The problem with these coating systems is that they show the application but not the results after 2 or 3 years. Some products fail miserably from weather elements over time. I am not saying this product is bad or anything but it would be nice to see examples over time.
What does he mean by Prepared surface? Primed, sand blasted? Normal Epoxies are not UV resistant. Is this a special blend? Most all roof coaters use Elastomerics or Acrylics, which are UV resistant.
great but I can't walk on my cement tiles. 4 meters of non reachable that I must get tot he edges by ladder. Need an air gun with 3/4 to 1" tube x 3-4 meters long to do the same by slurry or spray. Any ideas or materials out there ?
Tcar I have commercial roofs just like this one. Anyone who walks on a roof like this should know that you don't step on the high ridges. They will buckle and and wrinkle and leave a weak spot in the panel. They should know better. I always tell someone who is going to go on my roofs to check air conditioners, or clean vents, to stay in the valleys of the roof. '' STAY OFF RIDGES''.
What type and model are you using to spray the Epoxy? Would also be good for "paints and sealers? Send me specs of epoxi, cost and other ways to apply the product, if you would. Tks for the video! Where is your company located and ph, to contact you. Happy 2016
How is this better than other coatings on metal roofs? like elastomeric? How do you prep a roof? I am leaning toward the Topps system at about $2/SF, the RUclips video was more helpful by explaining the details.
Walking the full length of the sheet metal while spraying would be much fast and leave less minimal spray mark from the pull and release method of the sprayer. Also these guys should be tied off even know the incline of the roof is minimal.
I can die a happy man, i finally saw an hour long vid of guy spraying, no talking, just spraying so we can see his amazing technique!
dears, which the tip ideal for the application? how many gallons per minute the airless machine should have?
The problem with these coating systems is that they show the application but not the results after 2 or 3 years. Some products fail miserably from weather elements over time. I am not saying this product is bad or anything but it would be nice to see examples over time.
Could u recommend a budget friendly roof sprayer
What does he mean by Prepared surface? Primed, sand blasted? Normal Epoxies are not UV resistant. Is this a special blend? Most all roof coaters use Elastomerics or Acrylics, which are UV resistant.
Spraying near rake trim ? overspray lawsuit, is it possible to apply at a little lower pressure decrease overspray?
so... in northern zones like here in Michigan, Do you get more Ice build-up on light roofs?
Which machine are u guys using
great but I can't walk on my cement tiles. 4 meters of non reachable that I must get tot he edges by ladder. Need an air gun with 3/4 to 1" tube x 3-4 meters long to do the same by slurry or spray. Any ideas or materials out there ?
Tcar
I have commercial roofs just like this one. Anyone who walks on a roof like this should know that you don't step on the high ridges. They will buckle and and wrinkle and leave a weak spot in the panel. They should know better. I always tell someone who is going to go on my roofs to check air conditioners, or clean vents, to stay in the valleys of the roof. '' STAY OFF RIDGES''.
What did it cost plus equipment?
GOOD STUFF RHINO ROOF PROTECTION SYSTEMS INC. SOUTH FLORIDA
need you to wash the roof before or not?
y'all don't have anything like that in east Texas??
What type and model are you using to spray the Epoxy? Would also be good for "paints and sealers? Send me specs of epoxi, cost and other ways to apply the product, if you would. Tks for the video!
Where is your company located and ph, to contact you. Happy 2016
Any social media page
Looks like it needs another coat, if it matters?
How is this better than other coatings on metal roofs? like elastomeric? How do you prep a roof? I am leaning toward the Topps system at about $2/SF, the RUclips video was more helpful by explaining the details.
how many sq ft can you apply in a day?
how much do you pay the guy in red? I want his job!
Matt Short. his job is HOSE MAMA.
Walking the full length of the sheet metal while spraying would be much fast and leave less minimal spray mark from the pull and release method of the sprayer. Also these guys should be tied off even know the incline of the roof is minimal.
needs another coat.
Must be Done on a NO WIND DAY as your Neighbors will have it on their House and Cars, Epoxy Paint is a Great Sealer.......
Where is your mask?
Roof Cleaning by A&E epoxy lung in 10 years!
any one who can help me to get a complete set of roof painting/spraying machine email mdota2002.tm@gmail.com
Roof Cleaning by A&E
Read the description --
NRG™ is a high performance, 100% solids, 0 VOC
0 VOC means NO MASK NEEDED
Make sure the cars/machinery isn't in the path of any over spray that can speckle windshields or damage auto paint 🤬
Wooahhh dude spraying all that chemical without a mask 🤔
Read the description --
NRG™ is a high performance, 100% solids, 0 VOC
0 VOC means NO MASK NEEDED
Jmmmm Next time use a mask an a harnes
Don't mess with your health and try to keep safe! Using safety equipment.
Dx
that's a pretty bad spraying !
Safety first because denger this camicals so I hope work primess helmet 'gogle 's hand goles safty su mask is very very important working area.