Installing the Carburetors, Exhaust, and Intake system \\ Raptor 660 Top End Rebuild
HTML-код
- Опубликовано: 28 авг 2024
- Carburetor Install Starts at 4:40. This is a very in-depth video on install all the stuff mentioned in the title, as always ask anything below if you have any questions/comments/concerns!
RAPTOR 660 SERVICE MANUAL PDF:
drive.google.c...
Man thank you so much for the videos on the raptor!!!! I’m not the best mechanic and don’t know everything about 4 wheelers and don’t really have people to help me figure things out…. So thank you again and please keep making these educational videos on the raptor!!!
Don't plan on stopping anytime soon!
So I've watched all of your videos in the Raptor series and put all of the wisdom you've passed down to me into making the ultimate microwave. Not only am I able to play games over 200fps, I am able to cook my microwave hotpockets in mere seconds along with being able to take my girlfriend for rides on it over the weekends. Mudding has never been the same with my modded eletrolux 9000 microwave with custom timings. She purrs like a kitten with your tips on the intake system. Thanks Hunter's Mechanics!
These help out when working on my 04 660
Thanks for all the helpful videos
No problem buddy!
Thanks for the video, very helpful.
Just wondering Would you be able to make a video rewiring the harness. Can’t find any videos on RUclips and the wiring diagram is impossible to read. I’ll really love to see you do it since you can explain every detail. Thanks for your help.
I plan on just buying a new hardness eventually because mine is junk and honestly far too gone to repair some of it unless I bought enough wiring to do it all, is there anything specific for the wiring that you'd like to see?
I wanna see the same thing from headlights taillights I’ve struggled so much with mine I had it all together and had a spark all the lights working all switch was working and then I taped it up and nothing I’m pulling my hair out trying to figure it out
Show me wiring harness set up Having trouble finding out where wires go especially from the battery box
For the choke cable to the carb do you have like a gold thing down inside the hole I got brand new carb throw onto my raptor and like I don't have enough room put choke cable on to even tighten it.
I have the same issue, did you resolve this by chance?
@Francisco Legarda yeah their was stuff still down inside it. That didn't see had remove it and then cable was easy after words.
Meu raptor 660 ano 2005
What year is this raptor please? Can I use a 2004 air filter on a 53 plate 660?
I’m tuning up my father in laws 2001 660r. He had a new carb on it, but it doesn’t seem to have the fuel/air needles that can be adjusted from the bottom with the carb installed. I ordered a set, but I can’t figure out the order of the o rings and washers on them. Any ideas?
www.motosport.com/oem-parts/yamaha/2001/raptor-660/carburetor-rn
That should be able to assist in seeing what the part order is
Bom dia !
Preciso uma ajuda!
Meu quadriciclo raptor Yamaha 660 ele funciona normal mas quando vou acelerar ele começa estourar perder força.. já troquei vela ignição, já troquei bobina ignição, carburador já foi limpo, não sei mas o que fazer..?
Você já fez um ajuste de válvula nele? Alguma outra modificação foi feita, como um novo escapamento ou caixa de ar?
Parece-me depois de todos os comentários que recebo, o ajuste da válvula é o item de manutenção que mais falta e causa muitas dores de cabeça. Se você substituiu a bobina, verifique novamente os carburadores quanto a quaisquer detritos dentro dos jatos principais. Tenho um vídeo no meu canal sobre desmontagem e limpeza dos carburadores caso precise acompanhar! :)
i just got a new carb and i need to tune it but dont know how and its for a 2003 yamaha raptor 660
I've got a video on my channel for it
I cant the carbs to stay in the boots on my raptors. Get them tight and barley push on them and they fall out. Its really annoying lol
I kept running into that when it was grabbing the hose clamps, I loosened the shit out of the clamps and shoved them in there and they kinda "popped" in place and I could tighten them without having to push on them
@@Hunters_Mechanics got them in thanks. Thought I had the clamps all the way open but not quite lol
I am actually attempting to change my OG 09 ninja 250cc carb with this specified carb and I'm having trouble finding a way to connect the throttle and choke to it but boots fit accordingly any advice?!
Have you tried using the throttle and choke that was originally made for those carbs? Thats the only way I'd know to ensure a perfect fit for cables, I haven't done any different carb swaps other than for older trucks which is a pain itself
So I've just bought a raptor 660 special edition. Being there no heat shield I'd like to wrap my pipes. My ? For u is it's just the 4 bolts to the Head and the back clap to the slip on ya? I won't need to do anything else by removing the exhaust?
If you remove the exhaust you should 100% replace the exhaust gaskets because they will almost guarantee to leak if used again, but yes, 4 bolts at the head, there is one for the seconday pipe and the bolt for the slip on
@@Hunters_Mechanics easy peasy lemon squeezy, thank u much.
Where did you get those gaskets for the exhaust them to gaskets that you sent inside the motor before you V up the exhaust
I get mine from the local Yamaha dealer, but you can also order them online from any yamaha retailer. Part Number: 3YF-14613-01-00
I can't afford it I've spent 2 grand on the bike
Where is your local Yamaha dealer
@@jameskelton645 I mean you can buy the cheap ones off eBay or Amazon but I would not recommend them, I've had two different ones fail and haven't had the OEM ones fail on me. And unless you're near West Virginia I doubt my dealer would be local to you lol
I snapped one of the studs while installing a new header how can I replace it
Your best bet is a bolt extractor kit, I've only used them once so I can't give you much advice on them. I replaced my studs with new oem ones from rockymoutain after successfully getting all 4 of them out
What kind of carb is on that? Amazon? If so how are they?
www.amazon.com/gp/product/B072ZZHRXK/ref=ppx_yo_dt_b_asin_image_o08_s00?ie=UTF8&psc=1
@@Hunters_Mechanics how do you like it ? Is it straight bolt on or?
@@christianssoldiers4058 It fixed the leaking bowl issue I had on mine and came with everything need to bolt-on, took a good while to tune it right but she works good now!
@@Hunters_Mechanics Kool thnx man
did you ever find out if that was a breather rube or does it connect to somn. I'm trying to figure that one out
Its been a while since I've made this video, which one are you wanting to know?
@@Hunters_Mechanics the extra tube on the top of you're carburetor you was wondering if it was a breather or if it connected to something. did you figure out it was a breather or something else
@@justgettnit614 its the breather for the bowls on the carbs, I still have yet to figure out where its supposed to be routed to though, I still run it into the snorkel for the airbox
yeah I've been looking it up and I found out from manual it's a breather.
@@justgettnit614 it connects to the airport lid. There's a port on the lid and it plugs on with no clamp,
Hey,
We followed your video exactly and checked the valve gauges with the measurements specified. We also aligned the timing belt properly and put everything on right. It still won't start. It makes a noise like it wants to turn on but it just won't.
Do you think it could it be the stator? The regulator? Or the CDI box?
Does your relay click at all? Does the starter attempt to to turn the engine over at all?
Yes it does make a clicking sound and the starter is new. Do you mean the starter clutch or the engine starter. If even one of the valves isn't properly gauged, can that be the cause?
@@jutormann8125 the engine starter, does it rotate the engine at all? And no it will still turn over but if it's not right it could cause damage (but itd had to be REALLY far off), how old is the relay as well
@@Hunters_Mechanics the engine does turn over
And the relay is new but it was a ten dollars one I got on ebay
@@jutormann8125 well if the engine turns over, hopefully fast enough, it should run. Have you checked for spark?
Did u ever find out what was causing the coolant problem?
A cheap head gasket and a warped head
What did u do to repair this problem
And what head gasket did u end up getting
@@jordanadkins2744 it was some cheap kit off of ebay, im running only oem from now on
I don’t think they make a gasket that would fit on my 686 niche 102mm 11:1 big bore kit. Is it worth putting it on my grizzly 660 or should I just rebuild the top end stock