How to Repair Broken Hinge of HP 17-BS019dx
HTML-код
- Опубликовано: 20 авг 2024
- Guide How to repair laptop Hinges
HP 17-BS019DX Hinge Problem
Like, Subscribe and Learn on our RUclips Channel
LCD Republic Tutorial
RUclips Channel: / @lcdrepublictutorial
For your Inquiries
Message or Call us @
FB Page:
LCD Republic Laptop Service Center
LCD Republic Diamond Arcade
Website: www.lcdrepublic.com
Viber: 09178364606
Skype: lcd.republic
Wechat: JerryAnduque
Lazada: LCD Republic, LCDR Diamond Arcade
Shopee: lcdrepublic, lcdrdiamondarcade
Globe: 09178364606
Smart: 09985543510
Landline: 02-5772414
Location: LCD republic 3/F Diamond Arcade Bldg.
Aurora Blvd. Cubao Quezon City Philippines
Landmark: LRT 2 -Cubao Station Near Gateway Mall
LCD Republic Laptop Service Center
Is One of the Leading and Cheapest Laptop Parts Supplier in the Philippines
Thank you for Watching!
Your information and methodology worked perfectly on a HP 17Z-AK000. My only feedback is give some guidance on replacing the tape. The tape on my laptop had lost it's adhesive, so I used packing tape to rescuer the screen cable/connector to the new screen. Thank you!!!
Followed this all the way through, worked perfectly. Thank you!
Thank you for watching
Thank you for watching
I find it unbelievable that the ENTIRE computer has to be disassemble to fix the lid hinge. Poor engineering, it my opinion. Bad plastic parts that make it easier to just buy a new computer is so wasteful. Thanks for the video, though!
you would think that if one could design and build a laptop one could make a hinge that would work for more than 18 months
Mine broke in a month! I’m moving away from HP entirely. They have too many issues.
Thanks for the video. I used JB Weld Plastic Bonder and it seems to have made a very strong bond. I also loosened up the hinge tension so that the lid would close easier. I did have to trim off a section of the cover that goes over the lcd screen. I put a lot of the epoxy on, and it was causing the cover to not sit flush. This was causing it to catch on the lower section of the laptop when opening the lid. Now it is almost as good as new.
At certain points of the video I was not able to see clearly what you were doing. I have the same issue currently with my laptop. I hope you can make another video showing the steps clearly. Thank you.
Love the music and the demonstration of repair. Very helpful.
Thanks for this video. It shows this repair isn’t straightforward at all
Is there anyway to get around taking out the motherboard to replace the hinges and top cover? I’d love to avoid that step if possible
Problem solved, time to buy a new PC
The video is very helpful. One question. What is the epoxy or glue you are using?
Thank you for watching
When you do a video on how to repair something it's not a good idea to speed through the most critical part of the repair, that being the hinge portion of the bracket and how to remove it and put it back on correctly
You can always slow down the video.
@@itftcomputers You can slow it down but the object of a video on how to do something is to make it easy for the viewer.
@@Kwilson3828 Oh that's typical! No surprise here.
Very useful
What are the rings you are placing in the holes where screws go? Where do you get them and what size?
very poor showing the person did not actually how to r repair the hinge, I hope some want else show mo3re patience
Hello thanks for the video. I have a question: why do you take off the motherboard? Is it necessary? thanks
No, the fan and heat sink are all that are necessary to come out, not the whole motherboard.
A bit hard to see some things you are removing due to the camera being so close up, should back off a bit to show better detail. thanks though for the tear down.
the most important part is missing it is puling cables through hinges and fixing them on board.
this laptop takes ssd nvme?
Who do these videos always have the most horrible music?
Sorry and thank you sir we were assure you that we will replace it on our next video