TCMT Forward Controls: Install and Review
HTML-код
- Опубликовано: 20 окт 2023
- This Week on Weekend Adventure Rides I install TCMT Forward Controls on a 2006 Harley Sportster 883R. Comparison to stock Harley controls and what you get for the money.
________________________________________________________________
** Amazon Affiliate Links**
TCMT Forward Controls: amzn.to/3s04k9E
**Unaffiliated Links**
Harley Forward Controls: tinyurl.com/5vCaleb?
#harley #harleydavidson #motorcycle #adventure #sportster 
Авто/Мото
![Cordae - Saturday Mornings (feat. Lil Wayne) [Official Music Video]](http://i.ytimg.com/vi/z2GYJua09F0/mqdefault.jpg)
I did a Hybrid of this. I bought the TCMT. Any part in the kit that did not meet muster I placed aside and ordered the HD Part on Ebay. Once I got my parts to satisfaction I changed my Mids out and installed the Forward Controls. I then sold all the parts individually on Ebay and made my money back for the entire cost of changing them out. The Foot Rest Mounts seemed to be the weakest and like Pot Metal so they had to go. Certain bolts did not pass muster as well. I also went with an After Market Shift Rod that was superior to both TCMT and HD OEM. After Market Heel Toe Shifter and Brake Pedal was exchanged for TCMT or HD OEM versions. It was nice I broke even as the parts are in demand on Ebay.
I've been in a weird place for a while on forwards. I've wanted them but couldn't see paying the "Harley fee" for oem co tools, but also have been burned by the Amazon knock-offs in the past. This video was perfect and I did as you suggested, through a combination of recycling the hardware from the mids and bought some bits at the hardware store. Drenched in loctite and torqued gingerly.
Thank you very much for your objective assessment. As for the hardware problem you mentioned, we will record it and give feedback to the factory.
@tcmt I'd be interested in reviewing more of your products.
Make these out of steel! Too flimsy for me thx
@@WeekendAdventureRidesI’m about to order because of this review 🫡
Just an fyi, the link needs an update.
Going to install same stuff in Saturday, thanks for tutorial, friend!
thanks so much! this it was very helpful and well done!
great video bro
i got this same set on mine and honestly it does good just make sure to check the bolts that come with the kit regularly cause they love to come loose even with loctite i had one fall off on my shift linkage while riding lost the ability to shift and replaced the main bolts for shifting with some lowes specials and havent had a issue since
Thanks for the insight!
As for the flex considering they are forward controls, they shouldn’t be taking that much weight other than resting your feet on them. They might bend or snap if you drop the bike but if you’re worried about that you’ll probably have a crash guard already installed.
No crash guard, gonna run them and see how it goes.
I have a similar chinese knockoff forward controls, they flex but so far they haven't broke yet, i have let fall the bike a couple times but they are still there, I'm gonna change them into the original oem brackets and footpegs brackets because I'm a scary little cat XD they did their job but it's time to go.
Thanks for the video. How are they holding up till now?
It's still in pieces in my shop. Eventually it will be done
Man if you're showing an installation video it helps greatly to mention the socket size your using while performing a certain task
You are correct. I typically do a "tools you need" portion of the video and forgot to do that
When I bought mine, I wasn’t able to put the brake part on. It always had the break engaged, no matter what.
That's strange, could you send me some pictures? The brake should B pushing the pedal back up. I'm guessing something not quite right
brake rod won’t work then you may have mount on wrong side… That happened to me …it’s a lot of work but put that mount on other side use the other side for your brake my!!! If they would just mark the mounts left a right that would be a huge help!!!Time saver for sure!
I got some of these Amazon fwd controls and they just seem loose fitting. They are tight all the way. Is there a way to make them fit better?
@finneyman the brackets themselves are tight and have no issue. The spring washers to keep the footpegs tight are super cheap so I will be getting some that are better quality and that should make them fit tighter.
@@WeekendAdventureRides the brackets seem ok on mine it’s the moving parts on both sides that rattle around. Not the foot peg but the brake lever and shifter parts rattle around
@@finneyman I don't seem to have that problem. You may look at the linkage to see if it's set correctly
How did they hold up after a few rides? Installing mine soon!
I only rode 1 time with the. I live in a very cold and snowy part of the country. I'm not disappointed with them for the price. The only issue I have with them is the spring washer that keeps tension on the peg. I would replace these with better quality ones.
Yep same here in New England,..thats why I’m tinkering now 😂
Just subscribed, cool channel and helped me with installation(a lot)
What parts are aluminum in the kit and what parts are steel?
The brackets, shift lever, and brake lever are cast aluminum. The pegs are steel.
Will these fit on my 2021 softail standard?
Check fitment through manufacturer
Can you list all the tools you used please 🙏
Yes I will add this to the video description, just give me a couple days to put it together.
Thank you!
Crescent / Adjustable Wrench, Screwdriver, Snap Ring Pliers.
The answer is NO. I've bought these twice and have had both the rear brake lever and shifting rod bolts break
Yeah I've heard a few people say to change hardware out
My clutch is sloppy, brake solid scarey sht
You can adjust your clutch...
@WeekendAdventureRides
Wow really bro?
Didn't think you could adjust the cable the Fk'n think wobbles
Not everyone here is a ID10T dude
The ID vs. THE O.D is off,I could machine an insert to take up the inner play.But it's adjust so I am good.
@WeekendAdventureRides
And a heads ups,no need to reuse your old bolts to fill the threaded holes,they supply plastic inserts for you,the 4 little plugs
I wasn't calling you an idiot. Yes, I know what you mean. The shift lever tolerance is terrible.
$600 for 3/4lb steel 😂😂😂
steel is cheap af... no reason HD should be charging that much for those parts.... it's same for a lot of simple steel motorcycle parts... but I guess that's the cost of made in america...?
I agree. I'm considering making my own at this point
You could almost use the OEM brackets for the mid controls, except for the fact that the mounting holes are spaced different! I think the factory did that on purpose!
NO INSTRUCTION what so EVER!!!!!NONE!!!! The video is Fairly good??? How did he know which mount went where...? Hunt an {Peck is what I did an FINALLY they we.re installed@!!!!
Did you have a question?
It is not that complex. Even I could do it and I am not mechanically inclined. If you can identify the part you can find the hole it matches up with and goes in.