@@TechReview2000 all the parts are on the vessel, there is physically nothing that i can do. i want my parts more than anything if there was a way to get the parts quicker i would do it
Get the traxxas catamaran. It probably does at least somewhere close to the claimed 100 edit: I just realized you already did. Also why did this comment get 6 likes???? Another edit: oh it claims 50mph I thought it was 100
Hey Kevin, this is probably my first comment on one of your videos, but I felt I could help shed some light on the speed of this kind of boat. This propulsion system is called an "Arneson Drive" It is almost half prop, half fan. It is designed to only be partially submerged while running, causing high-speed cavitation which acts almost like a jet. It looks like the boat is "chugging" while you drive it at the start. You might have the props down too far into the water. When going fast only the last inches of the boat hull are making contact with the water. Take a ruler and line it up with the prop and hold it flat against the hull. The prop should just barely be dipping into the path of the ruler. When properly trimmed this boat will make a 15-foot tall rooster tail, as it's designed that way. Cheers!
Sorry, these are NOT Arneson Drives. Arneson drives steer as well, no rudder, the whole drive units (shafts and props) move left to right to steer. This has a regular rudder with fixed drive shafts, if anything, this is a Fabio Buzzi Drive set up. And they are called Surface Piercing drives, as only about half the propeller is under water when running on plane, definitely has nothing to do with a fan, lol.
Nice video Kev. You may have watched my video of Zonda on here hitting 113mph and now up to 123.6mph all stock with only a prop swap on 6s. The Zonda will easily go over 100mph but it needs aftermarket props to hit this speed. Box stock on the raw stock props it does 55-60mph. Also you need to put floatation on the bottom of your hatch or you will lose it when it comes off in a high speed crash. Trust me it will come off LOL! Thanks for putting out all the great content. And if you want to get your boat to 100mph+ hit me up 😎
You need to make sure the drivelines are extremely smooth, no vibration or binding, balanced props, and you'll have to adjust the outdrives. Even just 1 degree of angle change will make a massive difference. Looks like it's running pretty wet out of the box for more stability. Getting 110 out of that boat is possible, but it's going to take a lot of patience.
Awesome 👌. On that old land rover, its old enough it should have a mesh adjustment on the steering block you could tighten up and remove that slop in the steering wheel 😀 I used to do it all the time on my old trucks 🚚
This boat looks absolutely epic!!!! You guys are absolutely crazy together!!! When Stenpy pulled out the arm floats 🤣🤣🤣🤣🤣🤣 and its a Boat Bouncer!!! awesome video again. Can’t wait for part 2!!! 👊👊👍👍
Just when I thought you could not get funnier or better. Bam get a boat get your mate Stemp and here you go the new funniest video on RUclips. Farts and all. Stemp is the friend we all need in our life funny as hell. Kevin thanks for the laugh. Because remember its only a toy.
Awesome video Kev. Please don’t forget to lubricate the shafts with marine grease every 1-2 runs. Its crucial to maintain the longevity of the rc boat. I really hope you read this comment. Thanks
Oh kiss that gopro and the gps goodbye the first time it flips/rolls. The learning curve for the 203mph project will seem easy in comparison to the learning curve on this boat, key thing to remember there's no brakes to slow it down......Looks nice boat though. Oh I'm at 9:14! Can't run a Cat over a wake that big!
Nah nah Kevin you have to get the Rockstar Caterham it is the fastest but it's nitro....it's so good and sable at top speed. Please 🙏🥺 get it it's worth it I promise.
Hello, what is the range on that boat? I fish from the beach, maybe I can hook my line to your boat and hope the boat can take the bait out offshore to about 1000 meters.
Either the endpoints (doubtful) or you need higher pitch propellers(deeper pitch propellers are a guaranteed easier way to go faster!). Also, you can go with a slightly larger propeller than the ones you have now or even more fins(example, looks like you have a 3 blade propeller-go with a deep 4 blade) larger here doesn't always mean better when it Comes to propeller size.. You need to remember heat from the motors. Larger size props = faster acceleration but not really higher speed. Good luck Kevin!
It's all above the drivetrain and the props. Your endpoints are perfect, more rpm and your Motors will blow up. Just screw your powertrims higher by about 1°, then try again- cause it's running wet out of the box, that causes more drag... Also, if your Motors and ESCs are not to hot, you could try bigger props, or with higher pitch. Easiest for you, cause you don't need to balance them, is to buy a couple of the TFL aluminium props, they are good and cheap for testing.
Hey kev. No expert but I know your not supposed to run outboards without water long. The poly water pump impeller spins very fast and can easily melt to the wall without lube/coolant
These TFL twin motor cats are amazing, I have been looking at them for a while, and I am going to get one for next summer. With the counter rotating motors/props, you get a very stable boat.
Great boat :) Always fun with you guys. Kev, one thing I've seen you doing over and over is cutting both battery cables at the one time. Unless you have plastic or nylon cutters you're making a dead short in the batteries, for a fraction of a second. That can't be good :/ Keep up the great work!!!
Yeah that’s what I was thinking they literally put themselves in more danger by wasting time blowing up all those Floaties and getting caught out in the storm then if they would’ve just went right out there immediately and made it back before the storm
Kev your boat videos are actually hilarious 🤣 both now have given me a cramp from laughing so hard. Stempy and yourself are so funny together keep it going pal 👍🏻great times
they’re not lying about dry running the outboard, it has a little plastic impeller in the bottom end that pumps water for cooling the engine and you will prematurely wear out the impeller after awhile and cause the motor to overheat.. but i dont think a short start is really much to worry about like you did in the video
Doesn’t matter what the esc are rated for. What’s the motor kv, and prop size, just because the esc can handle the voltage, the motor rpm and amp spikes can destroy the system. The amp spikes in boats are ridiculous.
Kev, you gotta try the proboat sonicwake! 6s power with self righting you can just run it balls to the wall "flat-out" non stop! It's an epic boat for sure!
Aqui no Brasil, a gente precisa deixar de comer bem as vezes pra comprar umas coisas melhorzinhas, pra usar pra se divertir, e lá fora os caras ainda compram zueiras pra zoar com os vídeos, 👏🏻👏🏻👏🏻👏🏻
I was expecting by the time you reach shore, sun would come out again....for 10 mins and then..RAIN AGAIN! AGHH! The wonderful British weather..............!
Let's hope you don't run in to that old fella who was having a go at you for running over the wild-flowers, that time and called the police. I can imagine his missus saying: Arthur, let the police deal with those awful people - we'll go for a nice, relaxing stroll along the river bank...... *youtube voice: THIS RC BOAT DOES 120MPH!!!!!!! LET'S GIVE HER A RIIIIIIP!!!! :-) :-) ;-)
The hull inside is a carbon-kevlar mesh. Its a combo of carbon fiber and kevlar in a mesh and then epoxy resin applied like regular FG or CF. Its supposed to give you the benefits of each materials using this
You had no GPS on it, How can you say it didn't go 100 mph? You can say that you "I should stick to RC Car's" because your to rough on the Softer of RC things, You need a little Therapy? A little Relaxation! ...... I want this Boat...it's Expensive! and I don't have the Time yet to relax to do this Boat! In the Future though!
Love your videos ❤️👍🏼😉 I always see something new in them , it’s amazing how you can make magic in them every time 👏🏻 .. many young men and old boys are jealous at you for living there dream life 🙏🏼 .. if it was possible? You could give that jet boat some down force wings , and make it the fastest sub jet boat in history of mankind 😉😁💪🏼
MRMAD2424 set the record of 110mph using super geico props from dasboata and fine tuning adjustment at getting the boat to plane over the water just right, give him a shout. Don't forget to clean n grease the flexi shafts. I Suggest you find a big lake for that speed mind 😄 Good luck, I split the Hull on my proboat miss geico 36 doing about 70mph when i flipped it on Sunday. Top entertainment boys but watch out of its way cos it will do damage if it hits you 😉
Hey, Kevin, you should purchase the Kronos XP V2 70 mph because it's fast and about and much like the Traxxas Maxx so it's not really dirt cheap but it'd be cool if you reviewed it and might even get it myself. BTW have subbed and liked the vid. also BTW get a Makita drill.
It CAN go over 100mph...but, NOT on the stock unsharpened & unbalanced props. To get it to reach its true "top speed" potential, you'll need a MATCHED pair of sharpened & balanced props. Check out the videos done by secretsquirrel, and you'll see.
Y luego cuando digo que haces parodia de benny hill y pones la musica de benny hill eres como benny hill un showman del rc no recomendable a destrozar los rc
Really enjoyed the video. Technically, I don't think it is 12S as that implies that the two 6S are in series. Given that they each drive a separate motor, if anything it is more like 6S2P.
You need to balance those props. I would run a octura x457 cut down to a 47 mm. I personally would run onward rotation on props . Then start playing with trim of drives. Air that thing out a little and you will gain speed. Hitting 100 plus on the water is no joke and not easy. I have a bunch of vids of real high end builds going over 100 mph if you want to check them out for ideas.
for 100mph you have to do a lot, first you need a new set of propellers some balanced and sharp then you have to find the perfect angle of both drivers a set of 2 batteries 6s up to 4000mah but with C as high as 100 recommended, at ESC is not need than time set at 7.5 ° degrees for the beginning, flexible axes if you could order them from OSE, they need to be replaced with some in one piece now they are in two pieces and it is good to grease them with Vaseline, then the more important is the center of gravity found and you can only play with the place of the batteries in the boat, there are many variables that influence the boat, it is difficult to reach 100mph those who did it unfortunately do not give much details, I wish you success
Shaft too tight, must good greased...prop too small. Try graupner carbon K series 👌 sharp and don't need balanced. Try lipo little backwards or forwards check cog. Forwards given your more stable and handling but can decrease speed backwards otherwise. Depends water conditions.... chopp or flat?!
Come on please monster truck?
parts were supposed to arrive this month, delayed again! what can i do?
@@KevinTalbotTV Where do you order parts? Maybe contact the seller?
@@KevinTalbotTV race that with the traxxas boat
@@TechReview2000 all the parts are on the vessel, there is physically nothing that i can do. i want my parts more than anything if there was a way to get the parts quicker i would do it
@@KevinTalbotTV Oh ok. Thats unfortunate. Good luck with getting your parts though
Kevin and Stemp together always have me crying with laughter.
Pure mayhem 🤣🙈
Same
4:16 the best
For what??? Why?
Comment you thatched it before you could test it not funny
That Honda outboard is air-cooled, so you can run it out of the water to your heart's content!
Not without wind you can't!
Blake Huffman it creates its own wind I'd imagine, with a cooling fan on the flywheel. Otherwise it'd definitely overheat with that cowling on it.
@@camyota Older ones didn’t have cooling fins, perhaps newer ones are different, not sure.
@@BlakeH97 yes u can
Thank you I was wondering
“Bounce it!” Funniest shisser I’ve ever seen
Kxhx
Get the traxxas catamaran. It probably does at least somewhere close to the claimed 100 edit: I just realized you already did. Also why did this comment get 6 likes???? Another edit: oh it claims 50mph I thought it was 100
Now it got 7
@@tysemilicia9548 haha thanks. I subbed to your channel!
Hey Kevin, this is probably my first comment on one of your videos, but I felt I could help shed some light on the speed of this kind of boat. This propulsion system is called an "Arneson Drive" It is almost half prop, half fan. It is designed to only be partially submerged while running, causing high-speed cavitation which acts almost like a jet. It looks like the boat is "chugging" while you drive it at the start. You might have the props down too far into the water. When going fast only the last inches of the boat hull are making contact with the water. Take a ruler and line it up with the prop and hold it flat against the hull. The prop should just barely be dipping into the path of the ruler. When properly trimmed this boat will make a 15-foot tall rooster tail, as it's designed that way. Cheers!
It's insane this comment has been here for 5 months with no reply. Spot on.
Thanks
Sorry, these are NOT Arneson Drives. Arneson drives steer as well, no rudder, the whole drive units (shafts and props) move left to right to steer. This has a regular rudder with fixed drive shafts, if anything, this is a Fabio Buzzi Drive set up. And they are called Surface Piercing drives, as only about half the propeller is under water when running on plane, definitely has nothing to do with a fan, lol.
Stinger drives
Just a straight up surface drive.
You guys are savages. Blowing everything up without an electric air pump
Haha you would have thought all the coin and gear Kev has he’s have a cordless air pump or at the worst one that hooks to car battery.
What...????
Kev: There's gonna be a link to all of that, down bellow.
Me: *check the out*
Also me: The best I can do is SUFFER.
So expensive..😔😭
Nice video Kev. You may have watched my video of Zonda on here hitting 113mph and now up to 123.6mph all stock with only a prop swap on 6s. The Zonda will easily go over 100mph but it needs aftermarket props to hit this speed. Box stock on the raw stock props it does 55-60mph. Also you need to put floatation on the bottom of your hatch or you will lose it when it comes off in a high speed crash. Trust me it will come off LOL! Thanks for putting out all the great content. And if you want to get your boat to 100mph+ hit me up 😎
True, most people think that fiberglass floats. Most plastics sink.
8:00 cause of dumborc reciever it has stability control/gyro.
You need to make sure the drivelines are extremely smooth, no vibration or binding, balanced props, and you'll have to adjust the outdrives. Even just 1 degree of angle change will make a massive difference. Looks like it's running pretty wet out of the box for more stability. Getting 110 out of that boat is possible, but it's going to take a lot of patience.
Chill my guy
@@noji1445 why would he need to chill? Kevin ASKED for input
this comment should be highlighted. Thank you for answering his question (and also mine, perhaps a question of many)
@@noji1445 Another infant feeling the need to express itself as irrelevant.
Wow you know a a lot about boats 😮😮
Kevin, have you ever thought of making a homemade rc boat?
It would probably explode 😂
MORE POWERRRRRR
I MADE ONE BUT ONLY DOES 88.51KPH
Awesome 👌. On that old land rover, its old enough it should have a mesh adjustment on the steering block you could tighten up and remove that slop in the steering wheel 😀 I used to do it all the time on my old trucks 🚚
Bump so kev may see it, his Life safety and the safety of other drivers is more priority than everything else
Great double act, the funniest video this year, I'm in stitches and Iv watched it 3 times😅🤣😂
Don't ever disrespect me looking like a cracked out mr .beast .
No throwing the remote in the water this time😂
Sup
Yah
wait don't tell me...a chinese company "stretched" the truth about how fast it can go? That's the FIRST time I ever encountered THAT sort of thing lol
This boat looks absolutely epic!!!! You guys are absolutely crazy together!!! When Stenpy pulled out the arm floats 🤣🤣🤣🤣🤣🤣 and its a Boat Bouncer!!! awesome video again. Can’t wait for part 2!!! 👊👊👍👍
You won't get anywhere near 100mph without the correct props, strut angle, and boat CG.
Hey Kev when are we gonna see the Traxxas X01 go 100mph against a ramp!
yes!
@@KevinTalbotTV That would be a really cool video
Just when I thought you could not get funnier or better. Bam get a boat get your mate Stemp and here you go the new funniest video on RUclips. Farts and all. Stemp is the friend we all need in our life funny as hell. Kevin thanks for the laugh. Because remember its only a toy.
Im not into boats but with you 2 involved i know its gunna be hilarious.
If you want a **real** RC boat that will actually do 100mph out of the box, I'd suggest looking at Oxidean Marine in California.
Nah
Awesome video Kev. Please don’t forget to lubricate the shafts with marine grease every 1-2 runs. Its crucial to maintain the longevity of the rc boat. I really hope you read this comment. Thanks
Did you actually give Kevin a tip on "longevity"? hahaha
Oh kiss that gopro and the gps goodbye the first time it flips/rolls. The learning curve for the 203mph project will seem easy in comparison to the learning curve on this boat, key thing to remember there's no brakes to slow it down......Looks nice boat though. Oh I'm at 9:14! Can't run a Cat over a wake that big!
Concrats with 1,11 Million Subs.
I love the health and safety 🤣🤣. When you and stemp are playing its always mayhem 👍🤣 great video!
You know that "s" stands for series. You only put the lipos in parallel. So its technically only 6s 2p
its embarrasing how nobody knows this
He does this every time. Im sure he knows and it's just for clicks
The boat adventures are becoming my favorite thing! love it!
6:14 had me laughing so hard LOL
Same
I love how you get brand new stuff to beat the crap out of, seriously you look like you're having a lot of fun.
I don't upstanding it my self I wouldn't want them testing shit for me
Kev love how your promoting the rc boat hobby! It is really fun! Especially when you get to race against your friends!
Nah nah Kevin you have to get the Rockstar Caterham it is the fastest but it's nitro....it's so good and sable at top speed. Please 🙏🥺 get it it's worth it I promise.
"Gotta have protection" - kev
yup, its important =p
Hello, what is the range on that boat? I fish from the beach, maybe I can hook my line to your boat and hope the boat can take the bait out offshore to about 1000 meters.
That safety gear was the best! 😘😘😘
Get some bigger props
Either the endpoints (doubtful) or you need higher pitch propellers(deeper pitch propellers are a guaranteed easier way to go faster!). Also, you can go with a slightly larger propeller than the ones you have now or even more fins(example, looks like you have a 3 blade propeller-go with a deep 4 blade) larger here doesn't always mean better when it Comes to propeller size.. You need to remember heat from the motors. Larger size props = faster acceleration but not really higher speed. Good luck Kevin!
ha ha ha🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣😂😂😂😂😂😂🤣🤣🤣🤣🤣😂😂🤣🤣🤣🤣🤣🤣😅
Stemp and Kev! Ying and Yang! Perfection!
Watching them run that poor Honda out of water even for that short bit hurt.
Oh hell ya I wanna see more of this boat! You guys really kill me😂😂😂thanks for the laughs!👍😂😁😎
This is why this channel is more than Rc stemp is a unique personality keepnup guys that's i s absolutely epic!!!!!!
"Guuuyys!!!" that signature intro's missing
Omg when he cut the esc wires I thought it was the battery wires both at the same time .I got fight o r flight butterflies
It's all above the drivetrain and the props. Your endpoints are perfect, more rpm and your Motors will blow up. Just screw your powertrims higher by about 1°, then try again- cause it's running wet out of the box, that causes more drag...
Also, if your Motors and ESCs are not to hot, you could try bigger props, or with higher pitch. Easiest for you, cause you don't need to balance them, is to buy a couple of the TFL aluminium props, they are good and cheap for testing.
Hey kev. No expert but I know your not supposed to run outboards without water long. The poly water pump impeller spins very fast and can easily melt to the wall without lube/coolant
These TFL twin motor cats are amazing, I have been looking at them for a while, and I am going to get one for next summer. With the counter rotating motors/props, you get a very stable boat.
You need prefect past it is like computer that can make you world fastest car go even faster
I was so happy to wake up and find a new video from you... then my first thought was "oh I hope Stemp is involved"..... Kev you did not disappoint!
Oh Just noticed the Worlds fastest RC boat was clocked at 206mph in June 2020, another record for Kev to aim for? THoughts Kev?
Great boat :) Always fun with you guys. Kev, one thing I've seen you doing over and over is cutting both battery cables at the one time. Unless you have plastic or nylon cutters you're making a dead short in the batteries, for a fraction of a second. That can't be good :/ Keep up the great work!!!
That was the esc wires, you would have known if he cut both wires on a 6s 6000, there would have been fire.
Your every video excellent 😍😍😍💓💓🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
I love how you took the piss out of the health and safety plus you ended up in a storm on the way back aswell 😂
Yeah that’s what I was thinking they literally put themselves in more danger by wasting time blowing up all those Floaties and getting caught out in the storm then if they would’ve just went right out there immediately and made it back before the storm
More power! 2x 180 A seaking and RC boatbitz bigger props !!
Kev your boat videos are actually hilarious 🤣 both now have given me a cramp from laughing so hard. Stempy and yourself are so funny together keep it going pal 👍🏻great times
Your goin to need much bigger motors and esc combo to get even close to 110mhp 🤣
Definitely passed the durability test lol 😂 you guys gave it a proper flogging. Nice boat for sure.
You blokes are a bloody riot . Awesome show ! I wanna try 6S in my Zelos 36. But I can't afford it 😆
You two are nutters on the boats - loved it. Should be getting our boat in a week 👍
Just wondering did you pick up all the inflatables so as not to litter
I love how you get brand new stuff to beat the crap out of, seriously you look like you're having a lot of fun.
Kevin you need to make it a land and water boat so put wheels and a motor on it
Thank you. I haven't laughed like that in a while... lol Awesome stuff!
Get a red car please I think you will like them and they are dirt cheap!
When you're using the RC boat has a push that was funny...
Get new king pins on that there landy!! Or get that grease gun on them!! But when mine went that bad! I was told better to get new ones!! 👍🏻
Can you please get the red cat racing 1/5 scale crawler please
Anyone know the song? Just went and bought the same boat and got it to run 105🏁😎
they’re not lying about dry running the outboard, it has a little plastic impeller in the bottom end that pumps water for cooling the engine and you will prematurely wear out the impeller after awhile and cause the motor to overheat.. but i dont think a short start is really much to worry about like you did in the video
Should hav brought an evinrude e-tec 10 hp outboard eh
hi my name is Ryan and travin we like you rc we love you
If you look at the propellers you only have 2. If you had 3 it would go alot quicker!
You should invite Mr. Bean as a surprise guest Kev. That in fact would be Absolutely Epic! 😎
Doesn’t matter what the esc are rated for. What’s the motor kv, and prop size, just because the esc can handle the voltage, the motor rpm and amp spikes can destroy the system. The amp spikes in boats are ridiculous.
Kev, you gotta try the proboat sonicwake! 6s power with self righting you can just run it balls to the wall "flat-out" non stop! It's an epic boat for sure!
You guys had fun! That's what the hobby is about.
I think I have got the same dinghy as you lol :)
I talked to a guy that races nitro boats RL scale. A lot of it has to do with the prop. Can probably buy better ones, those are small and basic.
7:02 This part makes me laugh because the boat is under water and that muffles the sound of the motors, and the sound of the water is funny too 😂😂
Kevin was stronger as he carrys a lot of rc babies
In which site can we buy the rc cars pls help guys??
Gràcies per el vídeo!!!
Salutacions des de Mallorca Bros!!!
Alobiuu Willy Boom!!!
That was hilarious. An absolute hoot well done boys. Well done indeed!
Funny, but..., this thing could have been KILLED both of you! No Risk, No Fun, you thought...
Aqui no Brasil, a gente precisa deixar de comer bem as vezes pra comprar umas coisas melhorzinhas, pra usar pra se divertir, e lá fora os caras ainda compram zueiras pra zoar com os vídeos, 👏🏻👏🏻👏🏻👏🏻
I was expecting by the time you reach shore, sun would come out again....for 10 mins and then..RAIN AGAIN! AGHH! The wonderful British weather..............!
Let's hope you don't run in to that old fella who was having a go at you for running over the wild-flowers, that time and called the police.
I can imagine his missus saying: Arthur, let the police deal with those awful people - we'll go for a nice, relaxing stroll along the river bank......
*youtube voice: THIS RC BOAT DOES 120MPH!!!!!!! LET'S GIVE HER A RIIIIIIP!!!! :-) :-) ;-)
The hull inside is a carbon-kevlar mesh. Its a combo of carbon fiber and kevlar in a mesh and then epoxy resin applied like regular FG or CF. Its supposed to give you the benefits of each materials using this
You had no GPS on it, How can you say it didn't go 100 mph? You can say that you "I should stick to RC Car's" because your to rough on the Softer of RC things, You need a little Therapy? A little Relaxation! ...... I want this Boat...it's Expensive! and I don't have the Time yet to relax to do this Boat! In the Future though!
Love your videos ❤️👍🏼😉 I always see something new in them , it’s amazing how you can make magic in them every time 👏🏻 .. many young men and old boys are jealous at you for living there dream life 🙏🏼 .. if it was possible? You could give that jet boat some down force wings , and make it the fastest sub jet boat in history of mankind 😉😁💪🏼
MRMAD2424 set the record of 110mph using super geico props from dasboata and fine tuning adjustment at getting the boat to plane over the water just right, give him a shout. Don't forget to clean n grease the flexi shafts. I Suggest you find a big lake for that speed mind 😄 Good luck, I split the Hull on my proboat miss geico 36 doing about 70mph when i flipped it on Sunday. Top entertainment boys but watch out of its way cos it will do damage if it hits you 😉
Hey, Kevin, you should purchase the Kronos XP V2 70 mph because it's fast and about and much like the Traxxas Maxx so it's not really dirt cheap but it'd be cool if you reviewed it and might even get it myself.
BTW have subbed and liked the vid.
also BTW get a Makita drill.
It CAN go over 100mph...but, NOT on the stock unsharpened & unbalanced props. To get it to reach its true "top speed" potential, you'll need a MATCHED pair of sharpened & balanced props. Check out the videos done by secretsquirrel, and you'll see.
The camera guy of the building behind must be cracking of seeing this guys 🤣🤣
Y luego cuando digo que haces parodia de benny hill y pones la musica de benny hill eres como benny hill un showman del rc no recomendable a destrozar los rc
Really enjoyed the video. Technically, I don't think it is 12S as that implies that the two 6S are in series. Given that they each drive a separate motor, if anything it is more like 6S2P.
You need to balance those props. I would run a octura x457 cut down to a 47 mm. I personally would run onward rotation on props . Then start playing with trim of drives. Air that thing out a little and you will gain speed. Hitting 100 plus on the water is no joke and not easy. I have a bunch of vids of real high end builds going over 100 mph if you want to check them out for ideas.
for 100mph you have to do a lot, first you need a new set of propellers some balanced and sharp then you have to find the perfect angle of both drivers a set of 2 batteries 6s up to 4000mah but with C as high as 100 recommended, at ESC is not need than time set at 7.5 ° degrees for the beginning, flexible axes if you could order them from OSE, they need to be replaced with some in one piece now they are in two pieces and it is good to grease them with Vaseline, then the more important is the center of gravity found and you can only play with the place of the batteries in the boat, there are many variables that influence the boat, it is difficult to reach 100mph those who did it unfortunately do not give much details, I wish you success
Shaft too tight, must good greased...prop too small. Try graupner carbon K series 👌 sharp and don't need balanced. Try lipo little backwards or forwards check cog. Forwards given your more stable and handling but can decrease speed backwards otherwise. Depends water conditions.... chopp or flat?!