My car used to need 4 cans of plasti dip and I had to redo it every year or so. The plasti dip is also pretty expensive in Australia ($30 AUD/can). Thanks to your video, I switched to VHT, only 2 cans needed and I think that'll be all I will ever need.
Yea i tried the plastidip on my 4runner and didnt like how it would hold the dirt sometime especially in the summer(haha i know you know all about that heat in australia). Thanks guy im glad my video helped!
I've painted wheels before myself. I've found it's a lot better to take them off the vehicle to paint them. If the still have tires on them, get a cheap deck of playing cards from the dollar store and stick the narrow side of them between the wheel and tire. A WHOLE LOT EASIER than trying to use plastic bags, paper or taping around the wheel, and much better results. It's so easy and quick to do too.
Thanks @tonycox. I'm in the Walmart paint section trying to figure out how to cover my wheels the dealership destroyed with wheel cleaner while washing it. They're 12 years old and fading but it didn't look bad. Now they look like shit. While looking for a deck of cards, I found 100 count 3"x5" index cards for 72 cents. These are a litte bigger and should work perfect. Thanks again for the idea.
@@southerngearz They look factory and professional. I dont like that fake rubber stuff they put on. It dont last long at all. My friend had it on his rims and only lasted like 2 months.
Spray as heavy as you want guys! When paint has an uneven surface, applying a hairdryer while it's still wet, will flatten it out. This has made painting my rims so much easier. The heat also helps it dry faster. This is a must for me because I live in humid ass Florida and that's bad for painting.
There is a clear coat on the wheels and you will need to rough it up so it will stick. I recommend a red scotch brite that you can get from any parts store in the paint section. Only other option is to use plastidip but i dont recommend that because it ends up looking terrible over time.
Originally i said two cans but i would recommend 3 cans just so you dont feel you need to conserve. I did need a touch up actually today i did it. I have a car show so i wanted to make sure they were "perfect" and i noticed some light spots that I missed. As far as appearance they looked great except I went with satin and satin likes to hold onto things. So when i touched up I went with glossy and just repainted all the wheels.
@@southerngearz thanks for the info, I got two cans but I’ll grab another one just in case, once I have some time this week I’m gonna do the same thing to mine, yours looked great 👍
One other thing if you didnt see it. I used satin paint so if you want it really shiny gloss would be best. However i did find one great thing about that satin vht is that it vanishes on tires completely.
@@southerngearz I appreciate the quick response. I get all my supplies saturday and will definitely try this. What grit sand paper would you recommend?
I did two light coats then a heavy coat. Nah you dont have to sand just scuff up the area with a red scotch brite(auto parts store) and then clean the area with a degreaser or alcohol.
@@southerngearz Do you mean brake dust and stuff? I've got PlastiDip on atm and I just bought some of this stuff for a glossier and more permanent style
@@JontiFlashman yea the satin would grab brake dust and road grime. The gloss works great though havent had a single issue with dirt and its not affected by wheel cleaners other than making the wheels clean.
@@southerngearz Sounds great - just watched your update video. Thanks for making these videos, I've left likes on all the ones I watched so hopefully the algorithm helps you out soon!
Авто/Мото
My car used to need 4 cans of plasti dip and I had to redo it every year or so. The plasti dip is also pretty expensive in Australia ($30 AUD/can). Thanks to your video, I switched to VHT, only 2 cans needed and I think that'll be all I will ever need.
Yea i tried the plastidip on my 4runner and didnt like how it would hold the dirt sometime especially in the summer(haha i know you know all about that heat in australia). Thanks guy im glad my video helped!
Looks way cooler. The aluminum just looks like a rental car. Black is awesome. I’m thinking o might do my Landcruiser in copper hammer finish.
Sorry it took so long but that sounds like it would look awesome
I've painted wheels before myself. I've found it's a lot better to take them off the vehicle to paint them. If the still have tires on them, get a cheap deck of playing cards from the dollar store and stick the narrow side of them between the wheel and tire. A WHOLE LOT EASIER than trying to use plastic bags, paper or taping around the wheel, and much better results. It's so easy and quick to do too.
I like that playing card method i will have to remember that one!
Good idea with the cards cause I'm trying to save a lot of time doing this to my rims.
Thanks @tonycox.
I'm in the Walmart paint section trying to figure out how to cover my wheels the dealership destroyed with wheel cleaner while washing it. They're 12 years old and fading but it didn't look bad. Now they look like shit. While looking for a deck of cards, I found 100 count 3"x5" index cards for 72 cents. These are a litte bigger and should work perfect. Thanks again for the idea.
Thank you!! This was exactly what I wanted to do.
No problem good luck in your painting
Thanks for the video , gonna paint my brand new blizzard pearl highlanders rim now
Thanks guy! Haha they are going to look great!
Great work my guy
Thank you!
Looking good I'm going to paint mine too 😁
Thanks guy
Do you have to sand it?
nice bro how’s it holding up? got the same kind but don’t know if i’m going to use a 2k clear over it
Its holding up well a 2k clear would be nice i may still do that
Hi, thanks for making this video. The wheels looks great. Did you use gloss black or satin black in this video?
I went with the gloss i originally went with satin but it seemed to hold the dirty really well
What wheel cleaner you use on these when you wash the car ?? I just don't wanna use anything that will melt the paint off lol
I just use whats left in my bucket when washing my car. I have a wheel brush i use to get most then a rag afterwards to catch anything i missed.
Would i still need 1 can per 2 tyres with smaller alloy size?
Yea probably add a few extra layers for more durability
🔥🔥🔥🔥
Good job bro
Thanks guy
Was primer needed ? I’m trying to do this today to my chrome wheels
I didnt use primer just scuffes up the surface with a red scotch brite pad
I need it to touch up my already black rims but u did a excellent job on your rims
Thanks guy!
I wanted to c how that paint looked before I put it on and thats perfect
@@treyvon4444 yea i was surprised it turned out so well
@@southerngearz They look factory and professional. I dont like that fake rubber stuff they put on. It dont last long at all. My friend had it on his rims and only lasted like 2 months.
@@treyvon4444 oh yea that plastidip sucks it likes to hold dirt and dust.
Spray as heavy as you want guys! When paint has an uneven surface, applying a hairdryer while it's still wet, will flatten it out. This has made painting my rims so much easier. The heat also helps it dry faster. This is a must for me because I live in humid ass Florida and that's bad for painting.
the rims of my car is very glossy and every time i try to paint it, it’s starts to drip and doesn’t stick what helps ? 😭
There is a clear coat on the wheels and you will need to rough it up so it will stick. I recommend a red scotch brite that you can get from any parts store in the paint section. Only other option is to use plastidip but i dont recommend that because it ends up looking terrible over time.
Use adhesion promoter scuff with a red scotch Brite use first coat as a tack coat=light coat
Satin black or not
Peyton Mannings youtube channel!
🤣🤣🤣🤣🤣that was a good one
Think I could do this to my chrysler 300 stock wheels ?
Sure can just a little hard work
Do you basically paint bolts as well?
In that particular situation yes but I recommend if you can remove the wheels to do so because its just a better way.
Won’t the paint chip and get scratched over time and expose the original metal underneath?
Applying a protective clear coat after the actual painting process will prevent that
Dope
How many cans of paint did you use
i recommend at least 2 per side if you want a good thick coating
Does vht work well with hubcaps?
Not sure really i imagine it would work as well as any other spray paint with the added chemical resistance.
Nice 2g4r I have a 95
Thanks guy I wish I still had her but sadly she was sacrificed to complete the s10.
I saw someone use index cards in place of the blue tape....worked great but i never tried it.
Yea i could see that working
I plan on doing this and using cards, quicker than taping, but still need to tape the caps and stems
I just did it with cards. Works good. I just went to Home Depot and took like 30 of their paint sample cards and used those. They are free
@@JoshuaDay0550 yep I used some my kids old index cards they worked great.
Just curious how many spray cans did you need to finish up? And did the finish last, have had to go over it anymore since?
Originally i said two cans but i would recommend 3 cans just so you dont feel you need to conserve. I did need a touch up actually today i did it. I have a car show so i wanted to make sure they were "perfect" and i noticed some light spots that I missed. As far as appearance they looked great except I went with satin and satin likes to hold onto things. So when i touched up I went with glossy and just repainted all the wheels.
@@southerngearz thanks for the info, I got two cans but I’ll grab another one just in case, once I have some time this week I’m gonna do the same thing to mine, yours looked great 👍
@@briengakaplan-b1550 thanks guy and thanks for watching
Sorry what do u mean satin likes to hold onto things ? Like after I paint it will things get stuck onto it ?
And when u repainted u used a different type of paint not satin ?
Oh btw how is it holding up and do it still have a shine or did it fade?
Still as fresh as day one
@@southerngearz great 😁
One other thing if you didnt see it. I used satin paint so if you want it really shiny gloss would be best. However i did find one great thing about that satin vht is that it vanishes on tires completely.
@@southerngearz yeah I want it real shiny so that would be my choice..I'll try to get started on it this coming weekend and thanks again 😁
@@trini_boi2414 no problem guy
no clear coat?
None
Quick spray action is wrong.Lift can back and forth lightly with long spray strokes not short stop start ones.
Thanks i will try that next time
@@southerngearz no worries brother
what happens if you power wash your vehicle ?
Haha it gets cleaner. Nah seriously it doesnt effect it.
@@southerngearz I appreciate the quick response. I get all my supplies saturday and will definitely try this. What grit sand paper would you recommend?
I used a red scotch brite which is 320 grit. It conforms to the curves and you can get it from autozone or any auto parts store. Good luck guy
How many coats
I did two light coats then a heavy coat. Nah you dont have to sand just scuff up the area with a red scotch brite(auto parts store) and then clean the area with a degreaser or alcohol.
did u remove your lug nuts? it looks like it but my screen is hella small.....
Nah I left them but the next time i removed them I painted them better
So you just paint over the lug nuts?
You can or tape them up i chose to paint mine since they didnt look very good and you can barely see them
@@southerngearz thanks! My wheels need painting and I did not want to take the whole tire off one by one.
did u use primer first?
I did not
@@southerngearz ok. thank u. vht is self priming paint?
1 can per tire?
I would say 1 can per two for a good thick layer. It took me 1.5 cans in the end.
im going to do this on my s550 mustang 3.7 rims for sure
Its still holding up.
How has it lasted?
It has held up well but I did sand them and respray them because i didnt care for the satin finish catching everything.
@@southerngearz Do you mean brake dust and stuff? I've got PlastiDip on atm and I just bought some of this stuff for a glossier and more permanent style
@@JontiFlashman yea the satin would grab brake dust and road grime. The gloss works great though havent had a single issue with dirt and its not affected by wheel cleaners other than making the wheels clean.
@@southerngearz Sounds great - just watched your update video. Thanks for making these videos, I've left likes on all the ones I watched so hopefully the algorithm helps you out soon!
Was the VHT gloss black or satin black?
It was satin
How many cans will it take for all 4 wheels?
Two cans would be plenty
@@southerngearz right on. Thank you
How’s it holding up
Its holding up great but i do recommend taking the wheels off if you can. I missed alot of spots because i had a bunch of spokes.
Southern Gearz yeah that’s what’s I’m planning on doing. Thank you though good video!
Thanks guy
Southern Gearz you welcome babe ❤️😘🥰
Is that the satin?
Yea it is
5:20 💀💀💀💀
Confused why you didn't just do them all at once lol.
I little bit of lazy i think
What a pain in the a$$
It can be
Way easier to just remove the wheel.
Your method of spraying....
I would recommend removing them much easier.
All those spokes drove me crazy i found light spots in places