THANK YOU THANK YOU THANK YOU i have been running into issues where i have downloaded everything correctly, only thing that was causing me issues was changing the admin file from everyone to admin. NOBODY else showed that.
I’m gonna try with the nitrado server. I have the mods installed and loaded my game through this single player action I saw someone else do and everytime I play it crashes the game and I get a PBO error I think it is. Someone said it’s an update thing but from what I can see there’s no update needed. I don’t know what I’m doing wrong.
EXCELLENT! This is the only tutorial that actually worked for me and was a dam site easier than the others. Many thanks, will subscribe and start looking for trader/heli tutorials.
On a different note, do you have a facility whereby I can make a contribution to your channel in return for some help with Zomberry Admin and Trader apps?
@@MikeJF355 that's a very kind gesture, but the whole point of me making videos was to save time not having to explaining things to others. I'd end up spending the entire time online at my pc helping others which was knackering...so figured I'd make nonprofit videos (hence no adverts) to help people without taking up my time. Super busy real life. If there's something specific you'd like me to make a clear instruction video on then that might be an option if enough people ask for it. Traders I think will be next when I get a few free hours.
@@hepskie I appreciate what you are saying, I have a couple of companies and am trying to set this up in the middle of the night. If you get the time to do The Trader set up that would be brilliant. There are some other videos on here but they seem to have a slightly different version of Nitrado to me so some of the files/setting are different. Your video worked for me because they appear to be the same. My problem with the Zomberry app is where to put the admin.cfg file so that it is read correctly upon start up. It's a rented server so I don't have access to the main start up files. Other videos are saying put the file in a sub Zomberry folder and label as Server Profiles? I have made such a file within the dayzstandalone file, I've also put one inside the Zomberry file and others all over the place!! It still states upon start up that the Zomberry files are server side but admin is not recognised . In the admin.cfg file I just have my number. Also is there any conflict with Community Tools similar admin tools as I have these running. One last thing, when I spawn say a Hummer in and try and put a wheel etc on to it it sinks into the ground. On a previous post you mentioned that this is caused by the center point of the item and that you can adjust it via ESP tools, how do you do that as there doesn't seem to be any adjustment facility in there. A BIG thank you for your help so far, take care, Mike
A little old of a video but instructions are well done, when I pay attention. I ended up doing twice as the first time I thought I messed up as I heard you as saying N and not END. I only installed on a Expansion Server and there are a few things different. Such as can not do the snow thing that you showed but it looks like all the core functions are there with a few annoying little bugs.
Expansion is a bit different as they customise a few things. The default keys change and there are more options to configure. I'm glad you got it working though!
@@hepskie ok thanks i found the problem becase the END botton is working, so i changed it and now is working fine! Thx for tutorial it helped me a lot! 😃
Hello. I'm using a GTX server running Namalsk. When I look in the config folder, the only file is config.vdf. I've restarted many, many times but still only the one file. Any ideas?
nice. Been trying to follow this, but got stuck at the permissionsframework folder Do you know how can i access that folder on a local pc? i'm trying this on my home server. Also, i don't understand if that json file inside the "players" folder must have the "roles" changed to "admin" to work? would it work anyway without changing it, but for everyone instead?
So the permissions framework folder is in your config folder, which for a regular server is called you 'profiles' folder. That only appears once you started and stopped the server when it's successfully installed. The Players folder will have the guid of any player that joins the server, hence the need to join and leave. You change it to admin for just your guid address. It's usually the only one in there, especially for a local server.
I have another video about installing mods in general that may help too. If you get stuck, feel free to give me a shout on the discord in the description! Good luck :)
I show two ways to get the GUID in the video. The easiest way is to make sure the server is stopped, follow my instructions to install the mod, start the server, again stop the server and then look for you guid file in the players folder. Change 'everyone' to 'admin' in that file and that's job done.
hey man i have got it all working but for some reason my end key wont toggle it on, ive tested the key and it works elsewhere but just not for this. any ideas? thank you
If you don't have a community online tools section in your in-game controls/key bindings then the mod hasn't been installed correctly. If that is the case then go back over the video again, but slowwwerrrr. :)
It's all in the video dude! Follow it slowly and precisely. The only extra thing I can do to help now would be physically doing it for you...but its way better to learn yourself. Make sure you stop the server before changing the file to admin and saving.
Did follow your instruction carefully but after all once in game its shows the menu is toggled off no matter what I press - insert, Y etc. You have a thumb up from me for going in to the details nicely. But it would be even more nice to cover some common issues that people may have is well.
@@hepskie ok thx bro, I'm having a lot of crashes with Dayz Editor and I thought that could use COT to make a cinematics with moving characters #SADKEKW
@@hepskie oh shit don't kidding me, u can try remember pls ? xD I go make test in Simple Cinematics Mod today dude. say for u , when have more conclusions about.
Im using a LAN server as a test server but when i try and install the mods the loading screen says im playing a modded version but my COT and CF won't show up
@@hepskie Yeah LAN Server with a batch file to start it with CF and COT in the batch files and I have the key added to the key files for them. ( Edit I do have a Nitrado server but it is un-modded and down, I would like to get the test server working before fucking with the main server. I have the mods added in my .Bat as "mods=@cf;@Community-Online-Tools;")
@@UltraMaga45 make sure the wording for the mods is exactly the same in your .bat as it is in the folders in your server root other wise they won't connect. Capital letters too. Also, I can't remember if .bat servers need the extra semi colon at the end of the last mod or not....Worth trying both. It might be picking up the first mod and not the last because of this. Let me know if it helps! :)
Hey Hepskie. Thanks heaps for this. Unfortunately I am encountering a number of errors when trying to do this. I've found that my server is constantly resetting every few minutes and it won't show up on the server list at all. Any suggestions as to what may be causing it?
@@hepskie well, initially, it was the same as what you've put in the video. I managed to get it working until I changed the server name.. no restarts now, but no show on server list. Then it's happened again while trying to install the dayz expansion bundle and Dabs framework. Server starts fine, no apparent errors, but constant reset and no show on server list.
@@melekharn7943 make sure you've added all the keys! That often causes that problem. Dayz Expansion can be a bit of a nightmare to install. When it updates they are very large files as well so it takes ages!
@@hepskie Cheers for the tips :) Unfortunately, I'm still having issues with the expansion bundle.. I think I may just have to give up on that one and seek out something else.
@@melekharn7943 there are a few tutorials on how to install expansion...but because it's changed so much the process is quite different to a lot of videos. I think ScalespeedGaming's most recent tutorial might be up to date if you really want Expansion. I'd recommend avoiding it personally.
Go back through the video and make sure you've done everything. It only shows up when the mod is installed and you've restarted the server. Also make sure you restart WINSCP too.
@@hepskie I’ve restarted both winscp and server, I’ve uninstalled everything including the game and reinstalled the only thing that shows up is the zomberry file, @CF shows up on the server and the file along with keys but when I get into game it won’t let me use it even though it says I can
Very good video but im having issues where when it comes down to the config files they dont appear in it. I've started my game closed it like the video said. And they dont appear any ideas?
That suggests that the mod either hasn't been put in the server, you haven't done the key or haven't added the name to the list of mods...double check these three things.
It might be possible to set its position and rotation with ESP Tools (which is included in Community Online Tools) but you'll need to know the coordinates and rotation that you want it. Haven't tried this myself but should work in theory.
Nope but thanks very much! I made them as I had so many people asking me how to host servers so thought sending them a link to this would be easier than explaining to each person
Many thanks! If there is anything you can think of that needs a tutorial that you haven't seen covered, or covered clearly, let me know and I'll whip something up. :)
@@kalanja6221 feel free to drop me a message in discord if you need help with anything! Link in the description. Another good youtube that has a lot of videos is ScalespeedGaming. Worth checking out.
Make sure when adding mods to the mod list you add Community Online Tools at the end. For example: @CF;@otherMods;@Namalsk Island;@CommunityOnlineTools
@@hepskie I have it this way, "-mod=@Namalsk Island;@Namalsk Survival;@CF;@ZomBerry Admin Tools;@Community-Online-Tools" server runs fine and all, but esp doesnt work, or the ability to click on items/objects when in freecam. Something is wrong :(
@@farbrorjosn Put CF first in the list. Esp tools is tricky to use. You need to tick which items you want to see (rifles, pistols etc) and then select how far away you want to see them and after all that you should push the show esp button
You've done something wrong at 3:41 - 6:04. Likely the server was running when you tried to change it to admin and you didn't include the quotation marks "admin" like that.
You've broke the installation down really well probably the best tutorial I have seen on this 👍
Dude thank you so much. No possible way I would have been able to do this without you, subbed and liking every vid!
No worries! I'm glad people are finding these videos useful!
I found your channel yesterday and today I up n running mods Ty🔥🔥 I missed two seconds of the video made a mistake early but rewatch n boom 💪👊👍
Glad it helped you dude!
100% amazing, This tutorial is probably the only one that goes in detail. Thanks.
EXCELLENT VIDEO!!! Thank you for taking the time to explain this. Great video production.
THANK YOU THANK YOU THANK YOU i have been running into issues where i have downloaded everything correctly, only thing that was causing me issues was changing the admin file from everyone to admin. NOBODY else showed that.
I'm glad you managed to sort it.
2nd episode in a row that has been so much more helpful then others. Ty again
No worries! Happy to help.
I’m gonna try with the nitrado server. I have the mods installed and loaded my game through this single player action I saw someone else do and everytime I play it crashes the game and I get a PBO error I think it is. Someone said it’s an update thing but from what I can see there’s no update needed. I don’t know what I’m doing wrong.
EXCELLENT! This is the only tutorial that actually worked for me and was a dam site easier than the others. Many thanks, will subscribe and start looking for trader/heli tutorials.
I'm glad it helped!
On a different note, do you have a facility whereby I can make a contribution to your channel in return for some help with Zomberry Admin and Trader apps?
@@MikeJF355 that's a very kind gesture, but the whole point of me making videos was to save time not having to
explaining things to others. I'd end up spending the entire time online at my pc helping others which was knackering...so figured I'd make nonprofit videos (hence no adverts) to help people without taking up my time. Super busy real life. If there's something specific you'd like me to make a clear instruction video on then that might be an option if enough people ask for it. Traders I think will be next when I get a few free hours.
@@hepskie I appreciate what you are saying, I have a couple of companies and am trying to set this up in the middle of the night. If you get the time to do The Trader set up that would be brilliant. There are some other videos on here but they seem to have a slightly different version of Nitrado to me so some of the files/setting are different. Your video worked for me because they appear to be the same. My problem with the Zomberry app is where to put the admin.cfg file so that it is read correctly upon start up. It's a rented server so I don't have access to the main start up files. Other videos are saying put the file in a sub Zomberry folder and label as Server Profiles? I have made such a file within the dayzstandalone file, I've also put one inside the Zomberry file and others all over the place!! It still states upon start up that the Zomberry files are server side but admin is not recognised . In the admin.cfg file I just have my number. Also is there any conflict with Community Tools similar admin tools as I have these running. One last thing, when I spawn say a Hummer in and try and put a wheel etc on to it it sinks into the ground. On a previous post you mentioned that this is caused by the center point of the item and that you can adjust it via ESP tools, how do you do that as there doesn't seem to be any adjustment facility in there.
A BIG thank you for your help so far, take care, Mike
@@MikeJF355 so I think one thing that should solve the issue here for you is that with all nitrado servers this: config folder=server profiles folder.
A little old of a video but instructions are well done, when I pay attention. I ended up doing twice as the first time I thought I messed up as I heard you as saying N and not END. I only installed on a Expansion Server and there are a few things different. Such as can not do the snow thing that you showed but it looks like all the core functions are there with a few annoying little bugs.
Expansion is a bit different as they customise a few things. The default keys change and there are more options to configure. I'm glad you got it working though!
Perfect, Worked straight way without issues.
I'm glad :)
every time i follow tutorial exactly and my server disappears from server list.
Great video once again Hepskie, good job pal 👍
Cheers Keith! Once again people were asking for something over and over so thought I'd make a video to save myself a bit of time ;)
Hi when i try to open the gui it says toggle gui off, how i turn on?
You need to have made yourself admin for it to be turned on. You can find the controls in key bindings in dayz settings in-game.
@@hepskie ok thanks i found the problem becase the END botton is working, so i changed it and now is working fine! Thx for tutorial it helped me a lot! 😃
@@alenuclear2909 no worries! I'm glad I could be of help!
Hello. I'm using a GTX server running Namalsk. When I look in the config folder, the only file is config.vdf. I've restarted many, many times but still only the one file. Any ideas?
I think the config folder for gtx servers is called something different. Maybe two capital letters?
For sum reason I can’t find the 5Y folder where it says roles and admins?
Nevermind, My bad!!!
@@SallyWalllyy xD
nice. Been trying to follow this, but got stuck at the permissionsframework folder
Do you know how can i access that folder on a local pc? i'm trying this on my home server.
Also, i don't understand if that json file inside the "players" folder must have the "roles" changed to "admin" to work? would it work anyway without changing it, but for everyone instead?
So the permissions framework folder is in your config folder, which for a regular server is called you 'profiles' folder. That only appears once you started and stopped the server when it's successfully installed.
The Players folder will have the guid of any player that joins the server, hence the need to join and leave.
You change it to admin for just your guid address. It's usually the only one in there, especially for a local server.
This man is a sigma male, thank you.
Just decide to run a dayz server pc and found your channel u got a sub from me 👍 I haven't started so wish me luck .any 1st time advise most welcome
I have another video about installing mods in general that may help too. If you get stuck, feel free to give me a shout on the discord in the description! Good luck :)
my GUID doesnt show up so i cant become admin any ideas?
I show two ways to get the GUID in the video. The easiest way is to make sure the server is stopped, follow my instructions to install the mod, start the server, again stop the server and then look for you guid file in the players folder. Change 'everyone' to 'admin' in that file and that's job done.
cheers mate that was exactly what i was after!
Glad to help!
hey man i have got it all working but for some reason my end key wont toggle it on, ive tested the key and it works elsewhere but just not for this. any ideas? thank you
Look in key bindings under community online tools (COT) and it should tell you. (In-game)
@@hepskie sorry i don’t quite understand, can i change the key binding to another key in COT settings?
@@GR8Saiyan yes
@@hepskie Thank you ill try and work that out tonight 🤙🏼
If you don't have a community online tools section in your in-game controls/key bindings then the mod hasn't been installed correctly.
If that is the case then go back over the video again, but slowwwerrrr. :)
how do you make yourself a admin now? I put admin in the file but it deletes it once i load in my nitrado and no admin tools
It's all in the video dude! Follow it slowly and precisely. The only extra thing I can do to help now would be physically doing it for you...but its way better to learn yourself. Make sure you stop the server before changing the file to admin and saving.
Did follow your instruction carefully but after all once in game its shows the menu is toggled off no matter what I press - insert, Y etc. You have a thumb up from me for going in to the details nicely. But it would be even more nice to cover some common issues that people may have is well.
So that means the mod is installed correctly but you didn't make your ID admin. Make sure you stop the server before you do the changes
how i walk with free cam (INS) ativated dude??
is there any possibility to do this?
Don't think so. You can teleport with H though.
@@hepskie ok thx bro, I'm having a lot of crashes with Dayz Editor and I thought that could use COT to make a cinematics with moving characters #SADKEKW
@@GingasGames yeah dayz editor doesn't like to play ball much. There were a few other cinematic mods out there but can't remember their names.
@@hepskie oh shit don't kidding me, u can try remember pls ? xD
I go make test in Simple Cinematics Mod today dude.
say for u , when have more conclusions about.
good video but you don't explain how you get the file of the serveurs to draw the mod in ?
Not really sure what you mean dude!? Could you rephrase?
Im using a LAN server as a test server but when i try and install the mods the loading screen says im playing a modded version but my COT and CF won't show up
So LAN server with .bat file to start it and server files on your pc etc? Or a 'LAN' server with nitrado?
@@hepskie Yeah LAN Server with a batch file to start it with CF and COT in the batch files and I have the key added to the key files for them. ( Edit I do have a Nitrado server but it is un-modded and down, I would like to get the test server working before fucking with the main server. I have the mods added in my .Bat as "mods=@cf;@Community-Online-Tools;")
@@UltraMaga45 make sure the wording for the mods is exactly the same in your .bat as it is in the folders in your server root other wise they won't connect. Capital letters too. Also, I can't remember if .bat servers need the extra semi colon at the end of the last mod or not....Worth trying both. It might be picking up the first mod and not the last because of this. Let me know if it helps! :)
@@hepskie Yeah I just did a full re-install and everythings up and running now.
@@UltraMaga45 I'm glad you sorted it out!
Hey Hepskie. Thanks heaps for this. Unfortunately I am encountering a number of errors when trying to do this. I've found that my server is constantly resetting every few minutes and it won't show up on the server list at all. Any suggestions as to what may be causing it?
Which mod have you tried to install?
@@hepskie well, initially, it was the same as what you've put in the video. I managed to get it working until I changed the server name.. no restarts now, but no show on server list. Then it's happened again while trying to install the dayz expansion bundle and Dabs framework. Server starts fine, no apparent errors, but constant reset and no show on server list.
@@melekharn7943 make sure you've added all the keys! That often causes that problem.
Dayz Expansion can be a bit of a nightmare to install. When it updates they are very large files as well so it takes ages!
@@hepskie Cheers for the tips :) Unfortunately, I'm still having issues with the expansion bundle.. I think I may just have to give up on that one and seek out something else.
@@melekharn7943 there are a few tutorials on how to install expansion...but because it's changed so much the process is quite different to a lot of videos.
I think ScalespeedGaming's most recent tutorial might be up to date if you really want Expansion.
I'd recommend avoiding it personally.
My framework folder won’t show up how do I fix that
Go back through the video and make sure you've done everything. It only shows up when the mod is installed and you've restarted the server. Also make sure you restart WINSCP too.
@@hepskie I’ve restarted both winscp and server, I’ve uninstalled everything including the game and reinstalled the only thing that shows up is the zomberry file, @CF shows up on the server and the file along with keys but when I get into game it won’t let me use it even though it says I can
@@jameshalliday6497 this is for community online tools, not zomberry. Not a clue how that works.
@@hepskie well I think I’ll try that one 🤣
Very good video but im having issues where when it comes down to the config files they dont appear in it. I've started my game closed it like the video said. And they dont appear any ideas?
That suggests that the mod either hasn't been put in the server, you haven't done the key or haven't added the name to the list of mods...double check these three things.
When I try spawning in Buildings they spawn half ways in the ground, Why?
Because the spawn point of the item is set to it's center for some reason.
You can use ESP tools to change its height though!
When I added mods and tried to load game it says missing PBO files
Did you add the keys?
Did you put the mod names in the list correctly (@mod1;@mod2;@mod3)!?
@@hepskie yes I got that added into the nitrado site
I copied all your first steps so I'm confused why its not working
@@DirtyDanGamingYT it sounds like one of your mods might be out of date
@@hepskie I used community online tools & cf
Anyone know how to move objects such as buildings/houses once spawned? Would be appreciated thanks!
It might be possible to set its position and rotation with ESP Tools (which is included in Community Online Tools) but you'll need to know the coordinates and rotation that you want it. Haven't tried this myself but should work in theory.
@@hepskie Thanks for such a quick reply. I'll give that a shot. Thank you!
i dont have an end key how can i change it?
In-game settings. Change the key bindings. Should be under community online tools if you scroll down.
You have a place to donate? These guides are worth it
Nope but thanks very much!
I made them as I had so many people asking me how to host servers so thought sending them a link to this would be easier than explaining to each person
another great video!!!
Many thanks! If there is anything you can think of that needs a tutorial that you haven't seen covered, or covered clearly, let me know and I'll whip something up. :)
@@hepskie my buddy and i are trying to learn how to mod and run a server properly so any info is a lot of help.
@@kalanja6221 feel free to drop me a message in discord if you need help with anything! Link in the description.
Another good youtube that has a lot of videos is ScalespeedGaming. Worth checking out.
@@hepskie just joined the discord. My user name is the same as my account on here Kalanja. We can for sure use some help lol
cool back ground music...
I’ve done everything the same as the video but my server doesn’t register that there’s mods in it, i’ve followed every step so not sure whats going on
i followed everything loaded into the server and theres no player files?
On my namalsk server while using the admin tools i dont have a "namalsk option" in menu :( How to fix that?
Make sure when adding mods to the mod list you add Community Online Tools at the end. For example:
@CF;@otherMods;@Namalsk Island;@CommunityOnlineTools
@@hepskie I have it this way, "-mod=@Namalsk Island;@Namalsk Survival;@CF;@ZomBerry Admin Tools;@Community-Online-Tools" server runs fine and all, but esp doesnt work, or the ability to click on items/objects when in freecam. Something is wrong :(
@@farbrorjosn Put CF first in the list.
Esp tools is tricky to use. You need to tick which items you want to see (rifles, pistols etc) and then select how far away you want to see them and after all that you should push the show esp button
When I press the end key it just says off anytime i press the end key how do i fix this please
You've done something wrong at 3:41 - 6:04. Likely the server was running when you tried to change it to admin and you didn't include the quotation marks "admin" like that.
@@hepskie thankyou all sorted