Hi Luca! Nice car!!! I am doing this upgrade as well. They are "336mm" brake calipers. And the adapters are now sold differently (they are in one piece). They are tightened (adapters - on the table outside) to 200 Nm (as on the XC90)! And then the whole thing is only tightened to 100 Nm on the car. It is also good to use Loctite glue. Ikona Ověřeno komunitou
I don't do just one project.. I have this Volvo 940 2JZ Build, my Miata drift build, soon another Volvo 245 Wagon budget drift build and first a Nissan Stagea RB26 swap. Mixing the content up a bit ;)
ik ben onder de indruk. normaal walg ik bij het idee van een Nederlander die in het Engels iets presenteert (als Nederlands geboren Brit). Maar je doet het goed gozer! Nejtes ge-edit ook. Kikke. Subscribed. Ik weet niet waar je zit maar je bent in mijn garage welkom met je 2JZ voor een bakkie. Ik heb wat staan dat je leuk vind. PS: Zou deze kit op mijn 245 passen? Lekker bezig. PPS: als je die as met locker nog hebt wil ik die wel!
Hope you drill the drive shafts (10-15cm deep with 10mm drill) to get them stronger so you don't snap them with welded diff. I commented earlier on video about this. Hopefully you read the comments. Nice vid :) I got T5 in my 740 I know what i'm talking about. Also weld peaces on torque metal bar ruclips.net/video/Ad3mJRRwj9w/видео.html.
Check out www.l-m-r.se for some mad Swedish Volvo parts!
✔ Use Discount Code: LCM5 ✔
PS: If you use the complete kit, discs are already redrilled!
Hi Luca! Nice car!!! I am doing this upgrade as well. They are "336mm" brake calipers. And the adapters are now sold differently (they are in one piece). They are tightened (adapters - on the table outside) to 200 Nm (as on the XC90)! And then the whole thing is only tightened to 100 Nm on the car. It is also good to use Loctite glue.
Ikona Ověřeno komunitou
You should buy coilovers
Alebone Next on the list 👌
Luca Car Mods i subscribed cuz of that 200$ volvo and cars 😂😂😂
I don't do just one project.. I have this Volvo 940 2JZ Build, my Miata drift build, soon another Volvo 245 Wagon budget drift build and first a Nissan Stagea RB26 swap. Mixing the content up a bit ;)
nice i have had a job at l-m-r before. I live about 15min from there and they have good things and it's quality on their stuff
Hi I like your videos. kindly share the exact link for the 354 mm big break kit. i cant find it on the website. they only have the small sizes
Can you list where you found adapters and parts for the volvo?
Can't wait for the 2jz 940 upcoming content
Let's just sey you get a 5% disc-ount😉😂
I'll show myself out...
What about disc balance?
Finally a new video! iI have been waiting!
What camera do you use?
Canon 70D, 10-18 lens
Whoop whoop new lcm vid
Lekker schijfje.. welke compressor gebruik je icm luchtsleutel?
And is this going to fit on an 850r???!?
Is een standaard dif niet te zwak voor zo veel vermogen?
ik ben onder de indruk. normaal walg ik bij het idee van een Nederlander die in het Engels iets presenteert (als Nederlands geboren Brit). Maar je doet het goed gozer! Nejtes ge-edit ook. Kikke. Subscribed. Ik weet niet waar je zit maar je bent in mijn garage welkom met je 2JZ voor een bakkie. Ik heb wat staan dat je leuk vind.
PS: Zou deze kit op mijn 245 passen? Lekker bezig.
PPS: als je die as met locker nog hebt wil ik die wel!
Greeting from Georgia
Nice channel and reviews :)
Good luck.
Tbh its my dream to have such a garage and build my own race cars.
Luca, can 17” wheels fit over this brake setup????!?
no you cant, minimal 18 inch. kinda sucks
Oh no, I subscribed 3 days ago and have now watched ALL your uploads, I need my fix !
wait...are you hooking up a trailer to a welded differential?! U crazy man!
GlutteBoy Sure thing haha! More sleeper status.
What do you think about the volvo 850 and it's engine sound?
Tobias Kaczmarek FWD.. meh. T5 engine, I Love It! 🙏🏼
T5 = best sound
You were going to buy a 240 drift car? T5 swap? :D
Hope you drill the drive shafts (10-15cm deep with 10mm drill) to get them stronger so you don't snap them with welded diff. I commented earlier on video about this. Hopefully you read the comments. Nice vid :) I got T5 in my 740 I know what i'm talking about. Also weld peaces on torque metal bar ruclips.net/video/Ad3mJRRwj9w/видео.html.
Cheaper option is hydro boost master cylinder from mustang gt
🔥
T H I C C Brake Kit
Prachtig
👌🏻
You needed to paint the calibers red!
You need to hurry up and manual swap this beast
new video goooooo
Wat is dit, Luca gebruikt passend gereedschap...
Ik dacht al dat ik een Nederlands accent hoorde :p
you dutch right. of zeg ik iets geks
Caspar Hendriksen dat klopt
gebrekkig engels xD
poeh hej
do you think that brake adapter would work on any volvo? like my v50? similar brake setup to your 940