printing on vinyl only and the other for doing sublimation only I am still waiting for them!. Oh, and they sent you that print because you are such a good weeder! Duh.
That beginning has me 😂 already. An easier way I would try, turn the image transfer side down, and pull up the carrier sheet. Haven’t used this type but that’s what I do with regular vinyl.
Does the grid on the screen in the program represent 12x12 or 24x24?? If I fill up my while screen, does it fill the whole 24x24 area, or would it just cut in the top left quadrant? (The 12x12)
I think It’s easier to peel the design when you flip it upside down and bend the vinyl paper up like curling it instead of pulling the transfer paper up
Siser it's pronounced seeser. Love this project. Keep em coming. Thanks Ps. If your transfer paper isn't working roll and peel from the back. That seems to help me.
You know more than me but I've always had good luck even with 1/4" letters by putting the transfer tape face down, the backing on top and pulling the backing off at a 180 degree pull.
YOu can use a credit card to squeegee if you don't have a professional tool available. Also, I usually put the image down on the table and peel the backing off. You are bending the image, if you bent the backing usually it will come off better. If the image starts to come up, you can use a finger to press it down while you continue to peel the back off.
Hi love your work and how you explain everything step by step. I wanted to buy a cameo 4 and was trying to go by your link on amazon but it’s showing currently unavailable is there any other link that is similar to this from where I can purchase on Amazon or other website
I really don’t know. What I do know is know where that I know of really had access stock of them. Everywhere that had them had like one maybe two. So. They are really scarce
To answer your question (minutes 19:28) To lift the image easier before you lay the transfer tape, take your weeding tool with the point and lift the edge on one side of the design to get it started this way when you pull the tape back after you use the squeegee the loose edge will cling and easily lift the rest of the image up all the way... Works well on larger cuts tiny images too but a little more time-consuming.
I made it. As soon as I get home I’ll put it on my website www.allanawade.com and you can get it. Thank you for watching and thank you for your support.
What's your advice or tip for a cameo that doesn't cut well? I'm new to the game but I've been resorting to vinyl since the cameo wouldn't cut anything well for htv papers, thanks
@@adubbproductions Bought the machine 6 months ago but I'll go with the settings, probably something I'm not doing right. Appreciate the help bro! More success to you and yours!
Hello, I'm a new subscriber. I'll be right here with you when you unbox your Sawgrass printer. I have one that's been sitting here for 3 weeks now. I ordered mines with Easy Subli ink. Do you think that I should've went with Subiljet ink? Anyway, I cant wait for your video on the Sawgrass printer.
Around the Sewing Table Im gonna Look into which Is preferable in my opinion then I’ll get back to you on that in a future video after I get the printer. We are gonna do a marathon on the sawgrass wait till I learn this thing. It’s gonna be epic.
Hi, new subscriber here! I am getting really close to purchasing the Cameo 4, I would love to get all of the accessories I need with the initial purchase. Do you have a list of all that you would buy - blades, adapters - all the things. I will definitely use your link, I will make the initial purchase from Amazon since I have the points there. Also from Philly, yo!
Good morning Jennifer Welcome to the channel and thanks so much for subscribing. I appreciate you joining the community. this is my list of pretty much everything you see me use in the videos. amzn.to/2OseY1o Don't ever hesitate to reach out. We are always here.
Look here now! You need to stop with the sound effects! I have a bad heart. Lol Have you ever used Infusible Ink Transfer Sheets? You will be totally amazed at the versatility. I could send you some to try. Let me know. Also, please make a Amazon wish list and share it with us. I like to send gifts. Cannot wait to get my t-shirt I won from you.
I love learning all the steps and finding out about heattransferwarehouse. I'm glad you explain about different idea patterns
This was informational and you're funny too....new to Silhouette Cameo 4....thanks! I'm an embroidery person mostly. Will be watching all your videos....NC girl.
"I dont even smoke weed..........All the time" I'm dying!!! 🤣
LOL......all the time...Shhhhh!
I just ordered mine , this vid made me more confident in my decision thanks man I appreciate you sharing your knowledge 💯 🙏 stay blessed
I’m new to the game watching u made me buy one
What setup do you have? I'm wanting to get into this
first time i see a man doing arts and crafts n stuff awesome
Adding ‘weed’ boxes helps to preserve your extra vinyl. I’m frugal with mine too! Great video.
Recycling regardless if one is frugal is good for the environment. We all should recycle and upcycle as much as possible.😎
Ayeee, we love that patterned vinyl!! Thanks for sharing!
You are welcome.
Just got my whole set up n um ready to go!! Thanks A Dubb for all the great content 💪🏽❤️
Your welcome. Thanks for watching.
if you warm your heat press briefly then lay your vinyl on it while you rub it & peel it helps release the stickiness. I will also use my stiletto tool to lift a small piece
Bro you have a great personality. You remind me of the Wayans brothers.
I’d definitely wear that. Cool video
Just got my Cameo 4.. This shirt is so fresh.. Thank you
🧐
Good Morning, CONGRATULATIONS 🎉🎉
Priscilla Thank you so much Priscilla. No breaks. Full speed ahead.
I love this video! I just got my Cameo 4 and Press... This video was great! I subscribed and I will be watching and listening! Thank you
Thanks for sharing your experience. Just bought my cameo silhouette 4 plus.
I wish I saw this before I bought one, I would have used your link!!! Mines comes tomorrow I'm so excited to start this new journey.
Amazing how to wash this I think I missed it On my to watch list. Good content keep it up
Love it!! Yes, I'd wear it. Make a matching cap with the vinyl left over. Holy Heavens, you crack me up!! 😘 I was about to order my Cameo from another site. I scrapped that and ordering from your links. 😘😁
Turn over and pull backing off instead. Do they sell vinyl to UK ? Thanks . Great video
Definitely will rock it! 💪🏾💯
Wow! Cameo link is best price on the net. Thanx
No problem. Thanks fro using the link. 🙏🏾 much appreciated.
Yes I will rock it
I was going to purchase that Sawgrass, but I started to read about some issues with the new software and printing issues. Hope your experience is better.
Fingers crossed. I’m about to find out in a few days.
all the time 😂 you're funny fam! just got my cameo 4 your videos are exactly what I needed to start!
That intro got me 😂😂😂
And all the info on shirts u da man 💯
Lol "after you weed the image."
Crystal Wiggins 😂😂😂😂🤣🤣🤣🤣
Easier method:
Mirror your image prior to print (to print backwards) then weed extra material, place image on shirt with pattern on shirt place Teflon over do heat press then just remove plastic film.
Thank you Whit. I didn't know you could press that plastic film. Didn't dawn on me to try it. So in other words they just trying to sell us an extra transfer film that isnt really needed huh? isn't that something.
@@adubbproductions Even Easier method: Lick it before you stick it
That works? I'm trying for the first time and forgot to grab adhesive vinyl🤦🏾♂️
A-Dubb Productions Allan Wade your vinyl design side goes face down you do not need that clear transfer stuff I felt your pain though heat transfer vinyl already has a clear film, mirror your image then you actually peel access design off and weed, but I love that you do not take out you errors because some of us because of your videos will know what to do, thank you so much
Mayra rueda you have to use the transfer film with this material I’m using. The design is only on one side. Mirroring will not work. If i where to mirror it then press it into the shirt so that it can read properly that print would not be there. The other side of this material is blank. If probably wouldn’t even press.
I knew it I knew me I didn't name it weeder hahahahhah love it glad I can still see your videos
Bought this Cameo about a week ago. Used your link 🙏🏾
🙏🏾 I appreciate that. Thank you. Thanks for watching.
You are so funny and I just love you!!!!
Thank you Brenda. I love you back.
Thank you for the information my G‼️
I liked, “what the sticky!!”
Yes love it ! need it now
Now that’s dope!. Highly appreciate the jewels and content you provide. Just used the link for the brick vinyl also. Tfs.
Very nice.
Thanks you. Thanks for watching.
Wow look 😀😀
I have found that if you peel the backing instead of the transfer tape, it comes off easier.
I will try that and see if it works for me. Thanks for the tip.
I love it, just got mine and I am so excited
When you get your GS500 you can print your own custom vinyl. I bought 2 of them one for printing on vinyl only and the other for doing sublimation only I am still waiting for them!. Oh, and they sent you that print because you are such a good weeder! Duh.
Great Energy, a Like and Subscribe just on that alone! Now I'm gonna dive deep into the content 🙂
Super cool intro!!
That beginning has me 😂 already. An easier way I would try, turn the image transfer side down, and pull up the carrier sheet. Haven’t used this type but that’s what I do with regular vinyl.
Yes. This. This method changed my life when I first heard about it.
Lol so catchy going to get one now big bro
Ayyyeee, get it. Thank for watching. 🙏🏾. I appreciate it.
Does the grid on the screen in the program represent 12x12 or 24x24??
If I fill up my while screen, does it fill the whole 24x24 area, or would it just cut in the top left quadrant? (The 12x12)
Nice job
🙏🏾
I think It’s easier to peel the design when you flip it upside down and bend the vinyl paper up like curling it instead of pulling the transfer paper up
LOOOL Love your personality!
🙏🏾 thank you. I’m glad you enjoyed.
Siser it's pronounced seeser. Love this project. Keep em coming. Thanks
Ps. If your transfer paper isn't working roll and peel from the back. That seems to help me.
That's dope....love it much...
Love your tutorials!!
Danielle Trevino Thank you. Love you in the Dubb Nation family.
You know more than me but I've always had good luck even with 1/4" letters by putting the transfer tape face down, the backing on top and pulling the backing off at a 180 degree pull.
Very nice
Thanks Peggy.
LOL!!! So adorable!
Thank you.
I like it!!!
Awesome!
Have you ever us e the cricket iron-on on the cameo 4 please make a video I’m going crazy trying to make my daughter shirts
No, I have never used cricket iron on.
A-Dubb Productions Allan Wade can u please
YOu can use a credit card to squeegee if you don't have a professional tool available. Also, I usually put the image down on the table and peel the backing off. You are bending the image, if you bent the backing usually it will come off better. If the image starts to come up, you can use a finger to press it down while you continue to peel the back off.
Hi love your work and how you explain everything step by step. I wanted to buy a cameo 4 and was trying to go by your link on amazon but it’s showing currently unavailable is there any other link that is similar to this from where I can purchase on Amazon or other website
This was really helpful thank you so much. I also have a question, where do u get ur shirts from? And did u need a resells permit to get them?.
Love it!!😁
What’s the biggest size you can cut on the cameo4 ? Because Cricut doesn’t allow designs bigger than 9.25 by 6.75 inches.
He’ll yeah that’s sick I like
Thank you
Love it bruh
Do you never used graphtec cutting machine ?
No. I don’t have one.
Question
Did they stop making the cameo +(plus)
Every place i look states out of stock but its been like that for months.
Thanks.
I really don’t know. What I do know is know where that I know of really had access stock of them. Everywhere that had them had like one maybe two. So. They are really scarce
@@adubbproductions thanks
To answer your question (minutes 19:28) To lift the image easier before you lay the transfer tape, take your weeding tool with the point and lift the edge on one side of the design to get it started this way when you pull the tape back after you use the squeegee the loose edge will cling and easily lift the rest of the image up all the way... Works well on larger cuts tiny images too but a little more time-consuming.
What is the website
I Pushed Subbed After you Said. "all the time"...
Thank you. I appreciate it.
Where can I get that transfer paper at please let me know
You should be able to find it on heattransferwarehouse.com
Can you do a tutorial on knockout designs
Does this transfer work with a regular iron, or do you need a press?
Not with the cannabis logo but definitely I would use your idea.
Do they ship to holland i like the shirt
Where do you get you blank shirts
When ordering that vinyl, does it come along with that transfer paper we need in order to press it ? Or is it a separate purchase ?
Try rubbing it on the back as well as the front and then placing it front side down and peeling the back of it from the actual transfer tape..
Where did u get the svg file I wanna buy the specialty vinyl and make this same shirt... they also have the vinyl in green omg.. I’m on it
I made it. As soon as I get home I’ll put it on my website www.allanawade.com and you can get it. Thank you for watching and thank you for your support.
That’s a dope shirt! So is the design👊. I would like to purchase it as well! Thanks for the tutorial. Subbed!
A-Dubb Productions Allan Wade what would I find it under
Here is the file. allanawade.com/collections/silhouette-cameo-files/products/silhouette-cameo-4-cannabis-design
A-Dubb Productions Allan Wade thank you braddah!! 🤙🏼
So it really don’t matter what color you make a logo in studios …. Cause it will not come out the color only the color the vinyl is correct ?
All the time👍🏽👍🏽👍🏽👍🏽
Love your excite too!
@16:51 “all that squeegeeing I did”… bro that’s some strong weed.
hahaha!! Love your opening comment
Lol. Thanks.
can i use this material as stickers?
'Ott'.. that got me
where did the cut file come from and is it a video of how to put in silhoette?
You can get the cut file from my website. allanawade.com/products/silhouette-cameo-4-cannabis-design?_pos=10&_sid=bb5410ce6&_ss=r
I cut out lv supreme pattern and it was horrible lol first time with cameo 4 but the cuts were crooked and it folded up jammed any advise ??
Yes I would
Thank u for being humorous.. LOL
What's your advice or tip for a cameo that doesn't cut well? I'm new to the game but I've been resorting to vinyl since the cameo wouldn't cut anything well for htv papers, thanks
Either buy a new blade or adjust your cut settings. Gotta be on of the two.
Here is a video I made on finding the right settings. ruclips.net/video/GPq1_olyl6Q/видео.html
@@adubbproductions Bought the machine 6 months ago but I'll go with the settings, probably something I'm not doing right. Appreciate the help bro! More success to you and yours!
@@adubbproductions Thanks much for doing that, much appreciated!
Hello, I'm a new subscriber. I'll be right here with you when you unbox your Sawgrass printer. I have one that's been sitting here for 3 weeks now. I ordered mines with Easy Subli ink. Do you think that I should've went with Subiljet ink? Anyway, I cant wait for your video on the Sawgrass printer.
Around the Sewing Table Im gonna Look into which Is preferable in my opinion then I’ll get back to you on that in a future video after I get the printer.
We are gonna do a marathon on the sawgrass wait till I learn this thing. It’s gonna be epic.
Please help me new to Cameo 4 and making shirts. I keep cutting through the heat transfer vinyl. What am I doing wrong?
Where can I get the shirts you use?
Hi, new subscriber here! I am getting really close to purchasing the Cameo 4, I would love to get all of the accessories I need with the initial purchase. Do you have a list of all that you would buy - blades, adapters - all the things. I will definitely use your link, I will make the initial purchase from Amazon since I have the points there. Also from Philly, yo!
Good morning Jennifer Welcome to the channel and thanks so much for subscribing. I appreciate you joining the community. this is my list of pretty much everything you see me use in the videos. amzn.to/2OseY1o Don't ever hesitate to reach out. We are always here.
@@adubbproductions - Thanks so much! Oh boy, a new dilemma - the regular Cameo 4 or the plus?!?!?!? I mean, while I am at it...
where did you get the cannabis Adidas image?
Look here now! You need to stop with the sound effects! I have a bad heart. Lol Have you ever used Infusible Ink Transfer Sheets? You will be totally amazed at the versatility. I could send you some to try. Let me know. Also, please make a Amazon wish list and share it with us. I like to send gifts. Cannot wait to get my t-shirt I won from you.
Alan what brand name t-shirts you wear ? i am looking for a company to buy from ?
😂😂😂the opening 😂😂😂
Or do u have a link for it or store u got from
What kind of transfer tape did you use.... as in the name of it?