I finally we head first into this project, and it worked really well, thanks for the video, took me about 4 hours, but your video guided through the process very well, thanks again
Just replaced my coil! all this stuff is un neccessary. just remove the muffler and that bracket. remove the plastic cover with phillips screwdriver (short) then the housing bolts. lean the cover back and reach into the cover to remove the 2 coil screws. no need to remove the cocer, just pull it back a little. did not need swivel to remove the bottom cover bolts. just use a socket and lean it a little.
I need someones help please. What does the other end of the black/white wire from the ignition coil hook too. A kill switch was installed on my cart long ago and wire broke loose. Have no idea where it goes. Please help. 1998 club car ds. Kawasaki fe290
What mine is doing it will run fine until the engine warms up and then it will start cutting out sometimes it will die you can let it sit a cool down for a minute and I will start up and run fine until it gets warm again
I finally we head first into this project, and it worked really well, thanks for the video, took me about 4 hours, but your video guided through the process very well, thanks again
I just changed my coil. Didnt need to drill out hole bigger in bracket area. I used a swivel socket Was easier than i thought. Thanks for video
Just replaced my coil! all this stuff is un neccessary. just remove the muffler and that bracket. remove the plastic cover with phillips screwdriver (short) then the housing bolts. lean the cover back and reach into the cover to remove the 2 coil screws. no need to remove the cocer, just pull it back a little. did not need swivel to remove the bottom cover bolts. just use a socket and lean it a little.
Very helpful video. Thanks!
R u going to replace the coil
i replaced the coil, yet but it gets hot it still dies like turning off a switch. what else could it be??
Rev limiter
Matt did you ever find your issue?
Just did this today. Ty for the video, did your new coil work?
Going on a year and still working fine. thanks for watching!
I need someones help please. What does the other end of the black/white wire from the ignition coil hook too. A kill switch was installed on my cart long ago and wire broke loose. Have no idea where it goes. Please help. 1998 club car ds. Kawasaki fe290
Thank u for this video. Ive paid to have 2 coils replaced. Its very expensive. I can for sure do this now when it needs it. Thx.
Pm. Me
I did remove the muffler bracket. Btw. Thank you
What mine is doing it will run fine until the engine warms up and then it will start cutting out sometimes it will die you can let it sit a cool down for a minute and I will start up and run fine until it gets warm again
did not show the bolt through the cover on the back 3 o'clock position ...nothing a stick of dynamite won't cure.
What a PIA!!
I took the engine out to get it