My friend Mike helped me with the installation of the rear fender LED light. In my opinion it looks excellent and functions great. What modifications have you made to your bike that made the look POP? Let me know and share with the rest of us. Let's Ride!
Thanks for posting this tutorial! I was going to hardwire my lights in. I didn't even think about cutting the wire connection from the stock lights plug and splicing the wires to there. Can't wait to install my DK Customs stealth light bar and Kellerman Atto turn signals.
Nice video but does the fender light blink when the left indicator blinks. The way it's wired it should but I couldn't tell for sure from the test in the video.
Way to go. However, I have to thank my buddy Mike. I refer all my electrical work to him. I'm good mechanically. Thanks for watching and stay in the wind.
How did you guys get the brake light and running late to work together? When I hook my up one cancels out the other my brake light works but running late does not.
I have a question how wide is is it? Im thinking about choping the fender on my older sportster and im looking for a light that will fit under the fender.
Hi I have a iron 2015 with tail light.. Before the female connector I have 4 wire but after the male connector only 2.. Im very confused because they not look like you video.. Do you think I need to use the center wire Go to the tail ligth?
I don't know your wiring diagram. Identify which wire works which light by using a multimeter. Then attach the fender light wires according to the diagram in the video time stamp at 2:48. Also, check the diagram on this link. Hope it helps. Anki HappiGo ANKIA Motorcycle Chopped Rear Fender Edge LED Brake License Plate Tail Light Stop Running Light Turn Signal Lamp for Harley Sportster XL883N 1200N XL1200V XL1200X (Black) a.co/d/1nmvdMd
My friend Mike helped me with the installation of the rear fender LED light. In my opinion it looks excellent and functions great. What modifications have you made to your bike that made the look POP? Let me know and share with the rest of us. Let's Ride!
Sandman, I enjoyed helping you out with the light install.
You are the Man!
Thanks for posting this tutorial! I was going to hardwire my lights in. I didn't even think about cutting the wire connection from the stock lights plug and splicing the wires to there. Can't wait to install my DK Customs stealth light bar and Kellerman Atto turn signals.
Glad I could help!
Nice video but does the fender light blink when the left indicator blinks. The way it's wired it should but I couldn't tell for sure from the test in the video.
sir u have put together the best video so far i have seen out here, thanks so much...
Wow, thanks. I appreciate the support.
Your video is the best on line. Was able to do my own work thanks to you.
Way to go. However, I have to thank my buddy Mike. I refer all my electrical work to him. I'm good mechanically. Thanks for watching and stay in the wind.
How did you guys get the brake light and running late to work together? When I hook my up one cancels out the other my brake light works but running late does not.
Also, I had to watch the video a couple times to see, did you guys run the turn signals?
Thanks again for awesome videos! Sandman Rides 🍻
I appreciate your support. Thanks for watching.
Did you try de-pinning the original pigtail and then re-using it on the new brake light? Wasn't sure if it was possible.
We did not try depinning the pigtail. It is possible as I've seen it done but we decided to slice and dice. Thanks for watching.
Nice job
Thanks!
Great video
I appreciate the compliment. Thanks for watching.
Why is it when you turn on the left side both of the tail gate light and left turn lights on? But, the right only by itself?
I have a question how wide is is it? Im thinking about choping the fender on my older sportster and im looking for a light that will fit under the fender.
a.co/d/dHTLaSI
Mine measures 7" wide. It fits perfectly under the fender for stock 2022 HD Sportster Iron 883. Good luck.
Hi
I have a iron 2015 with tail light..
Before the female connector I have 4 wire but after the male connector only 2..
Im very confused because they not look like you video..
Do you think I need to use the center wire Go to the tail ligth?
I don't know your wiring diagram. Identify which wire works which light by using a multimeter. Then attach the fender light wires according to the diagram in the video time stamp at 2:48. Also, check the diagram on this link. Hope it helps.
Anki HappiGo ANKIA Motorcycle Chopped Rear Fender Edge LED Brake License Plate Tail Light Stop Running Light Turn Signal Lamp for Harley Sportster XL883N 1200N XL1200V XL1200X (Black) a.co/d/1nmvdMd
Any issues with the light coming off while riding and hitting bumps using the gorilla tape
None whatsoever. The double-sided tape I used is just like 3M tape. We'll see over time. Thanks for watching.
Hows that holding the gorilla tape? I used gorilla epoxy adhesive doesn’t went well came off after riding few miles
It's holding up really well. I've had the bike out in the rain and scorching heat. No problems yet.
I’m so confused what connecter goes where?
Anki HappiGo ANKIA Motorcycle Chopped Rear Fender Edge LED Brake License Plate Tail Light Stop Running Light Turn Signal Lamp for Harley Sportster XL883N 1200N XL1200V XL1200X (Black) a.co/d/bwh0l2L
The link I sent you has the wires and where they go. I hope this helps.
About to do it on my bike but I'm doing it to delete the original tail lights.
That sounds awesome. It dramatically improves the look. I added the Magic Strobe and it lights it up.
Your new light flashes with your left side blinker because the blinkers and brake lights share a wire.
Thanks for watching.
Should've taken the brake light wire n tied it to the blue n red striped wire b4 the harness plug ....then the brake light will work the way it should
@@kevinlawrence2935 I’m trying to install this light now. Are you saying hook it up to the wire b4 the plastic clip to the left turn signal?
I SAW THE AA ON YOUR WALL, WERE YOU AIRBORNE?
Yes sir. 13 years in Ft. Bragg but 16+ years on Airborne status. Thanks for watching.
So what color wire goes to what?
white - left turn signal, blue - right turn signal, yellow - running lamp, red - brake lamp, black - ground. Thanks for watching.
Hi @sandmanrides4318 my light I bought only has: blue, yellow, orange, red, and black. No white wire. Is that an issue
You should disconnect the two shocks…get more room to work
I suggested that but Mike was doing the work and he felt comfortable with them on. Thanks for watching.